[Geography Notes] on Structural Geology Pdf for Exam

It is a field of study under geology that can trace back the rocks and mountains’ origins. Structural geologists can identify the deformational histories and use the measurements to uncover information about past events. The stress fields that result in the shapes of the rocks are of interest to the geologist. Understanding the stress fields can help link important events in the past to the evolutionary process of a particular region. Structural geology helps to identify widespread rock patterns and deformations on surfaces such as mountains, rifts, etc., that is a result of plate tectonics. 

      

Importance of Structural Geology

It is a subfield of geology where a geologist examines natural geological phenomena. The stress put on the rocks as it was formed of particular interest. The deformations can reveal the angles and origins of stress and makes it possible to determine the intensity of the pressure. Specialists in structural geology can draw up many conclusions by studying how rocks look, how things from, and how they can be used. 

In the economic sense, structural geology is critical in understanding the processes of formation. It can enable us to analyze the patterns and identify the geological features that hold pockets of valuable minerals and other resources such as petroleum. 

Role of Structural Geologist

Structural geologists are called after an accident due to a geologic event to examine why it occurred so that it can be prevented in the future to save the community from damage and loss of life. Structural geologists can assess the geological risks of sinkholes, volcanoes, etc., which concern society and developers.

Fundamentals of Structural Geology

Structural geology is related to the history of the earth as well. Hence, structural geology and tectonics are interlinked. The study of plate tectonics is a part of structural geology where deformations in existing rocks can help identify the earth’s crust movements. 

Structural geologists can draw the connections between similar geologic formations and explore the condition in the various geological ages. They learn about the features formed and the ongoing processes that shape the earth, such as the process of mountain formation. 

It can take place in the field with geologists. They can make site visits to examine the formation that is of economic interest or otherwise. They can carry it back to the lab for examination. These people are experts and can use various types of equipment in the work that includes computers for complex calculations and spectrometers to determine a particular field’s mineral content; aerial photography to get a broad picture of the area. 

Since the scale of geology is vast, the ability to look into the enormous picture is critical to thoroughly understand the geological processes that work in a given area of the world. 

Applied Subsurface Geological Mapping 

To locate the sources of petroleum, subsurface geological maps are vital. People widely use these documents to explore and excavate minerals. Geologists and engineers can understand and efficiently generate many types of subsurface maps. During the exploration process and for the developmental process, it is crucial to understand the 4D development of reservoirs. 

Subsurface maps are fundamental for oil, gas and developmental explorations. It can be seismic based or otherwise. People with experience can make monumental discoveries with the help of such maps. Experts need to examine the constructions of rock surfaces and interpret the fault plane, structure contour, thickness, etc. they can understand the integrated mapping and cross-sections to form data presentations. 

Proficient explorers and development geoscientists in the industry use these mapping techniques to get advanced interpretations. There are many mapping techniques, examples and compressional tectonic settings that play a vital role in subsurface geological mapping. 

[Geography Notes] on The Hot Desert – Sahara Pdf for Exam

The Sahara Desert is the desert found on the African continent. Of its types, it is the largest and one of the hottest desert in the world with an area of 9.2 mil sq. km.

According to the area, it only falls third after the deserts of Antarctica and the Arctic. It comprises most of the North African region of the African continent apart from the region on the Mediterranean Sea coast, the Atlas Mountains of the Maghreb and the Nile valley covering Egypt and Sudan.

The Sahara desert is surrounded by the Red Sea in the east, the Mediterranean Sea in the north, the Atlantic Ocean in the west and the semi-arid tropical savanna belt of the Sahel in the south. The hot desert Sahara is divided by several geographical landscapes of Western Sahara, the central Ahaggar Mountains, the Tibesti Mountains, the Air mountains, the Aïr Mountains, the Ténéré desert, and the Libyan desert.

Life in Sahara Desert

Life in Sahara desert is mainly controlled by the desert climate the most, as it influences heavily the hot desert climate vegetation and the animal life of Sahara desert. Various features of the desert climate such as the tempurature, precipitation, etc. contribute to daily life in Sahara desert. The climate is because of the location in horse latitudes under the subtropical ridge. This low-latitude desert climate comes under a significant belt of the semi-permanent subtropical warm-core high-pressure region where the air descends from the upper troposphere and warms and dries up the lower troposphere which prevents the monsoonal cloud formation.

