250+ TOP MCQs on C2 Compounds – Vinyl Chloride and Answers

Chemical Technology Multiple Choice Questions on “C2 Compounds – Vinyl Chloride”.

1. What is the molecular weight of vinyl chloride?
a) 63
b) 62.5
c) 64
d) 63.5

Answer: b
Clarification: Chemical formula of vinyl chloride is CH2=CHCl. It contains 2 carbon atoms, 3 hydrogen atoms, and 1 chlorine atom with 12, 1, and 35.5 as their atomic weights respectively. Hence the molecular weight is 12*2+3*1+35.5*1=62.5.

2. Vinyl chloride is least soluble in __________________
a) Diethyl ether
b) Water
c) Alcohols
d) Carbon tetra chloride

Answer: b
Clarification: Vinyl chloride with molecular weight 62.5 is slightly soluble in water but it is soluble in diethyl ether, carbon tetra chloride, and alcohols. It is available in polymer grade (99% pure).

3. Which reagent is used for drying ethylene dichloride in the manufacturing process of vinyl chloride?
a) Calcium Carbonate
b) Sodium sulfate
c) Silica gel
d) Sulfuric acid

Answer: c
Clarification: Silica gel (desiccant) is the reagent used to dry ethylene dichloride, which on undergoing thermal pyrolysis produces vinyl chloride along with hydrochloric acid.

4. Which type of furnace is used for production of vinyl chloride?
a) Blast furnace
b) Tubular Cracking furnace
c) Condensing furnace
d) Modulating furnace

Answer: b
Clarification: Vaporized ethylene dichloride dried with silica gel is introduced into tubular cracking furnace where thermal pyrolysis of ethylene dichloride takes place. Products are vinyl chloride and hydrochloric acid.

5. Contact surface catalyst used in cracking furnace (vinyl chloride manufacture) within the tubes is ____________
a) Charcoal
b) Anthracite
c) Coke
d) Lignite

Answer: a
Clarification: Charcoal or pumice is used as contact surface catalyst within the tubes in tubular cracking furnace. 50% conversion and 95-96% yield are obtained.

6. What are the operating conditions of ethylene dichloride thermal pyrolysis reaction?
a) 500°C, 4 atm
b) 250°C, 4 atm
c) 500°C, 2 atm
d) 250°C, 2 atm

Answer: a
Clarification: Thermal pyrolysis reaction of ethylene dichloride is operated at a temperature of 500°C and a pressure of 4 atm. Increase in temperature increases carbon formation which is not favorable.

7. Catalyst used in acetylene-HCl reaction is ___________
a) Zinc pellets
b) Carbon pellets
c) Iron pellets
d) Graphite

Answer: b
Clarification: Carbon pellets impregnated on mercurous chloride is used as catalyst in acetylene-HCl reaction. Temperature is maintained at 160°C and it increases as catalyst deteriorates.

Leave a Reply

Your email address will not be published. Required fields are marked *