[UPDATED] GATE Engineering Sciences (XE) Syllabus pdf free download

GATE Engineering Sciences (XE) Syllabus :-

A: Engineering Mathematics (Compulsory)

Section 1: Linear Algebra

Algebra of matrices; Inverse and rank of a matrix; System of linear equations; Symmetric, skew-symmetric and orthogonal matrices; Determinants; Eigenvalues and eigenvectors; Diagonalisation of matrices; Cayley-Hamilton Theorem.

Section 2: Calculus

Functions of single variable: Limit, continuity and differentiability; Mean value theorems; Indeterminate forms and L’Hospital’s rule; Maxima and minima; Taylor’s theorem; Fundamental theorem and mean value-theorems of integral calculus; Evaluation of definite and improper integrals; Applications of definite integrals to evaluate areas and volumes.

Functions of two variables: Limit, continuity and partial derivatives; Directional derivative; Total derivative; Tangent plane and normal line; Maxima, minima and saddle points; Method of Lagrange multipliers; Double and triple integrals, and their applications.

Sequence and series: Convergence of sequence and series; Tests for convergence; Power series; Taylor’s series; Fourier Series; Half range sine and cosine series.

Section 3: Vector Calculus

Gradient, divergence and curl; Line and surface integrals; Green’s theorem, Stokes theorem and Gauss divergence theorem (without proofs).

Section 4: Complex variables

Analytic functions; Cauchy-Riemann equations; Line integral, Cauchy’s integral theorem and integral formula (without proof); Taylor’s series and Laurent series; Residue theorem (without proof) and its applications.

Section 5: Ordinary Differential Equations

First order equations (linear and nonlinear); Higher order linear differential equations with constant coefficients; Second order linear differential equations with variable coefficients; Method of variation of parameters; Cauchy-Euler equation; Power series solutions; Legendre polynomials, Bessel functions of the first kind and their properties.

Section 6: Partial Differential Equations

Classification of second order linear partial differential equations; Method of separation of variables; Laplace equation; Solutions of one dimensional heat and wave equations.

Section 7: Probability and Statistics

Axioms of probability; Conditional probability; Bayes’ Theorem; Discrete and continuous random variables: Binomial, Poisson and normal distributions; Correlation and linear regression.

Section 8: Numerical Methods

Solution of systems of linear equations using LU decomposition, Gauss elimination and Gauss-Seidel methods; Lagrange and Newton’s interpolations, Solution of polynomial and transcendental equations by Newton-Raphson method; Numerical integration by trapezoidal rule, Simpson’s rule and Gaussian quadrature rule; Numerical solutions of first order differential equations by Euler’s method and 4th order Runge-Kutta method.

B: Fluid Mechanics

Section 1: Flow and Fluid Properties

Viscosity, relationship between stress and strain-rate for Newtonian fluids, incompressible and compressible flows, differences between laminar and turbulent flows. Hydrostatics: Buoyancy, manometry, forces on submerged bodies.

Section 2: Kinematics

Eulerian and Lagrangian description of fluids motion, concept of local and convective accelerations, steady and unsteady flows.

Section 3: Integral analysis

Control volume analysis for mass, momentum and energy.

Section 4: Differential Analysis

Differential equations of mass and momentum for incompressible flows: inviscid – Euler equation and viscous flows – Navier-Stokes equations, concept of fluid rotation, vorticity, stream function, Exact solutions of Navier-Stokes equation for Couette Flow and Poiseuille flow.

Section 5: Inviscid flows

Bernoulli’s equation – assumptions and applications, potential function, Elementary plane flows – uniform flow, source, sink and doublet and their superposition for potential flow past simple geometries.

Section 6: Dimensional analysis

Concept of geometric, kinematic and dynamic similarity, some common non-dimensional parameters and their physical significance: Reynolds number, Froude number and Mach number.

Section 7: Internal flows

Fully developed pipe flow, empirical relations for laminar and turbulent flows: friction factor and Darcy-Weisbach relation.