As is clear, there are very less to nonexistent cloud formations, therefore the sky is mostly clear over the hot desert. The sunshine duration over the Sahara desert is very high with some places reaching 91% of the daylight hours i.e. 4000 hours of bright sunshine per year. The amount of daylight solar irradiation is 2800 kWh/(m2 year). This is proof of the indication of the high solar power potential of the Great Sahara Desert. The absence of all the clouds almost to nill existence allows uninterrupted and unhindered sunlight and thermal radiation and affects the hot desert climate vegetation and animal life of Sahara desert.

The average rainfall of the Sahara desert is varying but is also very low. The hot desert Sahara receives some rainfall in the northern and southern edges of the desert. It is non-existent above the central and the eastern areas of the hot desert. The average rainfall is around 100 millimetres to 250 millimetres over the entire desert area. Less rain and huge amounts of sunlight lead to the sand temperatures reaching above 80°C at some places which are more than the sand temperatures of the hottest desert in the world – the Lut Desert where the temperature is around 70°C. All of these factors contribute to the dry and hot desert climate and the life in the Sahara.

()

Desertification and History of the Hot Desert Sahara

It has been theorized that the Sahara desert has alternated between the desert and the savanna grassland in a 20,000-year cycle. It is because of the precession of the Earth’s axis while rotating around the Sun changing the location of the North African Monsoon. Currently, the hot desert Sahara is undergoing a dry period. One of the interesting Sahara desert facts is that it is next going to be a grassland after 15,000 years. The monsoon weekend in Northern Africa because of the glaciation in the last Quaternary period about two to three million years ago. It is also theorized that the monsoon weakened because of the drying of the ancient Tethys Sea during the Totonian period about seven million years ago.

Since the end of the last glacial period, the people have been living on the edges of the hot desert. It used to be a much wetter place before than it is today. Many of the fossils of the dinosaurs have been found such as the Afrovenator, and Jobaria. Apart from this, the existence of many crocodile species along with other animals has been found through a large number of petroglyphs. But the abrupt desertification occurred because of the shift in Earth’s axis leading to the increased temperatures and decreased precipitation. The modern Sahara desert is only green around the areas of the Nile valley, a few oases, and the northern highlands where the Mediterranean plants such as the olive trees are known to grow.

Sahara Desert Information on Culture, People, and Languages

The cultural aspects are varied because of the people from distinct origins. Various cultures from prehistoric times such as the Kiffians, Tenerians, Nubians, etc. have existed in the hot desert Sahara over a period of thousands of years. Other ethnic groups include the Amazigh, Toubou, Zaghawa, Kanuri, Hausa, Songhai, etc. Among them, there are the Znaga tribes which are remnants of the prehistoric Zenaga language-speaking tribes.

The widely spoken languages include the dialects of the Arabic language. These groups of languages such as Arabic and the Berber are included in the bigger group known as Amazigh. Other languages include the Beja languages as well which form a part of the Afro-Asiatic or Homito-Semitic family. There are also the countries with the legacies of the French, British and German colonial empires but the most prominent of them was the French colonial empire in the hot desert Sahara. The Sahara desert was also a prominent battlefield during World War 2.

[Geography Notes] on Trophic Level Pdf for Exam

The organisms of a food chain are grouped into levels on the basis of their feeding behaviors.  The producers, or green plants, are found on the first and lowest rank. The second-level animals, herbivores, or plant eaters, consume the plants or their products. Primary carnivores, or meat-eaters, eat herbivores at the third stage, and secondary carnivores eat primary carnivores at the fourth level. So, Trophic level meaning is nothing but a step in the nutritive series, or food chain, in an ecosystem. Many species eat on several trophic levels, so these groups are not strictly defined; for example, some carnivores often consume plant materials or carrion and are classified as omnivores, and some herbivores sometimes consume animal matter. The decomposers or transformers, a different trophic stage, are organisms like bacteria and fungi that break down dead organisms and waste materials into nutrients that the producers can use.

How to Define Trophic Level?

A simple trophic level definition is a group of species in an ecosystem that share the same food chain level. We have five major trophic levels in a food chain, each one of which varies in its nutritional connection with primary energy sources. So, trophic levels are formed by Producers, consumers, and decomposers in a food chain. In a given food chain, plants are producers. Animals that eat plants are primary consumers, and animals that eat primary consumers are secondary consumers.

