250+ TOP MCQs on Hydraulic Elements of Circular Sewers and Answers

Environmental Engineering Multiple Choice Questions on “Hydraulic Elements of Circular Sewers”.

1. Which of the following is incorrect regarding circular sewer?
a) It is easily manufactured
b) It offers more opportunities for deposits
c) It is the most economical section
d) It has uniform curvature
Answer: b
Clarification: The circular section has uniform curvature, so it offers less opportunities for deposits.

2. A circular section of sewer gives _______ area for a given perimeter.
a) Small
b) Large
c) Minimum
d) Maximum
Answer: d
Clarification: A circular section of sewer gives a maximum area for a given perimeter and gives the greatest hydraulic mean depth when running full or half.

3. What is the wetted perimeter of a circular section of sewer?
a) (22/7) *D2
b) (22/7) *D
c) (22/7) *D2
d) (22/7)2 *D
Answer: b
Clarification: The wetted perimeter of a circular section of sewer running full is (22/7) *D where D is the internal diameter of circular sewer.

4. The hydraulic mean depth of a circular section running full is __________
a)`D
b) D/2
c) D2
d) D/4
Answer: d
Clarification: The hydraulic mean depth, R = Area of cross section / Wetted perimeter
= ((22/7) *D2/4) / (22/7) *D
= D/4.

5. The proportional depth of a circular sewer running partially half is __________
a) (1-cosK/2)
b) (1/2) * (1-sinK/2)
c) (1/2) * (1-cosK/2)
d) (1-cosK/2)2
Answer: c
Clarification: Depth of flow d = (D/2) * (1-cosK/2)
Proportional depth = Depth of flow d / Diameter of section D = (D/2) * (1-cosK/2) / D
= (1/2) * (1-cosK/2).

6. The proportional perimeter of a circular sewer running partially half where K is the central angle subtended at a circular section of sewer is __________
a) K/360o
b) K/90o
c) K/270o
d) K/180o
Answer: a
Clarification: Proportional perimeter of a circular sewer running partially half =
(22/7) *D*K/360o / ((22/7) *D) = K/360o.

7. The diameter of the circular sewer is 0.2m. The desired depth of flow is __________
a) 2/3 of the circular section of sewer
b) 1/3 of the circular section of sewer
c) 1/2 of the circular section of sewer
d) 1/4 of the circular section of sewer
Answer: c
Clarification: When the diameter of the sewer is up to 0.4m, they are designed to flow at 1/2 depth.

8. The diameter of a circular sewer is 0.8m. The desired depth of flow is __________
a) 2/3 of the circular section of sewer
b) 1/3 of the circular section of sewer
c) 1/2 of the circular section of sewer
d) 1/4 of the circular section of sewer
Answer: a
Clarification: When the diameter of the sewer is between 0.4m and 0.8m, they are designed to flow at 2/3 depth.

9. A circular sewer having 0.4m diameter is flowing with velocity 2m/Sec. If the gradient of sewer is 1 in 90. Find the value of Chezy’s coefficient?
a) 10
b) 30
c) 60
d) 40
Answer: d
Clarification: Hydraulic mean depth, R = D/4 = 0.4/4 = 0.1m
Slope of sewer S = 1/100, velocity V = 1m/Sec
According to Chezy’s formula, V = C (RS) 1/2 = C* (0.1/90) 1/2 = C/30
C = V*30 = 2*30 = 60.