250+ TOP MCQs on Pulse Code Modulation & Answers

Digital Communications Multiple Choice Questions on “Pulse code modulation”.

1. The signals which are obtained by encoding each quantized signal into a digital word is called as
A. PAM signal
B. PCM signal
C. FM signal
D. Sampling and quantization
Answer: B
Clarification: Pulse code modulation is the name for the class of signals which are obtained by encoding the quantized signals into a digital word.

2. The length of the code-word obtained by encoding quantized sample is equal to
A. l=log(to the base 2)L
B. l=log(to the base 10)L
C. l=2log(to the base 2)L
D. l=log(to the base 2)L/2
Answer: A
Clarification: The quantized sample which are digitally encoded into l bit value code-word. The length l can be calculated as l=log(to the base 2)L.

3. Quantization noise can be reduced by ________ the number of levels.
A. Decreasing
B. Increasing
C. Doubling
D. Squaring
Answer: B
Clarification: The process of quantization replaces the true signal with the approximation(quantization noise). By increasing the number of quantization level the quantization noise can be reduced.

4. In PCM encoding, quantization level varies as a function of ________
A. Frequency
B. Amplitude
C. Square of frequency
D. Square of amplitude
Answer: B
Clarification: In linear PCM the quantization levels are uniform. But in normal PCM encoding the quantization level vary according to the amplitude, based of A-law of Myu-law.

5. What is bit depth?
A. Number of quantization level
B. Interval between two quantization levels
C. Number of possible digital values to represent each sample
D. None of the mentioned
Answer: C
Clarification: One of the properties of PCM signal which determines its stream fidelity is bit depth which is the number of possible digital values that can be used to represent each sample.

6. Choosing a discrete value that is near but not exactly at the analog signal level leads to
A. PCM error
B. Quantization error
C. PAM error
D. Sampling error
Answer: B
Clarification: One of the limitations of PCM is quantization error which occurs when we choose a discrete value at some near by value and not at the analog signal level.

7. In PCM the samples are dependent on ________
A. Time
B. Frequency
C. Quanization leavel
D. Interval between quantization level
Answer: A
Clarification: The samples depend on time,an accurate clock is required for accurate reproduction.

8. DPCM encodes the PCM values based on
A. Quantization level
B. Difference between the current and predicted value
C. Interval between levels
D. None of the mentioned
Answer: B
Clarification: Differential PCM encodes the PCM value based on the difference between the previous sample and the present sample value.

9. Delta modulation uses _____ bits per sample.
A. One
B. Two
C. Four
D. Eight
Answer: A
Clarification: Delta modulation is used for analog to digital conversion and vice versa. It is a simple form of DPCM. Its uses 1 bit per sample. It also depends on the difference between the current and previous sample values.

10. Sample resolution for LPCM ____ bits per sample.
A. 8
B. 16
C. 24
D. All of the mentioned
Answer: D
Clarification: Common sampling resolution for LPCM are 8, 16, 20, 24 bits per sample.

11. Adaptive DPCM is used to
A. Increase bandwidth
B. Decrease bandwidth
C. Increase SNR
D. None of the mentioned
Answer: B
Clarification: Adaptive DPCM is used to decrease required bandwidth for the given SNR.

/s/” target=”_blank” rel=”noopener noreferrer”>