Section 8: Prandtl boundary layer equations

Concept and assumptions, qualitative idea of boundary layer and separation, streamlined and bluff bodies, drag and lift forces. Flow measurements: Basic ideas of flow measurement using venturimeter, pitot-static tube and orifice plate.

C: Materials Science

Section 1: Processing of Materials:

Powder synthesis, sintering, chemical methods, crystal growth techniques, zone refining, preparation of nanoparticles and thin films

Section 2: Characterisation Techniques:

X-ray diffraction, spectroscopic techniques like UV-vis, IR, Raman. Optical and Electron microscopy

Section 3: Structure and Imperfections:

Crystal symmetry, point groups, space groups, indices of planes, close packing in solids, bonding in materials, coordination and radius ratio concepts, point defects, dislocations, grain boundaries, surface energy and equilibrium shapes of crystals

Section 4: Thermodynamics and Kinetics:

Phase rule, phase diagrams, solid solutions, invariant reactions, lever rule, basic heat treatment of metals, solidification and phase transformations, Fick’s laws of diffusion, mechanisms of diffusion, temperature dependence of diffusivity

Section 5: Properties of Materials:

Mechanical Properties: Stress-strain response of metallic, ceramic and polymer materials, yield strength, tensile strength and modulus of elasticity, toughness, plastic deformation, fatigue, creep and fracture

Electronic Properties: Free electron theory, Fermi energy, density of states, elements of band theory, semiconductors, Hall effect, dielectric behaviour, piezo, ferro, pyroelectric materials

Magnetic Properties: Origin of magnetism in metallic and ceramic materials, paramagnetism, diamagnetism, ferro and ferrimagnetism

Thermal Properties: Specific heat, thermal conductivity and thermal expansion, thermoelectricity

Optical Properties: Refractive index, absorption and transmission of electromagnetic radiation in solids, electrooptic and magnetoopticmaterials, spontaneous and stimulated emission, gas and solid state lasers

Section 6: Material types

Concept of amorphous, single crystals and polycrystalline materials, crystallinity and its effect on physical properties, metal, ceramic, polymers, classification of polymers, polymerization, structure and properties, additives for polymer products, processing and applications, effect of environment on materials, composites

Section 7: Environmental Degradation

Corrosion, oxidation and prevention

Section 8: Elements of Quantum Mechanics and Mathematics

Basics of quantum mechanics, quantum mechanical treatment of electrical, optical and thermal properties of materials, analytical solid geometry, differentiation and integration, differential equations, vectors and tensors, matrices, Fourier series, complex analysis, probability and statistics

D: Solid Mechanics

Equivalent force systems; free-body diagrams; equilibrium equations; analysis of determinate trusses and frames; friction; simple relative motion of particles; force as function of position, time and speed; force acting on a body in motion; laws of motion; law of conservation of energy; law of conservation of momentum.

Stresses and strains; principal stresses and strains; Mohr’s circle; generalized Hooke’s Law; thermal strain; theories of failure.

Axial, shear and bending moment diagrams; axial, shear and bending stresses; deflection (for symmetric bending); torsion in circular shafts; thin cylinders; energy methods (Castigliano’s Theorems); Euler buckling.

Free vibration of single degree of freedom systems.

E: Thermodynamics

Section 1: Basic Concepts

Continuum and macroscopic approach; thermodynamic systems (closed and open); thermodynamic properties and equilibrium; state of a system, state postulate for simple compressible substances, state diagrams, paths and processes on state diagrams; concepts of heat and work, different modes of work; zeroth law of thermodynamics; concept of temperature.

Section 2: First Law of Thermodynamics

Concept of energy and various forms of energy; internal energy, enthalpy; specific heats; first law applied to elementary processes, closed systems and control volumes, steady and unsteady flow analysis.

