a) 450 MPa
b) 500 MPa
c) 700 MPa
d) 850 MPa
Ans: c
Category: RAILWAY ENGINEERING Questions
The side slope of embankments for a railway track is generally taken as
a) 1:1
b) 1.5:1
c) 2:1
d) 1:2
Ans: c
Number of dog spikes normally used per rail seat on curved track is
a) one on either side
b) two outside and one inside
c) one outside and two inside
d) two outside and two inside
Ans: b
Head width of 52 kg rail section is | RAILWAY ENGINEERING
a) 61.9 mm
b) 66.7mm
c) 67mm
d) 72.33 mm
Ans: c
The formation width for a double line Broad Gauge track in cutting (excluding drains) as adopted on Indian Railways is
a) 6.10 m
b) 8.84 m
c) 10.21 m
d) 10.82 m
Ans: c
The type of bearing plate used in all joints and on curves to give better bearing area to the rails is
a) flat mild steel bearing plate
b) mild steel canted bearing plate
c) cast iron anticreep bearing plate
d) none of the above
Ans: b