300+[LATEST] Oracle Goldengate Interview Questions and Answers

Q1. How To Configure Credential Store In Ogg 12c?

Steps to configure Oracle Credential Store are as follows:

  • By Default Credential Store is is located under “dircrd” directory.

If you want to specify a different location use can specidy “CREDENTIALSTORELOCATION” parameter in GLOBALS file.
Example: CREDENTIALSTORELOCATION /u01/app/oracle/OGG_PASSWD

  • Goto OGG home and connect to GGSCI.

cd $OGG_HOME
./ggsci
GGSCI>

Q2. How Is The Restartcollision Parameter Different From Handlecollisions?

The RESTARTCOLLISION parameter is used to skip ONE traction only in a situation when the GoldenGate process crashed and performed an operation (INSERT, UPDATE & DELETE) in the database but could not checkpoint the process information to the checkpoint file/table. On recovery it will skip the traction and AUTOMATICALLY continue to the next operation in the trail file.

When using HANDLECOLLISION GoldenGate will continue to overwritten and process tractions until the parameter is removed from the parameter files and the processes restarted.

Q3. What Are The Areas To Monitor In Goldengate Replication?

The lag and checkpoint latency of the Extract, pump and Replicat processes are normally monitored.

Q4. What Type Of Topology Does Goldenggate Support?

GoldenGate supports the following topologies:

  • Unidirectional
  • Bidirectional
  • Peer-to-peer
  • Broadcast
  • Consolidation
  • Cascasding

Q5. How Do You Add Credentials To The Credential Store?

ALTER CREDENTIALSTORE ADD USER userid,
[PASSWORD password]
[ALIAS alias]
[DOMAIN domain]
Example: GGSCI> ALTER CREDENTIALSTORE ADD USER GGS@orcl, PASSWORD oracle ALIAS extorcl DOMAIN OracleGoldenGate

Q6. What Are The Basic Resources Required To Configure Oracle Goldengate High Availability Solution With Oracle Clusterware?

There are 3 basic resources required:

  • Virtual IP
  • Shared storage
  • Action script

Q7. What Is The Best Practice To Delete The Extract Files In Ogg?

Use the manager process to delete the extract files after they are consumed by the extract/replicat process

PURGEOLDEXTRACTS /u01/app/oracle/dirdat/et*, USECHECKPOINTS, MINKEEPHOURS 2

Q8. What Is The Passthru Mode Used For?

In pass-through mode, the Extract process does not look up the table definitions, either from the database or from a data definitions file. This increases the throughput of the data pump, as the object definition look-up is bypassed.

Q9. What Are The Installation Options Available In Ogg 12c?

You can install Oracle GoldenGate 12c using in 2 ways:

  • Interactive Installation with OUI – Graphical interface
  • Silent Installation with OUI – Command Interface

Q10. Why Should I Upgrade My Goldengate Extract Processes To Integrated Extract?

Oracle is able to provide faster integration of the new database features by moving the GoldenGate Extraction processes into the database. Due to this, the GoldenGate Integrated Extract has a number of features like Compression which are not supported in the traditional Extract. You can read more about how to upgrade to Integrated Extract and more about Integrated Delivery. Going forward preference should be give to create new extracts as Integrated Extracts and also to upgrade existing traditional Extracts.

Q11. What Databases Supports Goldengate Integrated Delivery?

Oracle Integrated Delivery is only available for Oracle Databases.

Q12. How Do You Enable Oracle Goldengate For Oracle Database 11.2.0.4?

The database services required to support Oracle GoldenGate capture and apply must be enabled explicitly for an Oracle 11.2.0.4 database. This is required for all modes of Extract and Replicat.

To enable Oracle GoldenGate, set the following database initialization parameter. All instances in Oracle RAC must have the same setting.

ENABLE_GOLDENGATE_REPLICATION=true

Q13. What Parameters Can Be Used To Configure Oracle Goldengate To Extract Data From Archived Redo Log Files Only?

Use the TRANLOGOPTIONS ARCHIVEDLOGONLY option in the parameter file.

Q14. My Extract Was Running Fine For A Long Time. All Of A Sudden It Went Down. I Started The Extract Processes After 1 Hour. What Will Happen To My Committed Tractions That Occurred In The Database During

OGG checkpoint provides the fault tolerance and make sure that the traction marked for committed is capture and captured only once. Even if the extract went down abnormally, when you start the process again it reads the checkpoint file to provide the read consistency and traction recovery.

