Aircraft Performance Multiple Choice Questions on “Estimation of Take-off Distances”.
1. What are the additional forces acting on the aircraft?
a) Runway friction
b) Lift
c) Thrust
d) Power
Answer: a
Clarification: The additional forces that act on the aircraft are:
- Runway friction
- Wheel spin-up
- Side-wind loads.
2. Which of the following are the correct equations for take-off run?
a) FN+D-WsinγR-μrR=mV̇
b) R-L=WcosγR
c) R-L=WsinγR
d) FN-D-WsinγR-μrR=mV̇
Answer: d
Clarification: The equations derived for the take-off run are as follows:
- FN-D-WsinγR-μrR=mV̇
- R+L=WcosγR
3. Which of the following is the correct formula for accelerating force?
a) (frac{F}{W}=Big{frac{F_N}{W}+mu_R-singamma_RBig}-frac{L}{W}Big(frac{C_D}{C_L}-mu_RBig))
b) (frac{F}{W}=Big{frac{F_N}{W}-mu_R+singamma_RBig}-frac{L}{W}Big(frac{C_D}{C_L}-mu_RBig))
c) (frac{F}{W}=Big{frac{F_N}{W}-mu_R-singamma_RBig}-frac{L}{W}Big(frac{C_D}{C_L}-mu_RBig))
d) (frac{F}{W}=Big{frac{F_N}{W}-mu_R-singamma_RBig}-frac{L}{W}Big(frac{C_D}{C_L}+mu_RBig))
Answer: c
Clarification: The formula for accelerating force is given by: (frac{F}{W}=Big{frac{F_N}{W}-mu_R-singamma_RBig}-frac{L}{W}Big(frac{C_D}{C_L}-mu_RBig)) where F is force, W is weight, μR is runway coefficient of the rolling friction, γR is runway slope, L is lift, CD and CL are the coefficients of drag and lift.
4. The curly bracket in the accelerating force represents the net propulsive thrust- weight ratio.
a) True
b) False
Answer: a
Clarification: The formula for accelerating force is given by: (frac{F}{W}=Big{frac{F_N}{W}-mu_R-singamma_RBig}-frac{L}{W}Big(frac{C_D}{C_L}-mu_RBig)) where F is force, W is weight, μR is runway coefficient of the rolling friction, γR is runway slope, L is lift, CD and CL are the coefficients of drag and lift. The curly bracket in the accelerating force represents the net propulsive thrust- weight ratio.
5. The round bracket in the accelerating force represents the drag- lift ratio at the ground angle of attack.
a) True
b) False
Answer: a
Clarification: The formula for accelerating force is given by: (frac{F}{W}=Big{frac{F_N}{W}-mu_R-singamma_RBig}-frac{L}{W}Big(frac{C_D}{C_L}-mu_RBig)) where F is force, W is weight, μR is runway coefficient of the rolling friction, γR is runway slope, L is lift, CD and CL are the coefficients of drag and lift. The round bracket in the accelerating force represents the drag- lift ratio at the ground angle of attack.
6. The formula for ground run is given by the formula __________
a) SG=(frac{V_{LOF}^2}{2g(A+BV^2)_{V_{LOF}}})
b) SG=(frac{V_{LOF}^2}{2g(A+BV^2)_{0.7V_{LOF}}})
c) SG=(frac{V_{LOF}^2}{2g(A-BV^2)_{0.7V_{LOF}}})
d) SG=(frac{V_{LOF}^2}{2g(A-BV^2)_{V_{LOF}}})
Answer: c
Clarification: The formula for ground run is given by the formula SG=(frac{V_{LOF}^2}{2g(A-BV^2)_{0.7V_{LOF}}}) where
- V is velocity
- G is acceleration due to gravity
- A and B are constants.
7. The airborne distance is given by __________
a) SA=(frac{W}{(F_N-D)_{av}}Big{frac{V_{2}^2+V_{LOF}^2}{2g}+35Big})
b) SA=(frac{W}{(F_N+D)_{av}}Big{frac{V_{2}^2+V_{LOF}^2}{2g}+35Big})
c) SA=(frac{W}{(F_N+D)_{av}}Big{frac{V_{2}^2-V_{LOF}^2}{2g}+35Big})
d) SA=(frac{W}{(F_N-D)_{av}}Big{frac{V_{2}^2-V_{LOF}^2}{2g}+35Big})
Answer: d
Clarification: The airborne distance is given by SA=(frac{W}{(F_N-D)_{av}}Big{frac{V_{2}^2-V_{LOF}^2}{2g}+35Big}) where
- W is weight
- D is drag
- G is acceleration due to gravity
- V is velocity
- FN is normal force.
8. In the calculations the horizontal airborne distance is assumed to be much greater than 35 feet.
a) True
b) False
Answer: a
Clarification: In the calculations the horizontal airborne distance is assumed to be much greater than 35 feet. The airborne distance is given by SA=(frac{W}{(F_N-D)_{av}}Big{frac{V_{2}^2-V_{LOF}^2}{2g}+35Big}) where
- W is weight
- D is drag
- G is acceleration due to gravity
- V is velocity
- FN is normal force.
9. The difference between the lift-off speed and take-off safety speed must be small.
a) True
b) False
Answer: a
Clarification: The difference between the lift-off speed and take-off safety speed must be small. This is to reduce the time during which the aircraft may be unstable to meet the requirement of the directional control.
10. The energy change is given by __________
a) ΔE=(frac{T^2}{S^2})
b) ΔE=(frac{T^2}{S})
c) ΔE=(frac{T}{S})
d) ΔE=T x S
Answer: c
Clarification: The energy change is given by ΔE=excess thrust x distance moved i.e. ΔE=T x S where T is excess thrust and S is distance moved. This energy chance happens when the aircraft is undergoing an airborne phase.
11. What is the energy change in the aircraft when the thrust is 244N and the distance travelled is 1230km?
a) 198000 N-Km
b) 484000 N-Km
c) 300120 N-Km
d) 234553 N-Km
Answer: c
Clarification: The answer is 300120 N-Km. Use the formula ΔE=T x S. Given T=244 N and S=1230 km.
On substituting we get ΔE=244 x 1230.
On solving we get ΔE=300120 N-Km.