Section 3: Second Law of Thermodynamics

Limitations of the first law of thermodynamics, concepts of heat engines and heat pumps/refrigerators, Kelvin-Planck and Clausius statements and their equivalence; reversible and irreversible processes; Carnot cycle and Carnot principles/theorems; thermodynamic temperature scale; Clausius inequality and concept of entropy; microscopic interpretation of entropy, the principle of increase of entropy, T-s diagrams; second law analysis of control volume; availability and irreversibility; third law of thermodynamics.

Section 4: Properties of Pure Substances

Thermodynamic properties of pure substances in solid, liquid and vapor phases; P-vT behaviour of simple compressible substances, phase rule, thermodynamic property tables and charts, ideal and real gases, ideal gas equation of state and van der Waals equation of state; law of corresponding states, compressibility factor and generalized compressibility chart.

Section 5: Thermodynamic Relations

T-ds relations, Helmholtz and Gibbs functions, Gibbs relations, Maxwell relations, Joule-Thomson coefficient, coefficient of volume expansion, adiabatic and isothermal compressibilities, Clapeyron and Clapeyron-Clausius equations.

Section 6: Thermodynamic Cycles

Carnot vapor cycle, ideal Rankine cycle, Rankine reheat cycle, air-standard Otto cycle, air-standard Diesel cycle, air-standard Brayton cycle, vapor-compression refrigeration cycle.

Section 7: Ideal Gas Mixtures

Dalton’s and Amagat’s laws, properties of ideal gas mixtures, air-water vapor mixtures and simple thermodynamic processes involving them; specific and relative humidities, dew point and wet bulb temperature, adiabatic saturation temperature, psychrometric chart.

F: Polymer Science and Engineering

Section 1: Chemistry of high polymers

Monomers, functionality, degree of polymerizations, classification of polymers, glass transition, melting transition, criteria for rubberiness, polymerization methods: addition and condensation; their kinetics, metallocene polymers and other newer techniques of polymerization, copolymerization, monomer reactivity ratios and its significance, kinetics, different copolymers, random, alternating, azeotropic copolymerization, block and graft copolymers, techniques for copolymerizationbulk, solution, suspension, emulsion.

Section 2: Polymer Characterization

Solubility and swelling, concept of average molecular weight, determination of number average, weight average, viscosity average and Z-average molecular weights, polymer crystallinity, analysis of polymers using IR, XRD, thermal (DSC, DMTA, TGA), microscopic (optical and electronic) techniques.

Section 3: Synthesis and properties

Commodity and general purpose thermoplastics: PE, PP, PS, PVC, Polyesters, Acrylic, PU polymers. Engineering Plastics: Nylon, PC, PBT, PSU, PPO, ABS, Fluoropolymers Thermosetting polymers: PF, MF, UF, Epoxy, Unsaturated polyester, Alkyds. Natural and synthetic rubbers: Recovery of NR hydrocarbon from latex, SBR, Nitrile, CR, CSM, EPDM, IIR, BR, Silicone, TPE.

Section 4: Polymer blends and composites

Difference between blends and composites, their significance, choice of polymers for blending, blend miscibility-miscible and immiscible blends, thermodynamics, phase morphology, polymer alloys, polymer eutectics, plastic-plastic, rubber-plastic and rubber-rubber blends, FRP, particulate, long and short fibre reinforced composites.

Section 5: Polymer Technology

Polymer compounding-need and significance, different compounding ingredients for rubber and plastics, cross-linking and vulcanization, vulcanization kinetics.

Section 6: Polymer rheology

Flow of Newtonian and non-Newtonian fluids, different flow equations, dependence of shear modulus on temperature, molecular/segmental deformations at different zones and transitions. Measurements of rheological parameters by capillary rotating, parallel plate, cone-plate rheometer. Viscoelasticity-creep and stress relaxations, mechanical models, control of rheological characteristics through compounding, rubber curing in parallel plate viscometer, ODR and MDR.

Section 7: Polymer processing

Compression molding, transfer molding, injection molding, blow molding, reaction injection molding, extrusion, pultrusion, calendaring, rotational molding, thermoforming, rubber processing in two-roll mill, internal mixer.