Q15. What Is The Purpose Of The Defgen Utility?

When the source and the target schema objects are not the same (different DDL’s) the Replicat process needs to know the source definition of the objects. The output from the DEFGEN utility is used in conjunction with the trail data to determine which column value in the trail belongs to which column.

Q16. What Are The Supplemental Logging Pre-requisites?

The following supplemental logging is required.

  • Database supplemental logging
  • Object level logging

Q17. How Do You Create A Coordinated Replicate In Ogg 12c?

You can create the COORDINATED REPLICATE with the following OGG Command:

ADD REPLICAT rfin, COORDINATED MAXTHREADS 50, EXTTRAIL dirdat/et

Q18. With Integrated Delivery, Where Can We Look For The Performance Stats?

Yes with 12c, performance statistics are collected in the AWR repository and the data is available via the normal AWR reports.

Q19. List The Minimum Parameters That Can Be Used To Create The Extract Process?

The following are the minimum required parameters which must be defined in the extract parameter file.

  • EXTRACT NAME
  • USERID
  • EXTTRAIL
  • TABLE

Q20. What Traction Types Does Goldengate Support For Replication?

Goldengate supports both DML and DDL Replication from the source to target.

Q21. What Command Is Used To Create The Credential Store?

ADD CREDENTIALSTORE.

Q22. If Have Created A Replicate Process In Ogg 12c And Forgot To Specify Discardfile Parameter. What Will Happen?

Starting with OGG 12c, if you don’t specify a DISCARDFILE OGG process now generates a dicard file with default values whenever a process is started with START command through GGSCI.

Q23. How Do You Create A Csv File From The Extracted Data?

You will have to use the CSV Flat File Adaptor to create CSV files. The source would be the extract trail files which use the configuration of the adaptor settings to generate CSV files.

Q24. What Is The Minimum Database Version Which Supports Integrated Delivery?

Oracle 11.2.0.4 is the the minimum required database version which supports both Integrated extract and Integrated Reaplicat.

Q25. How Do You View The Data Which Has Been Extracted From The Redo Logs?

The logdump utility is used to open the trail files and look at the actual records that have been extracted from the redo or the archive log files.

Q26. Why Would You Segregate The Tables In A Replication Configuration? How Would You Do It?

In OGG you can configure replicat at the data at the schema level or at the table level using TABLE parameter of extract and MAP parameter of replicat.
For replicating the entire database you can list all the schemas in the database in the extract/replicat parameter file.
Depending the amount of redo generation you can split the tables in a schema in multiple extracts and replicats to improve the performance of data replication. Alternatively youcan also group a set of tables in the confiuration by the application functionality.
Alternatively you may need to remove tables which have long running tractions in a seperate extract process to eliminte lag on the other tables.
Let’s say that you have a schema named SCOTT and it has 100 hundred tables.
Out of these hundred tables, 50 tables are heavily utilized by application.

To improve the overall replication performance you create 3 extract and 3 replicats as follows:
Ext_1/Rep_1 –> 25 tables
Ext_2/Rep_2 –> 25 tables
Ext_3/Rep_3 –> 50 tables
Ext_1/Rep_1 and Ext_2/Rep_2 contains 25 table each which are heavily utilized or generate more redo.
Ext_3/Rep_3 contains all the other 50 tables which are least used.

Q27. How Can We Report On Long Running Tractions?

The WARNLONGTRANS parameter can be specified with a threshold time that a traction can be open before Extract writes a warning message to the ggs error log.

Example: WARNLONGTRANS 1h, CHECKINTERVAL 10m

Q28. List A Few Parameters Which May Help Improve The Replicat Performance?

The parameters below can be used to improve the replicat performance:

  • BATCHSQL
  • GROUPTRANSOPS
  • INSERTAPPEND

Q29. I Want To Configure Multiple Extracts To Write To The Same Exttrail File? Is This Possible?

Only one Extract process can write to one exttrail at a time. So you can’t configure multiple extracts to write to the same exttrail.

Q30. What Are The Different Encryption Levels In Aes?

You can encrypt the password/data using the AES in three different keys

  • 128 bit
  • 192 bit and
  • 256 bit

Q31. What Are The Different Password Encryption Options Available With Ogg?