The Utility of Trophic Levels

The trophic level definition has proven to be extremely resilient. Over the past six decades, it has been one of the most fundamental ecological concepts, and it is one of the few ecological concepts that most educated people understand. The definition is both basic and useful, which is why it occupies such a prominent position in the scheme of things. It is also universal since it extends to all ecosystems. Because of this universality, we can compare the roles of vastly different organisms in vastly different systems using trophic levels. For example, we can talk about and understand a lake and its surroundings using the same language: the forest has vegetation and leaf litter, while the lake has phytoplankton and dissolved organic matter (basal species). Herbivorous insects, birds, and mammals can be found in the trees, while zoo-plankton can be found in the lake (herbivores). And so forth. We may equate these two ecosystems to every other ecosystem on the planet using the same words. By adopting a bioenergetic perspective, this categorical and conceptual position can be made more quantitative and informative, revealing important similarities and differences among systems. Herbivores gain energy by eating basal animals, carnivores gain energy by eating herbivores, and so on. At a certain pace, each organism, or group of organisms, such as the trophic stage, produces energy. This is the maximum rate at which energy could theoretically be consumed by the next trophic stage up the food chain.

A Trophic Level’s Ecological Transfer Efficiency

The ratio of (energy ingested from that trophic level by the next highest trophic level) to (energy ingested from that trophic level by the next highest trophic level) is the ecological transfer efficiency of a trophic level (energy ingested by that trophic level). It’s the sum of the three efficiencies discussed in the previous paragraph. Ecological transfer efficiency can vary from as low as 0.001 (depending on detritus losses) to as high as 0.5.

Trophic Position

Trophic levels refer to a feeding pattern in which A eats nothing but B, B eats nothing but C, and so on. There are n integral trophic levels if there are n compartments in the chain, and trophic level is the number of steps from the Sun + 1. As a result, trophic levels are 1 and 2 for producers and consumers in a chain, respectively. This view is broken by omnivory and the subsequent web interactions unless nonintegral TPs are permitted. Simply put, a compartment’s TP is equal to the (energy) weighted average of each of its inputs’ TPs plus 1.

Note: Since trophic interactions are often expressed in energy flows, only energy flows, not nutrients or other flows, must be used here. (A dual approach, which results in an infinite sequence of integral trophic stages, is not covered here.)

Trophic-level Models

Trophic-level models make use of the food web’s trophic levels. Some trophic stages may be combined, while others may be omitted. If higher trophic levels aren’t considered, the impact on lower levels is reflected in higher death rates at lower levels.

Each ecological lake model must include phytoplankton or periphyton, which is responsible for the primary production of biomass from inorganic nutrients. Phytoplankton is made up of hundreds of different organisms with widely disparate characteristics such as maximum growth rate, edibility, and light, nutrient, and temperature sensitivity. All of these different organisms are modeled by a single state variable in trophic-level models. It’s incredible that this will work. However, since nutrients limit primary production in many lakes, production is less reliant on the formulation and quantification of process kinetics. In such cases, the output is determined by nutrient input. This may be the reason why such simple models perform so well.

When zooplankton is specifically considered, it is often modeled as a single state variable or as two state variables representing herbivorous and carnivorous zooplankton, or as omnivorous zooplankton. These groups, once again, have a wide range of organisms.

Fish aren’t deliberately modeled in most ecological lake models. The fish predation pressure is then measured by increasing the zooplankton death rate. A seasonal dependency of such a death rate contribution may be assumed to account for changes in predation strain.

Note: Phytoplanktons are the primary producers in the lake ecosystem, while zooplanktons are the primary consumers. Higher trophic levels are occupied by benthic organisms and fishes. So, the second trophic level in a lake is Zooplanktons because they feed on primary producers. 

Food Chains and Trophic Level Transfers

Trophic Levels

The more in-depth a study of food webs is done, the more complicated the relationships become. Diagrams of species relations become tangled tangles, requiring the structure to be conceptualized. The trophic level is the most fundamental abstraction of the food chain or food web. Energy is said to have moved to a higher trophic level after each energy exchange between species.

Trophic Level Pyramid 

A Trophic Level Pyramid is a graphical representation of the flow of energy in an ecosystem at each trophic level. (This is also called an Energy pyramid or a trophic pyramid)

Each bar’s width reflects the units of energy available within each trophic stage, while the height remains constant. The flow of energy flows from the bottom up through the layers of the energy pyramid, steadily decreasing as energy is used up by the organisms at each level.

