Soils are a complex combination of organic matter, gasses, minerals, organisms, and liquids, that altogether support our life. Earth’s body of soil is called the pedosphere, which has four important functions. It is a medium for plant growth, it stores water, supplies, and purifies, it is a modifier of the earth’s atmosphere, it is a habitat for organisms. Soil is one of the principal substrata of life on earth, which is a participant in the cycling of carbon and other elements through the global ecosystem. To study the texture of soil samples and a few more go through the experiment below.
Soils are a complex combination of various organic matter, gasses, minerals, organisms, and liquids, all of which support our life. The Earth’s body of soil is known as the pedosphere, which has four important functions:
Soil is used for the growth of plants. Soil helps to store water. Soil is said to be the modifier of the earth’s atmosphere and also is a habitat for organisms.
To study soil samples from two different sites and in order to analyze their properties like the texture, moisture content, water-retaining capacity, and pH of the soil, the soil collected from the roadside is to be used. Apart from the soil samples, the following materials and apparatus are also needed:
-
Tile.
-
Beaker.
-
Funnel.
-
Burner.
-
Dropper.
-
Crucibles.
-
Petri dish.
-
Glass rods.
-
Test tubes.
-
Wire gauze.
-
Filter Paper.
-
Distilled water.
-
Mortar and Pestle.
-
pH paper booklet.
-
Measuring cylinder.
-
Universal pH indicator solution.
-
Tin Box with a perforated bottom.
-
Weighing scale or Electronic balance.
An Experiment to Study the Texture of Soil Samples
Aim:
To study the texture of soil samples,
To study the moisture content of the soil samples,
To study the capacity of holding water of soil samples,
To study the pH of the soil samples.
Apparatus Required:
Roadside and garden soil to be used. Other materials apart from the samples are:
-
Dropper
-
Beaker
-
Tile
-
Measuring cylinder
-
Filter paper
-
pH paper booklet
-
Test tubes
-
Distilled water
-
Funnel
-
Universal pH indicator solution
-
Wire gauze
-
Burner
-
Crucibles
-
Weighing scale
-
Mortar and pestle
-
Petri dish
-
Glass rods
-
Tin box with perforated bottom
Procedure:
The steps to analyze various properties:
To Study the Texture of Soil Samples,
-
Collect 50 gm of soil in a cylinder.
-
Pour a little water into the cylinder and shake.
-
Wait for the particles to settle down.
-
The particles in the measuring cylinder will start settling down in layers. Record the thickness of these layers.
To Study the Moisture Content of the Soil Samples,
-
Put the two samples of soil in different crucibles.
-
Weight the samples using a weighing balance.
-
Place the crucibles over the Bunsen burner and heat it until it becomes dry.
-
Weight the crucibles and record the weight of the dry soil samples.
-
The samples are now ready to be used to determine the moisture content of the soil.
To Study the Holding Capacity of Water of Soil Samples,
-
Take a soil sample in a mortar.
-
Grind it into a fine powder.
-
Place a filter paper at the bottom of the box.
-
Weigh the entire contents of the tin box and add the powdered soil into the box.< /span>
-
Use the glass rod to press and tap the box so that the soil is uniformly layered.
-
Measure and record the weight of the tin box.
-
Take two glass rods placing them parallel to each other. Ensure that the distance between the two is not significant.
-
Position the tin on the two glass rods such that the bottom is in contact with the water.
-
This setup should be left undisturbed until the water seeps through the upper surface of the soil.
-
Remove the tin and allow all the water to flow out from the bottom.
-
Wait until no more water percolates from the tin. Then, wipe the bottom dry and note down the weight using the weighing machine.
To Study the pH of the Soil Samples,
-
Take the roadside soil and put it into a beaker containing water. Repeat the steps for the garden soil sample as well.
-
Take a test tube and pour the soil solutions separately through filter papers using a funnel.
-
The collected filtrates in the test tube are ready for pH testing.
-
Put a few drops of universal indicator solution using a dropper in the test tube.
-
Finally, observe the changes.
Observation:
-
To Study the Moisture Content of the Soil Samples: The sample where the initial and final weight is the larger indicated higher moisture content and if lower indicates the lower moisture.
-
To Study the pH of the Soil Samples: The color changes are trackable using the pH color chart. Roadside soil has a pH level of 7 while garden soil has a pH level of 6. Maximum crops grow between pH levels of 6.0 and 7.0.
Solved Examples
Question: What are the layers of soil?
Answer: The layers of soil are topsoil, subsoil, and parent rock.
Fun Facts
-
It contains more organisms in one tablespoon of soil than there are people on earth.
-
Even to form an inch of topsoil it may take nearly 500 years.
-
0.01 percent of the water on earth is held in the soil.
-
Soil lies at the bottom of the food chain. Still, it is the cornerstone of life on the earth.