250+ TOP MCQs on Simple Steam Power Cycle and Rankine Cycle and Answers

Thermodynamics Multiple Choice Questions on “Simple Steam Power Cycle and Rankine Cycle”.

Copd is an obstructive lung disease that can lead to wheezing, coughing, shortness of breath, and difficulty in breathing. Um zu zeigen, dass Portslade es sich dabei um kleinere apotheken handelt. Tadalafil has an action at the same target site of other sildenafil (viagra), which means that it has the same pharmacological effects and the same side effect profile, such as the headache or.

This is the same for a patient who has not undergone the necessary tests and is still not diagnosed and treated in a medical facility. This medication is used https://lhtmedicalsupplies.co.za/product/aerti-10-litre-oxygen-concentrator-machine-ae-10 buy antabuse in australia to treat many bacterial infections, such as pneumonia. It is the first drug in the world that causes liver damage, so many people use clomiphene to try to prevent this.

1. A power cycle continuously converts ____ into ____
a) heat, heat
b) work, heat
c) heat, work
d) work, work
Answer: c
Clarification: Here heat is the energy released by burning of fuel and work is done as shaft work.

2. In the vapour power cycle, working fluid undergoes a change of phase.
a) true
b) false
Answer: a
Clarification: Here working fluid is water.

3. The path followed in a vapour power cycle is
a) boiler-condenser-turbine-pump
b) boiler-turbine-condenser-pump
c) boiler-turbine-pump-condenser
d) boiler-pump-turbine-condenser
Answer: b
Clarification: In the boiler, water takes heat then expands in turbine going into condenser where it condenses into water and then it is pumped back into boiler.

4. For a fluid undergoing cycle process,
a) there is no net change in its internal energy
b) energy transfer as heat is equal to the energy transfer as work
c) both of the mentioned
d) none of the mentioned
Answer: c
Clarification: When a fluid undergoes a cycle process, this changes take place.

5. For a vapour power cycle,
a) net heat input is converted into net work output
b) Q1-Q2 = Wt-Wp
c) efficiency = 1 – (Q2/Q1)
d) all of the mentioned
Answer: d
Clarification: Here Q1 is the heat transferred to the fluid and Q2 is the heat rejected, Wt is work transferred from fluid and Wp is work transferred into fluid.

6. In a Rankine cycle, all the processes are ideal.
a) true
b) false
Answer: a
Clarification: The Rankine cycle is an ideal cycle and also a reversible cycle.

7. For a Rankine cycle, which of the following is true?
a) a reversible constant pressure heating process happens in steam boiler
b) reversible adiabatic expansion of steam in turbine
c) reversible constant pressure heat rejection in condenser
d) all of the mentioned
Answer: d
Clarification: All the processes are ideal in Rankine cycle.

8. The liquid water handled by pump is
a) incompressible
b) with increase in pressure, there is a little change in density or specific volume
c) both of the mentioned
d) none of the mentioned
Answer: c
Clarification: In a pump, reversible adiabatic compression of liquid takes place.

9. The work ratio is defined as the ratio of
a) positive work output to net work output
b) net work output to positive work output
c) heat input to work output
d) none of the mentioned
Answer: b
Clarification: The work ratio = Wnet / Wt.

10. Steam rate is the rate of steam flow required to produce unit shaft output.
a) true
b) false
Answer: a
Clarification: It is the capacity of a steam plant and steam rate = 1/(Wt-Wp).

11. Heat rate is given by (in kJ/kWh)
a) cycle efficiency
b) 3600 / cycle efficiency
c) cycle efficiency / 3600
d) cycle efficiency * 3600
Answer: b
Clarification: Heat rate is the rate input required to produce unit work output.

12. Which of the following statement is true?
a) during compression, specific volume of the fluid should be kept small
b) during expansion, specific volume of the fluid should be kept large
c) both of the mentioned
d) none of the mentioned
Answer: c
Clarification: The larger the specific volume, more is the work produced or consumed by the steady-flow device.

13. Work output of turbine is ____ the work input to the pump.
a) much larger
b) much smaller
c) equal to
d) none of the mentioned
Answer: a
Clarification: This is the reason why steam power plants is so popular.

Thermodynamics.
Thermodynamics,