Section 8: Polymer testing

Mechanical-static and dynamic tensile, flexural, compressive, abrasion, endurance, fatigue, hardness, tear, resilience, impact, toughness. Conductivity-thermal and electrical, dielectric constant, dissipation factor, power factor, electric resistance, surface resistivity, volume resistivity, swelling, ageing resistance, environmental stress cracking resistance.

G: Food Technology

Section 1: Food Chemistry and Nutrition

Carbohydrates: structure and functional properties of mono-, oligo-, & polysaccharides including starch, cellulose, pectic substances and dietary fibre, gelatinization and retrogradation of starch. Proteins: classification and structure of proteins in food, biochemical changes in post mortem and tenderization of muscles. Lipids: classification and structure of lipids, rancidity, polymerization and polymorphism. Pigments: carotenoids, chlorophylls, anthocyanins, tannins and myoglobin. Food flavours: terpenes, esters, aldehydes, ketones and quinines. Enzymes: specificity, simple and inhibition kinetics, coenzymes, enzymatic and nonenzymatic browning. Nutrition: balanced diet, essential amino acids and essential fatty acids, protein efficiency ratio, water soluble and fat soluble vitamins, role of minerals in nutrition, co-factors, anti-nutrients, nutraceuticals, nutrient deficiency diseases. Chemical and biochemical changes: changes occur in foods during different processing.

Section 2: Food Microbiology

Characteristics of microorganisms: morphology of bacteria, yeast, mold and actinomycetes, spores and vegetative cells, gram-staining. Microbial growth: growth and death kinetics, serial dilution technique. Food spoilage: spoilage microorganisms in different food products including milk, fish, meat, egg, cereals and their products. Toxins from microbes: pathogens and non-pathogens including Staphylococcus, Salmonella, Shigella, Escherichia, Bacillus, Clostridium, and Aspergillus genera. Fermented foods and beverages: curd, yoghurt, cheese, pickles, soya-sauce, sauerkraut, idli, dosa, vinegar, alcoholic beverages and sausage.

Section 3: Food Products Technology

Processing principles: thermal processing, chilling, freezing, dehydration, addition of preservatives and food additives, irradiation, fermentation, hurdle technology, intermediate moisture foods. Food packaging and storage: packaging materials, aseptic packaging, controlled and modified atmosphere storage. Cereal processing and products: milling of rice, wheat, and maize, parboiling of paddy, bread, biscuits, extruded products and ready to eat breakfast cereals. Oil processing: expelling, solvent extraction, refining and hydrogenation. Fruits and vegetables processing: extraction, clarification, concentration and packaging of fruit juice, jam, jelly, marmalade, squash, candies, tomato sauce, ketchup, and puree, potato chips, pickles. Plantation crops processing and products: tea, coffee, cocoa, spice, extraction of essential oils and oleoresins from spices. Milk and milk products processing: pasteurization and sterilization, cream, butter, ghee, icecream, cheese and milk powder. Processing of animal products: drying, canning, and freezing of fish and meat; production of egg powder. Waste utilization: pectin from fruit wastes, uses of by-products from rice milling. Food standards and quality maintenance: FPO, PFA, Agmark, ISI, HACCP, food plant sanitation and cleaning in place (CIP).

Section 4: Food Engineering

Mass and energy balance; Momentum transfer: Flow rate and pressure drop relationships for Newtonian fluids flowing through pipe, Reynolds number. Heat transfer: heat transfer by conduction, convection, radiation, heat exchangers. Mass transfer: molecular diffusion and Fick’s law, conduction and convective mass transfer, permeability through single and multilayer films. Mechanical operations: size reduction of solids, high pressure homogenization, filtration, centrifugation, settling, sieving, mixing & agitation of liquid. Thermal operations: thermal sterilization, evaporation of liquid foods, hot air drying of solids, spray and freeze-drying, freezing and crystallization. Mass transfer operations: psychrometry, humidification and dehumidification operations.

Leave a Reply

Your email address will not be published. Required fields are marked *