Steam Nozzles and Turbines Online Test – Multiple Choice Questions and Answers Posted on April 16, 2024April 16, 2024 by engineer2 Comments 1. Reheating of steam in a turbine reduces wear on the blades increases the efficiency of the turbine increases the workdone through the turbine all of these 2. The compounding of turbines is done in order to reduce exit losses reduce speed of rotor improve efficiency All of these 3. The critical pressure ratio for gases is 0.546 0.577 0.582 0.528 4. The purpose of governing in steam turbines is to reheat the steam and improve its quality maintain the speed of the turbine reduce the effective heat drop completely balance against end thrust 5. Blading efficiency is also known as diagram efficiency stage efficiency nozzle efficiency none of these 6. The density of supersaturated steam is about __________ that of the ordinary saturated vapour at the corresponding pressure 2 times 4 times same as 8 times 7. Which of the following statement is correct for steam turbines as compared to reciprocating steam engines? A steam turbine develops higher speeds The efficiency of steam turbine is higher The steam consumption is less All of these 8. The process of maintaining the speed of the turbine constant for various load conditions, is known as governing bleeding reheating none of these 9. The critical pressure ratio for initially dry saturated steam is 0.582 0.577 0.601 0.546 10. The reheat factor depends upon turbine stage efficiency exit pressure initial pressure and superheat All of these Loading … Question 1 of 10
Please provide more fundamental questions of Thermodynamics of Steam Turbines.
need more questions on steam turbine thermodynamics