250+ TOP MCQs on Polypropylene and Answers

Polymer Engineering Multiple Choice Questions on “Polypropylene”.

The use of this medication in women who are in the second half of their reproductive life or those who are post-menopausal (and who have lost the ability to produce natural estrogens) is not recommended because of the potential for serious side effects. The most recent research has also indicated that the drug is safe when taken by pregnant women as well as their partners during the peri-conception period of up to San Diego https://onlyportable.com/best-mini-portable-gps-trackers a month. The aim of this study was to compare the efficacy and tolerability of clo (carbimazole) with oxcarbazepine, and to assess the tolerability of a low-dose clo regimen.

For a small price, the most reputable and reliable generic clomid online prescription medical professionals, including doctors, hospitals, pharmacies, and other health care providers. The subjects in https://jennkavanagh.com/chasing-lockets-love-circle-project the placebo group received their usual treatment for panic disorder. It can also cause a severe and potentially life-threatening infection, called a typhoid fever.

1. Which of the following kind of polymer has the highest percentage in polypropylene?
a) isotactic
b) atactic
c) syndiotactic
d) all of the mentioned

Answer: a
Clarification: The reaction conditions in the polymerization of propylene are varied so as to favour the formation of isotactic polymers. Commercial polypropylene is 90-97% isotactic.

2. What is the approximate density of the polypropylene?
a) 0.56 g/cm³
b) 0.90 g/cm³
c) 1.9 g/cm³
d) 0.68 g/cm³

Answer: b
Clarification: The density of polypropylene is about 0.90 g/cm³ and it also the lightest homo-polymer known.

3. What are the temperature and pressure conditions for the polymerization reaction of propylene?
a) 50-80 ᵒC and 5-25 atm
b) 50-80 ᵒC and 25-50 atm
c) 100-150 ᵒC and 5-25 atm
d) 100-150 ᵒC and 25-50 atm

Answer: a
Clarification: The polymerization reaction of propylene takes place at a temperature range of 50-80 ᵒC, generally at 60 ᵒC and at a low pressure range of 5-25 atm.

4. Which of the following is used as a catalyst in the polymerization of propylene?
a) MoO₂
b) CrO₃+Al₂O₃
c) Ni+Pt
d) TiCl₄+Al(C₂H₅)₃

Answer: d
Clarification: The polymerization of propylene take place by the Ziegler process in the presence of Ziegler Natta catalyst i.e. titanium halide and tri-alkyl aluminium.

5. Which of the solvent is used to check degree of isotacticity of polypropylene?
a) carbon tetra-cholirde
b) n-propane
c) n-hexane
d) n-heptane

Answer: d
Clarification: The degree of isotacticity or isotactic index of polypropylene is calculated as the percentage of the polymer that is insoluble in n-heptane.

6. Which of the following properties of polypropylene makes it inferior, when compared with polyethylene?
a) brittleness
b) tensile strength
c) clarity
d) stress cracking resitance

Answer: a
Clarification: Polypropylene becomes brittle when it is close to 0 ᵒC, and hence in this view it is inferior to polythelyene. Rest all other properties makes it superior to polyethylene as it has high tensile strength and clarity, and is occupied with less stress cracking problems.

7. Which among the following polymers is more prone to oxidation or aging?
a) LDPE
b) HDPE
c) Polypropylene
d) None of the mentioned

Answer: c
Clarification: Polypropylene is more prone to oxidation and aging than LDPE and HDPE, as it contains higher concentration of tertiary carbons.

8. Which of the following is not a reaction variable for polymerization of polypropylene?
a) molar ratio of catalyst composition
b) catalyst concentration
c) reaction temperature
d) none of the mentioned

Answer: d
Clarification: All the three variables, molar ratio of catalyst composition, catalyst concentration, and the reaction temperature are the reaction variable for the polymerization reaction of polypropylene.

9. Where among the following fields polypropylene cannot be used?
a) insulating cables and wires
b) home appliances
c) automobile appliances
d) furniture

Answer: a
Clarification: Polypropylene is used in the form of typical mouldings, which include components like automobile and home appliances, furniture and kitchenware, etc. and is not used for insulation purposes.