The base of the energy pyramid reflects the first trophic level in which the energy is available within primary producers. Primary producers, also known as autotrophs, are species that generate their own food using energy from nonliving sources. While there are exceptions, such as deep-sea species that use chemical energy from hydrothermal vents, most of these are photosynthesizing plants that use energy from the sun to produce their own fuel in the form of simple sugars. We’ll concentrate on ecosystems that get their energy from the sun in this section.

Heterotrophs – species that get their nutrients from organic carbon, typically in the form of other plants and animals – make up the rest of the energy pyramid.

The second trophic level consists of primary consumers. These herbivores feed solely on primary producers. The third trophic level in the food chain including the fourth is made up of secondary consumers and tertiary consumers. These are carnivores and omnivores that eat animals from all trophic levels, but mostly from the trophic level immediately beneath them. Apex predators live at the top of the energy pyramid. The majority of these species are carnivorous and have no natural predators.

Because of the way energy is used up and lost in the system, the pyramid shape is used to reflect the flow of energy.

The sun provides energy to the primary producers. However, only about 1% of the overall usable sun energy is consumed by plants (it can pass through or bounce off the plants); this is known as GPP or Gross Primary Productivity. Fortunately, the sun emits such a large amount of energy that 1 percent is enough to sustain plants; in areas with high energy input from the sun, such as tropical biomes, the GPP is higher than in areas with low energy input from the sun.

Photosynthesis is the process by which plants transform solar energy into chemical energy, which is then stored as organic compounds like sugars. Cell respiration is then used by the plants to transform the sugars into the accessible energy molecule ATP (adenosine triphosphate). Cell respiration is a metabolic reaction that consumes around 60% of a plant’s energy, leaving about 40% of the GPP as NPP (Net Primary Productivity). This NPP value reflects the entire amount of energy units made available to the plants.

All life processes, such as respiration, movement, metabolic processes, and reproduction, consume energy. As a result of that, only about 10% of total energy available to plants will be converted into plant tissues, while the rest 90% is taken up and lost as heat.

At each trophic stage, the same amount of energy (90%) is lost as heat, while 10% is converted into usable biomatter. The apex predators can only earn 0.01 percent of the primary energy by the time it hits the top trophic stage! Food chains are usually restricted to six levels because there is too little energy available at the highest trophic stage.

Throughout the entire energy pyramid, decomposers and detritivores break down the tissues and other organic matter which has not been consumed by animals higher in the food chain. By doing so, these organisms will recycle the nutrients back to the soil, playing an important role in the carbon and nitrogen cycles.

Biomass and Energy Transfer

Decomposers and detritivores break down tissues and other organic matter that has not been eaten by animals higher up the food chain in the entire energy pyramid. These species then recycle the nutrients back into the soil, contributing significantly to the carbon and nitrogen cycles.

Marine Life

Trophic levels are determined by a species’ diet. Stable isotope analyses, trophic ecosystem models, and stomach material analysis can all be used to obtain it. A fish with a trophic level of 3.5, for example, will consume 50% herbivorous zooplankton (trophic level 2) and 50% zooplankton-eating fish (trophic level 3). Flow charts depicting the flow of energy between organisms in an ecosystem may represent trophic interactions between marine mammals and other species. Large flatfish, deepwater fish, other demersal fishes, marine mammals, and birds are all major level, 4 consumers. As a result, big flatfish and other fish species share the top spot as top predators in marine habitats with marine mammals. These fish are also fierce rivals to marine mammals.

Usual Mistakes and Misconceptions in Trophic Level Definition Biology

  • Depending on the food web, an individual can not always occupy the same trophic stage. It’s not always easy to categorize species into trophic levels. Humans, for example, are omnivores, which means they can consume both plants and animals. As a result, they may be classified as principal, secondary, or even higher! customers.

  • In a food web, the arrows fly from the victim to the predator rather than the other way around. The arrows in a food web or food chain point in the direction that energy is moving, which might seem counterintuitive.

