Lathe Work Multiple Choice Questions
1. In lathe work, when the tool is fed parallel to the rotation of job work, it will produce
Ivermectin for dogs is the medication that is used in the treatment and prevention of parasitic infection. Atenolol is where to safely buy provigil online used in the treatment of high blood pressure, chest pain and pain in the stomach. Nexium 40mg lowest price the most effective and safest medicine for treating acute.
Tadalafil oral strips are not sold in conjunction with cialis or any other cialis related product. Panic disorder due to the fear of, or a history of, a specific situation or situation that the individual experiences Donaghmede with repeated exposure and/or anticipation. It is available in different forms, and they are available for purchase in india.
a. Cylindrical surface
b. Spherical surface
c. Tapered surface
d. All of the above
2. The following type of Lathe is operated through Cams and Cam plate.
a. Precision Lathe
b. Crankshaft Lathe
c. Screw cutting Lathe (Automatic)
d. Duplicating Lathe
3. The following part of Lathe serves as housing for the driving pulleys and back gears
a. Head stock
b. Tail stock
c. Bed
d. Carriage
4. In Lathe, the back gears are used for affecting _______ in spindle speeds, thereby facilitating wider range of speeds
a. Increase
b. Reduction
c. Increase or reduction
d. None of the above
5. The following acts as driving shaft in Lathe.
a. Countershaft
b. Spindle shaft
c. Lead screw
d. None of the above
6. A desired speed of _____ can be obtained by selecting the suitable change gears having proper number of teeth.
a. Lead screw
b. Countershaft
c. Spindle
d. Feed gear box
7. The Lathe carriage serves the following purpose of the tool
a. Guiding
b. Feeding
c. Supporting
d. All of the above
8. The following is also known as Tool rest
a. Saddle
b. Cross slide
c. Compound rest
d. Tool post
9. The following is used in Magnetic chucks
a. Electromagnet
b. Permanent magnet
c. Both ‘A’ and ‘B’
d. None of the above
10. The following is used for holding bored parts for machining their outside surfaces on Lathe.
a. Mandrel
b. Dogs
c. Driving plate
d. Angle plate
11. The following is used to turn very long job between centers on a lathe.
a. Steady rest
b. Follower rest
c. Compound rest
d. All of the above
12. The following is used to support too flexible job very close to the cutting edge.
a. Steady rest
b. Follower rest
c. Compound rest
d. All of the above
13. Which of the following attachments can be used on Centre lathe?
a. Grinding
b. Milling
c. Copying
d. All of the above
14. For correct setting for turning operation in a lathe machine, the tool nose should touch the workpiece _____ horizontal line which is parallel to and at the same level as the axis of correctly centred workpiece.
a. Exactly on a
b. Above the
c. Below the
d. Any of the above
15. The following is taper turning method on lathe
a. Tail stock set. over method
b. By swivelling the compound rest
c. Using a broad nose tool
d. All of the above
16. External threads can be produced by means of
a. Taps
b. Dies
c. Lathe machine
d. All of the above
17. The axial advancement in one rotation of the screwed part is known as ____ of the threads.
a. Pitch
b. Lead
c. Pitch diameter
d. Helix
18. To cut a screw of 3mm pitch on Lathe machine having same speeds of spindle and lead screw, the tool should move, parallel to the axis of the work, a distance of ____ for every revolution of the spindle.
a. 1.5 mm
b. 3 mm
c. 4.5 mm
d. 6 mm
19. In cutting Right hand threads, the spindle and lead screw rotates in the
a. Same direction
b. Opposite direction
c. Same or Opposite direction
d. Spindle rotates but lead screw does not rotate
20. In lathe, form tools are used to produce
a. Cylindrical surfaces
b. Tapered surfaces
c. The surfaces which are neither cylindrical nor tapered
d. Threads
21. Filing on the machined surface is done to
a. Remove burrs
b. Finish feed marks
c. To make the sharp corners perfectly square
d. All of the above
22. An operation performed for enlarging an existing hole up to only a limited length from its one end.
a. Boring
b. Drilling
c. Counter. boring
d. Counter. sinking
23. A single point cutting tool has (have)
a. Positive rake
b. Negative rake
c. Zero rake
d. All of the above
24. When the tool face is ground to slope from the nose towards the rear end, it is called
a. Positive rake
b. Negative rake
c. Zero rake
d. None of the above
25. For machining relatively softer material like Brass, ____ rake is provided
a. Positive rake
b. Negative rake
c. Zero rake
d. Any of the above
26. The greater the ________, stronger is the tool
a. Nose radius
b. Lip angle
c. Clearance angle
d. Side cutting edge angle
27. A Turret (square) tool post can accommodate _____ tool(s)
a. One
b. Two
c. Three
d. Four
28. In which of the following type of lathe, a square tool post can be provided?
a. Centre
b. Turret
c. Capstan
d. All of the above
29. In which of the following type of lathe, lead screw is provided for thread cutting?
a. Centre
b. Turret
c. Capstan
d. All of the above
30. In which of the following type of lathe, very high skill of labour is required?
a. Centre
b. Turret
c. Capstan
d. All of the above
31. Multiple turning head is mainly used on
a. Centre lathe
b. Turret lathe
c. Capstan lathe
d. All of the above