Enthalpy is defined as the amount of internal energy and the output of a thermodynamic system’s pressure and volume. Enthalpy is an energy-like property or state function that has energy dimensions (and is thus calculated in joules or erg units). The enthalpy H is equivalent to the sum of the internal energy E and the pressure P multiplied with volume V of the system i.e., H = E + PV, respectively.
Under the law of conservation of energy, the shift in internal energy is equal to the heat transmitted to the device, minus the work performed by it. If a change in volume at constant pressure is the only work performed, the change in enthalpy is exactly equal to the heat transferred to the device. The amount of energy is called the enthalpy (or latent heat of vaporization) and is expressed in units of joules per mole when energy needs to be applied to a substance to shift its phase from a liquid to a gas.
Enthalpy Change
The name given to the amount of heat evolved or consumed in a reaction conducted at constant pressure is Enthalpy transition. The symbol of Enthalpy H is referred to as “delta H”. At constant pressure, the equation for the change in internal energy, ∆U = q + w can be written as:
∆U = qP – p∆V
Where qP represents the heat absorbed by the system at constant pressure and – p∆V is the expansion work done due to the heat absorbed by the system. The above equation can be written in the terms of initial and final states of the system which is defined below:
UF – UI = qP –p(VF – VI)
Or qP = (UF + pVF) – (UI + pVI)
Enthalpy (H) can be written as H= U + PV. Putting the value in the above equation, we obtained:
qP = HF – HI = ∆H
Hence, change in enthalpy ∆H = qP, referred to as the heat consumed at a constant pressure by the system. At constant pressure, we can also write,
∆H = ∆U + p∆V
Some Key Points
The heat from the device is lost to the surrounding atmosphere during exothermic reactions. ∆H is negative for such reactions. During endothermic reactions, heat is absorbed from the atmosphere by the system. ∆H is positive for such reactions.
Enthalpy of Reactions:
Energy change (U) is equal to the amount of heat produced and the work carried out. Pressure-volume work is called work performed by an expanding gas (or just PV work). For instance, consider a gas-producing reaction, such as dissolving a piece of copper in concentrated nitric acid.
Cu(s)+ 4HNO3(aq) → Cu(NO3)2 (aq) + 2H2O(l) + 2NO2(g)
The quantity of PV work performed by multiplying the external pressure P by the volume change induced by the piston movement (almost V) is found. At constant external pressure, (here, atmospheric pressure),
W = −PΔV
The negative sign associated with PV work performed means that when the volume increases, the device loses energy. The work performed by the system is negative if the volume increases at constant pressure (V> 0), implying that a system has lost energy by performing work on its surroundings. Conversely, the work performed by the system is positive if the volume decreases (almost V<0), which implies that the environment has worked on the system, thereby increasing its energy.
The internal energy U of a system is the sum of all its components’ kinetic energy and potential energy. It is the inner energy shift that generates heat plus function. Chemists typically use a related thermodynamic quantity called enthalpy (H) to calculate the energy changes that occur in chemical reactions. Systems’ enthalpy is defined as the sum of their internal energy U plus the product of their pressure P and volume V:
H=U+PV
Since all state functions are internal energy, strain and volume, enthalpy is also a state function. We can therefore characterize a shift in enthalpy (‘H) accordingly.
ΔH=Hfinal −Hinitial
If at constant pressure (i.e. for a given P, ΔP=0) a chemical shift occurs, the change in enthalpy ( ΔH) is
ΔH=Δ(U+PV)
=ΔU + ΔPV
=ΔU + PΔV
Substituting q+w for ΔU (First Law of Thermodynamics) and −w for PΔV we obtain
ΔH=ΔU+PΔV
=qp+w−w
=qp
The p subscript is used here to emphasize that this equation is only valid for a constant pressure phase. It is observed that the shift in enthalpy, the H of the system, is equal to the heat obtained or lost at constant pressure.
ΔH=Hfinal−Hinitial
=qp
System in Thermodynamics
A thermodynamic system is a part of matter with a defined boundary on which we concentrate our attention. The system boundary might be fixed or flexible, and it can be real or fictitious. The 3 types of systems in Thermodynamics are-
-
Isolated System – A system that is separated from its surroundings is unable to exchange both energy and mass. The cosmos is thought to be a self-contained system.
-
Open System – Both mass and energy can be moved between the system and its surroundings in an open system.
-
Closed System – The transmission of energy happens across the closed system’s border, but the transfer of mass does not.
Different Branches of Thermodynamics
Thermodynamics has 4 major branches, they are
-
Classical Thermodynamics – The behaviour of matter is investigated using a macroscopic approach in Classical Thermodynamics. Individuals consider units such as temperature and pressure, which aids in the calculation of other properties and the prediction of the characteristics of the matter conducting the process.
-
Statistical Thermodynamics – Every molecule is in the limelight in Statistical Thermodynamics, which means that the properties of each molecule and how they interact are taken into account to characterise the behaviour of a group of molecules.
Tips to study Thermodynamics
Thermodynamics is one of the most important chapters in chemistry as aspects of it (Carnot Engine), also appears again in Physics in later chapters.
Thermodynamics also has a lot of weightage in competitive exams like JEE, etc. To get good marks in Thermodynamics, the fundamentals of the chapter, i.e. understanding of different types of systems and energy, etc must be crucial as it sets the base for the complex topic that builds on it. The students should start by going through the NCERT chapter once or twice and then solve all the NCERT Exercises. They can find solutions to these Exercises at ‘s official website. If the student has some doubts or needs revision of any topic of Thermodynamics, they can check out Vdantu’s Youtube Channel. Here they can find several video lectures on Thermodynamics and other topics.
Teachers also conduct live sessions where questions and solutions are discussed to help the students who don’t have the best means to a teacher. Solving questions is really important for understanding Thermodynamics as it has many concepts which relate to formulas and conditions. Students can find the list of important questions of thermodynamics and other topics at ;’s official website. Previous year’s questions are also one of the most suggested ways to study and prepare for exams as it helps to break down the questioning pattern and help the student to explore different types of questions.
This also helps them to create an exam-like situation that gives them a real test with time limits. They can find the papers and solutions at ‘s official website. Students should definitely utilize these FREE resources to clear their concepts and their way to get good marks. is trying to bring the best out of every child who wants to achieve something or has a zeal to do hard work. A little hard work with some guidance can help any child to achieve the sky and make their parents and teachers proud.