[Geography Notes] on Van Allen Radiation Belt Pdf for Exam

The Van Allen radiation belt is an area in the Earth’s magnetosphere that contains doughnut-shaped zones of highly charged particles. The magnetosphere is a level in the Earth’s atmosphere that is placed at high altitudes, and which interacts with solar winds that cause distortions in the shape of the belts. In 1958, an American physicist by the name of James A. Van Allen discovered the radiation belts using data sent by the US Explore satellite. The naming of these radiation belts is done in honor of the physicist who discovered them. In this article, we will discuss the Van Allen belt and learn more about this phenomenon. 

Understanding the Location of the Van Allen Belts 

The Van Allen radiation belt is placed in such a way that it is most densely present over the Equator and absent near the poles. The shape of the belt is such that it appears to be divided into two zones: an inner belt and an outer belt. In reality, there is no actual gap between the zones and they in fact merge with each other. 

The inner and outer belts appear so due to the changing flux of the charged particles which look like two regions of maximum density. The inner region lies about three thousand kilometers above the Earth’s surface. The outer region of the Van Allen belt is found at an altitude of fifteen thousand to twenty thousand kilometers, however, according to some estimates, it is placed as far away as six Earth radii (which is about thirty-eight thousand kilometers). 

The Inner Van Allen Belt

The inner Van Allen belt is an area of densely packed protons in high-energy states. The energy of the charged particles in this region exceeds 30,000,000 electron volts. The protons travel in this area of the belt with high intensity, peaking at approximately 20,000 particles per second crossing a spherical region of one square centimeter. The origin of the charged particles in this inner region of the Van Allen belt is an interesting concept. Scientists explain that in the magnetosphere, the atoms in the Earth’s atmosphere collide with high-intensity cosmic rays from out of the solar system which causes neutrons to decay. These decaying neutrons are responsible for the release of high-energy protons which are abundant in the inner belt. 

Some neutrons in the belt are ejected away from the atmosphere, while some of them undergo decay. These independently charged particles travel in spirals along the lines of Earth’s magnetic field. As the particles reach near the polar caps, the strength of the magnetic fields deflects the charged particles off their course. This phenomenon causes the particles to travel back and forth between the poles, forming a sort of magnetic mirror. These particles finally move out of the belt when they collide with atoms in the atmosphere. 

The Outer Van Allen Belt 

The composition of the outer Van Allen belt largely consists of highly charged particles originating from the Earth’s atmosphere and also from heavy streams of charged particles (mainly helium) flowing from the sun, which are known as solar winds. The particles in this region have comparatively lower energies as opposed to the inner belt. However, they experience a much greater flux. The electrons in this region are the most energetically abundant, with values reaching up to several hundred million electron volts. 

A lot of cosmic activity, often caused by the sun, such as coronal mass ejection can negatively affect the outer Van Allen radiation belt. These forces can cause the belt to deplete, resulting in a third feeble belt between the outer and inner regions. Interaction between solar forces and the belts is also responsible for atmospheric phenomena such as auroras and magnetic storms. 

Solved Examples 

1. Briefly State the Cause Behind the Formation of a Van Allen Radiation Belt. 

Answer: The Van Allen belt is a region of energetically charged particles that are brought along by cosmic rays and solar winds and get attracted to the Earth’s magnetic field. 

2. How Many Satellites are Present in the Region of the Van Allen Belt?

Answer: Since this region of the Earth’s atmosphere is dense in charged particles, we use this region to support our communication and navigation systems. There are approximately 800 satellites present in the region of the belt. 

[Geography Notes] on What is an Alloy? – Definition and Examples Pdf for Exam

What is an alloy? It is a metal mixture or metal mixed with one or more of these components, is the alloy definition. Integrating the metals copper and gold, for instance, yields red gold, silver mixed with copper yields sterling silver, and gold and silver yields white gold. Steel and silicon steel are alloys made by combining iron with nonmetallic carbon or silicon. The mixing process has characteristics that are often different from that of pure metals, including improved intensity or hardness.

Unlike most other materials containing metallic components but do not act like metals, including beryllium aluminium silicate (emerald), aluminium oxide (sapphire), sodium chloride (salt), any alloy may maintain most of the metal properties in the resultant product, including ductility, electrical conductivity, lustre, and opacity.

Steel alloys have been used in anything from structures to vehicles to surgical instruments, while exotic titanium and its alloys are being used in the aerospace industry and beryllium-copper alloys are often used in non-sparking tools. In certain cases, combining metals will lower the material’s total cost while retaining essential properties. Since we have understood the alloy meaning let us look at some examples.