You can encrypt a password in OGG using

  • Blowfish algorithm and
  • Advance Encryption Standard (AES) algorithm

Q32. What Are The Different Data Encryption Methods Available In Ogg 12c?

In OGG 12c you can encrypt data with the following 2 methods:

  • Encrypt Data with Master Key and Wallet
  • Encrypt Data with ENCKEYS

Q33. What Does The Rman-08147 Warning Signify When Your Environment Has A Goldengate Capture Processes Configured?

This occurs when the V$ARCHIVED_LOG.NEXT_CHANGE# is greater than the SCN required by the GoldenGate Capture process and RMAN is trying to delete the archived logs. The RMAN-08147 error is raised when RMAN tries to delete these files.

When the database is open it uses the DBA_CAPTURE values to determine the log files required for mining. However if the database is in the mount state the V$ARCHIVED_LOG. NEXT_CHANGE# value is used.

Q34. What Command Can Be Used To View The Checkpoint Information For The Extract Process?

Use the following command to view the Extract checkpoint information.

GGSCI> info extract , showch

GGSCI> info extract ext_fin, showch

Q35. I Am Migrating My Oracle Database From Non-exadata To Exadata But My Source Ogg Software And Target Ogg Software Versions Are Different (say Source Is Running Ogg 11.1 And Target Is Running Ogg 11.2).

It is recommended that all instances of Oracle GoldenGate be the same version to take advantage of the new functionality, but this is not possible all the time and is not required. In this scenario, OGG provides a parameter called ‘FORMAT RELEASE’ which allows customers to use different versions of Oracle GoldenGate Extract, trail files, and Replicat together.

Example: RmtTrail /u01/app/oracle/dirdat, Format Release 11.1

Note: The input and output trails of a data pump must have the same trail file version.

Q36. What Are The Most Common Reasons Of The Replicate Process Slowing Down?

Some of the possible reasons are:

  • Large amount of tractions on a particular table.
  • Blocking sessions on the destination database where non-Goldengate tractions are also taking place on the same table as the replicat processing.
  • If using DBFS, writing & reading of trail files may be slow if SGA parameters are not tuned.
  • For slow Replicat’s, latency may be due to missing indexes on target.
  • Replicat having to process Update, delete of rows in very large tables.

Q37. What Are The Steps Required To Add A New Table To An Existing Replication Setup?

The steps to be executed would be the following:

  • Include the new table to the Extract & pump process.
  • Obtain starting database SCN and Copy the source table data to the target database
  • Start Replicat on target at the source SCN database point.

Q38. How Would You Look At A Trail File Using Logdump, If The Trail File Is Encrypted?

You must use the DECRYPT option before viewing data in the Trail data.
List few useful Logdump commands to view and search data stored in OGG trail files.
Below are few logdump commands used on a daily basis for displaying or analyzing data stored in a trail file.
$ ./logdump – to connect to the logdump prompt
logdump> open /u01/app/oracle/dirdat/et000001 – to open a trail file in logdump
logdump> fileheader on – to view the trail file header
logdump> ghdr on – to view the record header with data
logdump> detail on – to view column information
logdump> detail data – to display HEX and ASCII data values to the column list
logdump> reclen 200 – to control how much record data is displayed
logdump> pos 0 – To go to the first record
logdump> next (or simply n) – to move from one record to another in sequence
logdump> count – counting records in a trail

Q39. We Want To Setup One-way Data Replication For My Online Traction Processing Application. However There Are Compressed Tables In The Environment. Please Suggest How I Can Achieve It?

You must use OGG 11.2 and configure GoldenGate Integrated Capture process to extract data from compressed tables.

Note: Pre OGG 11.2 doesn’t support extracting data from compressed tables

Q40. How Does The Replicat Works In A Coordinated Mode?

In a Coordinated Mode Replicat operates as follows:

  • Reads the Oracle GoldenGate trail.
  • Performs data filtering, mapping, and conversion.
  • Constructs SQL statements that represent source database DML or DDL tractions (in committed order).
  • Applies the SQL to the target through the SQL interface that is supported for the given target database, such as ODBC or the native database interface.

Q41. What Are Some Of The Key Features Of Goldengate 12c?

