250+ TOP MCQs on Soil Samples and Samplers – 1 and Answers

Foundation Engineering Multiple Choice Questions on “Soil Samples and Samplers – 1”.

1. The depth of exploration for isolated spread footing is ___________
a) 1(frac{1}{2}) the width
b) 2(frac{1}{2}) the width
c) (frac{1}{2}) the width
d) (frac{1}{4}) the width
Answer: a
Clarification: The depth of exploration for isolated spread footing is one and a half times the width. While the depth of exploration is twice the height from stream bed to crest for concrete dams.

2. In hand operated rings in ‘auger and shell boring’ the depth of which it can be used is _________
a) 40 m
b) 30 m
c) 25 m
d) 15 m
Answer: c
Clarification: The hand operated rings in ‘auger and shell boring’ are used for depths up to 25 m and the mechanised rings up to 50 m. In auger boring, hand augers are used for depths up to about 6 m.

3. Auger is suitable for _______
a) soft to stiff clays
b) very stiff clays
c) sandy soils
d) hard clays
Answer: a
Clarification: Auger boring is suitable for soft to stiff clays as the soil samples can be removed in a less disturbed manner preserving most of the natural structure of sample as compared to the wash boring.

4. In rotator boring __________ is forced down the hallow drillrods.
a) glycerine
b) water solution of bentonite
c) dextrin
d) phenyl
Answer: b
Clarification: In rotator boring, a drilling mud, usually a water solution of bentonite with or without other admixtures is continuously forced down the hollow drilling rods. The mud returning upwards bring the cuttings to the surface.

5. A ________ sample has preserved natural structure of soil.
a) undisturbed
b) disturbed
c) non-representative
d) remoulded
Answer: a
Clarification: The undisturbed sample of the soil is the one which has the natural structure in a preserved state which may be obtained by freezing the sand up to the required depth.

6. ________ sample has the natural structure of soil as modified.
a) undisturbed
b) disturbed
c) representative
d) non-remoulded
Answer: a
Clarification: The disturbed sample of the soil has the natural structure of soil as modified due to the disturbance caused while collecting the soil sample. It is usually obtained by pump and shells with trap valve.

7. The area ratio of the sampler is __________

a) (frac{D_2^2-D_1^2}{D_1^2}×100)
b) (frac{D_1^2-D_2^2}{D_1^2}×100)
c) (frac{D_2^3+D_1^3}{D_1^2}×100)
d) (frac{D_2^2-D_1^2}{2D_1^2}×100)
Answer: a
Clarification: The area ratio of the soil sampler is defined as the ratio of the volume of the soil sample displaced by the sampler tube in proportion to the volume of sample.
∴ Area ratio=(frac{D_2^2-D_1^2}{D_1^2}×100.)

8. The inside clearance of the sampler is ________

a) (frac{D_3-D_1}{D_1} ×100 )
b) (frac{D_3+D_1}{D_1} ×100)
c) (frac{D_3-D_1}{D_3} )
d) (frac{D_3-D_1}{2D_1} ×100)
Answer: a
Clarification: The inside clearance of the sampler is defined as the difference between the outside diameter and the inside diameter of the core part through which the core enters.
∴ Inside clearance = (frac{D_3-D_1}{D_1} ×100. )

9. The outside clearance of the sampler is ______

a) (frac{D_3-D_1}{D_1} ×100 )
b) (frac{D_3+D_1}{D_1} ×100 )
c) (frac{D_2-D_4}{D_4} ×100 )
d) (frac{D_2+D_4}{D_4} ×100 )
Answer: c
Clarification: Outside clearance is the gap between the outer surface of the cutting edge and the outside surface of the sam¬pling tube. Outside clearance prevents frictional drag between the outside surface of the sampling tube and the walls of the borehole.

10. In the open drive samples, the tube head is provided with vents.
a) True
b) False
Answer: a
Clarification: In the open drive samples, the tube head is provided with vents. The vents or valves are provided so as to permit water and air to escape during driving. The check valve helps to retain sample when the sampler is raised.

11. In open drive samples, the tube is split into two parts.
a) True
b) False
View AnswerAnswer: a
Clarification: In open drive samples, the tube can be split into two parts. This type of sampler is known as the split-spoon sampler. The split tube may also contain an inside thin wall liner.