Examples of Alloy

According to alloy meaning, it is a mixture of a metal with at least one other metal or nonmetal. In order to be called an alloy, the combination must be part of a solid solution, a compound, or a mixture of another metal or nonmetal. In several other situations, the composition of metals gives the respective metal components synergistic qualities, including mechanical properties or corrosion resistance. Steel, brass, solder, duralumin, pewter, bronze, and amalgams are some of the examples of alloy.

Babbitt Metal: 

Babbitt metal, commonly recognized as bearing metal, is also an alloy utilized mainly as a bearing surface in plain bearings. Isaac Babbitt, an American inventor, produced this alloy during the year 1839.

The following is a standard Babbitt metal composition: 

  • Antimony (Sb) is 7% of the total.

  • Copper (Cu) accounts for 3% of the total.

  • Tin (Sn) is 90% of the total.

One of the most appealing characteristics of this alloy is its low friction with steel.

Steel: 

Steel is a very common alloy because of its low price and greater tensile strength. It is essentially an iron and carbon alloy. Various forms of steel, on the second hand, are believed to carry variable quantities of carbon, as well as many other elements (including manganese, chromium, phosphorus, sulfur, copper, nickel, and molybdenum). Stainless steel, for example, is made up of the following elements:

  • Iron content is between 85 and 88 % (Fe)

  • Less than 1.2 % carbon (C)

  • Less than 1.2% carbon (C)

  • Tiny amounts of several other elements

Nichrome:

Nichrome is an alloy made mainly of chromium and nickel, as the name implies. It’s not unusual for nichrome alloys to produce iron and other elements as well. The following is a typical nichrome alloy composition:

  • Nickel (Ni) is 80-85% pure.

  • Chromium (Cr) in the range of 15-20%

  • Other components, such as iron

Bronze:

Bronze is a copper and tin alloy. Coins, medals, heavy gears, trophies, and equipment, and certain types of electrical hardware all use it. Bronze is made up of the following elements:

  • Copper (Cu) accounts for 75% of the total.

  • Tin (Sn) – contains up to 12% tin.

  • Manganese, zinc, aluminium, nickel, phosphorus, silicon, and arsenic are examples of several other elements.

Properties of Alloy

Below mentioned are some of the Properties of Alloy:

  • Different alloys include distinct properties such as malleability, tensile strength, and visual appeal. Bronze is an effective alloy made of copper and tin that is stronger than copper. 

  • For thousands of years, this consistency has been used to mark the culture and history of mankind known as the bronze age. 

  • Alloys are used in every other company that produces metals in our everyday lives. We have tens of millions of alloy items and almost all recognized elements are involved in the production of alloys. 

  • Alloys are appealing because of their superior quality as compared with pure elemental metals.

Uses of Alloy

The uses of Alloy have been mentioned below:

  • A standard metal is hard and lustrous, as well as tough and heavy. It is excellent at generating or carrying electricity and heat. Metals are frequently combined or blended with several other metals or substances to produce alloys, which have thousands of applications in everyday life.

  • Gold is the second most commonly utilized or more universally found metal, as it is owned by most. Pure gold ornaments are seldom worn by the general public because they are too light, but the use of copper or doping of copper makes it more wearable. Doped gold is more durable than pure gold and does not bend as quickly.

  • Mostly every precision instrumentation machine or system contains at least one metal, and since iron has been the most commonly used form, we can see steel being used by adding a small amount of non-metal carbon. Steel is widely used, and the day starts with steel-made utensils. Aluminium and its alloys are the next most popular kitchen vessel.

  • Brass, which is an alloy of copper and zinc, is used for security doors and doorknobs.

  • Increased jet or laundry tub blades, as well as microwave and water heater heating elements, are all doped forms of pure metals.

  • Aluminium saucepans seldom survive long, however, if doped with a small amount of copper, magnesium, or silicon, they become durable enough to withstand extreme temps and therefore do not deform.

  • The key aluminium in an aircraft body is doped with magnesium, copper, and manganese, making it corrosion-free, durable, and lightweight, and it is commonly used throughout the aviation industry.

[Geography Notes] on Agate Pdf for Exam

Natural agate is a glassy, colourless, variety of microcrystalline quartz. The agate gemstone is used as a semiprecious stone when it is of appealing colour and quality. Agate is a diversification of chalcedony, a cryptocrystalline type of quartz. Translucency, patterns of colour, or moss-like inclusions may differentiate this stone from other types of chalcedony. Agates can display a huge variety of vivid, multiple colours. These are primarily an outcome of traces of oxides of iron, chromium, titanium, manganese, nickel, and other elements.