The following are some of the more interesting features of Oracle GoldenGate 12c:

  • Support for Multitenant Database
  • Coordinated Replicat
  • Integrated Replicat Mode
  • Use of Credential store
  • Use of Wallet and master key
  • Trigger-less DDL replication
  • Automatically adjusts threads when RAC node failure/start
  • Supports RAC PDML Distributed traction
  • RMAN Support for mined archive logs

Q42. How Do You Retrieve Information From The Oracle Credential Store?

GGSCI> INFO CREDENTIALSTORE
OR
GGSCI> INFO CREDENTIALSTORE DOMAIN OracleGoldenGate

Q43. What Are The Different Ogg Initial Load Methods Available?

OGG has 2 functionalities, one it is used for Online data Replication and second for Initial Loading.

If you are replicating data between 2 homogeneous databases then the best method is to use database specific method (Exp/Imp, RMAN, Trportable tablespaces, Physical Standby and so on). Database specific methods are usually faster than the other methods.

—If you are replicating data between 2 heterogeneous databases or your replicat involves complex trformations, then the database specific method can’t be used. In those cases you can always use Oracle GoldenGate to perform initial load.

Within Oracle GoldenGate you have 4 different ways to perform initial load.

  • Direct Load – Faster but doesn’t support LOB data types (12c include support for LOB)
  • Direct Bulk Load – Uses SQL*LOAD API for Oracle and SSIS for MS SQL SERVER
  • File to replicat – Fast but the rmtfile limit is 2GB. If the table can’t be fit in 1 rmtfile you can use maxfiles but the replicat need to be registered on the target OGG home to read the rmtfiles from source.
  • File to Database utility – depending on the target database, use SQL*LOAD for Oracle and SSIS for MS SQL SERVER and so on.

Oracle GoldenGate initial loading reads data directly from the source database tables without locking them. So you don’t need downtime but it will use database resources and can cause performance issues. Take extra precaution to perform the initial load during the non-peak time so that you don’t run into resource contention.

Q44. What Does The Goldengate Csn Equate To, In The Oracle Database?

It is equivalent of the Oracle database SCN traction number.

Q45. I Have Configured Oracle Goldengate Integrated Capture Process Using The Default Values. As The Data Load Increases I See That Extract Starts Lagging Behind By An Hour (or More) And Database Performan

When operating in integrated capture mode, you must make sure that you have assigned sufficient memory to STREAMS_POOL_SIZE. An undersized STREAMS_POOL_SIZE or limiting the streams pool to use a specific amount of memory can cause troubles.

The best practice is to allocate STREAMS_POOL_SIZE at the instance level and allocate the MAX. SGA at GG process level as below:

SQL> alter system set STREAMS_POOL_SIZE=3G

TRANLOGOPTIONS INTEGRATEDPARAMS (MAX_SGA_SIZE 2048, PARALLELISM 4)

Q46. What Type Of Encryption Is Supported In Goldengate?

Oracle Goldengate provides 3 types of Encryption.

  • Data Encryption using Blow fish.
  • Password Encryption.
  • Network Encryption.

Q47. What Is The Difference Between Classic And Coordinated Replicat?

The difference between classic mode and coordinated mode is that Replicat is multi-threaded in coordinated mode. Within a single Replicat instance, multiple threads read the trail independently and apply tractions in parallel. Each thread handles all of the filtering, mapping, conversion, SQL construction, and error handling for its assigned workload. A coordinator thread coordinates the tractions across threads to account for dependencies among the threads.

Q48. What Is A Credential Store In Ogg 12c?

OGG Credential Store manages Encrypted Passwords and USERIDs that are used to interact with the local database and Associate them with an Alias. Instead of specifying actual USERID and Password in a command or a parameter file, you can use an alias. The Credential Store is implemented as an auto login wallet within the Oracle Credential Store Framework (CSF).

Q49. What Are The Most Common Reasons Of An Extract Process Slowing Down?

Some of the possible reasons are:

  • Long running batch tractions on a table.
  • Insufficient memory on the Extract side. Uncommitted, long running tractions can cause writing of a traction to a temporary area (dirtmp) on disk. Once the traction is committed it is read from the temporary location on the file system and converted to trail files.
  • Slow or overburdened Network.

Q50. What Are The Main Components Of The Goldengate Replication?

The replication configuration consists of the following processes:

  • Manager
  • Extract
  • Pump
  • Replicate