Formation of Agate

Agate evolves in a huge range of colours, which include white, red, pink, grey, brown, black, and yellow. The colours are brought about by impurities and take place as alternating bands within the agate. The different colours were induced as ground waters of various compositions discharged into the cavity. The banding within a cavity is a record of change in the chemistry of water. This banding provides different agates with the interesting patterns and colours which makes it a popular gemstone.

Agates are usually formed by the accumulation of silica from groundwater in the cavities of igneous rocks. The agate accumulates in concentric layers around the walls of the cavity, or in horizontal layers structuring from the bottom of the cavity. These structures create the banded patterns which are characteristic of many agates. Some of these cavities are fringed with crystals and those are called geodes.

Different Varieties of Agate

The colour patterns in agates generally acquire the form of flat or concentric layers or bands. Mossy or dendritic inclusions can occasionally imitate similarity to landscapes and vegetation. Varieties of this gemstone are primarily described by their colour patterns, source and/or inclusions. Let’s check out the various types of agate:

  1. Banded

With regular colour layers and bright colours, this variety is the most prominent. These stones can be found all around the world, however, Brazil is one of the most productive and proficient sources. Many of the affluently coloured, banded agates you spot for sale are dyed.

  1. Moss, Plume, and Dendritic

These stones consist of mossy inclusions of mineral oxides which may be any colour. Stones that reflect plant-like patterns are known as moss agates. Those with tree-like, branch patterns are known as dendritic agates. Those with feather-like patterns are known as plume agates.

  1. Lace

Known for their delicate design, these stones are banded with complex loops and swirls. Mexico is one of the premier sources of lace type of agate.

  1. Picture or Scenic

Some inclusions can create the impression of whole landscapes, complete with lakes, trees, shrubs, and shorelines within an agate. Stones that depict these “natural beauties” are highly treasured.

  1. Fire

Inclusions of plate-like crystals of limonite make fire agates scintillating and shimmery. Cutting and polishing can further amplify this effect.

  1. Iris

These stones display iridescent colours casting back from between the colour layers.

  1. Shell

Embedded, silicified shells develop patterns in these agates. Turritella agate is made up mainly of shells and shell fragments of the gastropod turritella and several other species.

  1. Petrified Wood

Fossilized primitive tree trunks and limbs may contain their organic compositions replaced by agate stone over millions of years. In a few instances, their woody structure may also be conserved and observed with a microscope. The agate’s colour may be very deep, sharp and bright.

Agate Enhancements

How are agates enhanced? Dyeing is an ancient and most prevalent practice for enhancing agates. (Chalcedony stones are comparatively porous). This is generally a stable procedure. A commemorated secret procedure for dyeing agates was developed in Idar-Oberstein, Germany, in the 19th century. When the agate accumulations in this town were consumed to exhaustion, migrants to South America shipped grey agates back to Idar-Oberstein. These pieces were dyed and the outcome was remarkable. However, dyeing enhancements must be revealed to consumers.

Refer to the table below to find out the sources of agates.

Sources of Agates

Agate Type

Source

Banded

Mexico, Brazil, USA, Uruguay, Madagascar

Moss

India, United States Northwest, Scotland

Lace

Arizona, Mexico, Namibia.

Fire

Mexico

Scenic

Montana, Wyoming, Yellowstone National Park

Petrified Wood

Arizona, California, New Mexico, Oregon, Washington various European countries; and many other localities

Agate Stone Sizes

Agates are generally nodular, but masses can be some pounds and many inches in diameter.

Indian Agate  

Quite popular, the stone of immortality, Indian Agate, draws attention to the idea of growing old with ever spiraling inner beauty, intellect, and respect for all that is and has been. Scientifically, the Indian origin agate is known to aid in getting relieved of old emotions and attracting a positive outlook on life. The red in Indian Agate promotes innovation, influential and willpower.

Eye Agate                      

Agate Eyes are commonly found in Agate nodules, which are generally developed when silica precipitates in the rock cavity. These cavities are akin to lava flows, fractures in the rock layers, or fossils that have solvated over time. Agate Eyes shows one or more concentric markings which are called to be eyes.