250+ TOP MCQs on Velocity – Pressure Finite Element Model and Answers

Finite Element Method Multiple Choice Questions on “Velocity – Pressure Finite Element Model”.

1. In velocity-pressure formulation in FEM, which step is not used in the development of a weak form?
a) Multiply governing equations with weight functions
b) Integrating over the element domain
c) Integrating by parts
d) Performing coordinate transformation
Answer: d
Clarification: In the development of weak form, we consider a typical element and develop the finite element model over it by following the three-step procedure. Firstly, multiply governing equations with weight functions and Integrate over the element domain. Secondly, perform integration by parts and, thirdly, define the coefficient of weight function.

2. In the formulation of governing equations, which option does not signify the characteristics of a weight function?
a) Weight functions are multiplied to governing equations to obtain weak forms
b) Weight functions are interpreted from the physical setup of the problem
c) Weight function must denote a non-dimensional quantity
d) Weight function can be interpreted as a velocity
Answer: c
Clarification: In the development of the weak form, we consider a typical element and multiply its governing equations with weight functions. They can be interpreted physically for a given equation; for example, in the momentum equation, the weight function must be interpreted as velocity. For the representing volume change, weight function is like pressure. Thus, it can be a dimensional quantity.

3. For a governing equation, what does one conclude from the weak formulation if it does not contain boundary integral involving weight function?
a) Integration by parts is used
b) Integration by parts is not used
c) The weight function is as a primary variable
d) The weight function is to be made continuous across inter-element boundaries
Answer: b
Clarification: For a governing equation, the weak formulation does not contain boundary integral if there is no integration by parts used, this implies that the weight function is not a primary variable but a part of the secondary variables, this, in turn, requires that the weight function is not to be made continuous across inter-element boundary.

4. In FEM, which option is the correct weak form of the following momentum equation?
ρ(frac{partial v_x}{partial t}-frac{partial sigma _{xx}}{partial x}-frac{partial sigma_{xy}}{partial y}-f_x)=0
a)l(int_{Omega_e}[rho w_1frac{partial v_x}{partial t}+frac{partial w_1}{partial x}sigma_{xx}+frac{partial w_1}{partial y}sigma_{xy}-w_1 f_x])dxdy+∮_┏c w₁(σ_xxn_x+σ_xyn_y)ds=0
b) l(int_{Omega_e}[rho w_1frac{partial v_x}{partial t}+frac{partial w_1}{partial x}sigma_{xx}+frac{partial w_1}{partial y}sigma_{xy}-w_1 f_x])dxdy=0
c) l(int_{Omega_e}[rho w_1frac{partial v_x}{partial t}+frac{partial w_1}{partial x}sigma_{xx}+frac{partial w_1}{partial y}sigma_{xy}-w_1 f_x])dxdy+∮_┏c w₁(σ_xx+σ_xy)ds=0
d) l(int_{Omega_e} w_1[rhofrac{partial v_x}{partial t}-frac{partial sigma_{xx}}{partial x}-frac{partial sigma_{xy}}{partial y}-f_x])dxdy++∮_┏c w₁(σ_xxn_x+σ_xyn_y)ds=0
Answer: a
Clarification: The three-step procedure obtains the weak forms of the momentum equation over an element. Firstly, multiply the governing equation with weight function w₁ and integrate over the element domain Ω_e. Secondly, perform integration by parts and thirdly define the coefficient of weight function. Thus, the weak form must contain two separate integrals, the terms (frac{partial w_1}{partial x}) and σ_xxn_x.

5. Using constitutive relations, what is the value of τ_xxif μ=0.3 and v=4x?
a) 0.24
b) 2.4
c) 0.12
d) 1.2
Answer: b
Clarification: From constitutive relations, τ_xx=2μ(frac{partial v_x}{partial x}), where μ is the coefficient of viscosity.
(frac{partial v_x}{partial x})
= (frac{partial (4x)}{partial x})
=4.
Thus τ_xx=2*μ*4.
Given μ=0.3
τ_xx=2*0.3*4
=2.4.

6. Using constitutive relations, what is the value of τ_xyif μ=0.3 and v=4xy-6y?
a) 0.24x
b) 2.4x
c) 0.12x
d) 1.2x
Answer: d
Clarification: From constitutive relations, τ_xy=μ((frac{partial v_x}{partial y}+frac{partial v_y}{partial x})), where μ is the coefficient of viscosity. On comparing v=4xy+6y with v=vx+vy, we get vx=4xy and vy =6y.
(frac{partial v_x}{partial y}+frac{partial v_y}{partial x})
=4x+0
=4x.
Thus τ_xy=μ*(4x).
Given μ=0.3
τ_xx=0.3*4x
=1.2x.

7. If a governing equation represents volume change in an element, then the weight function in its weak form must be like a force that causes the volume change.
a) True
b) False
Answer: a
Clarification: The governing equation (frac{partial v_x}{partial y}+frac{partial v_y}{partial x}) represents the volume change in an element of dimensions dx and dy. Therefore, the weight function (w) in its weak form must be like a force that causes the volume change. Volume changes occur under the action of hydrostatic pressure, hence w=-P.

8. Which option is not correct concerning the pressure variable, P in the weak form of the momentum and continuity equation?
a) P is a primary variable
b) P is a part of the secondary variables
c) P=constant is the minimum continuity requirement for interpolation
d) It is discontinuous across inter-element boundaries
Answer: a
Clarification: In the weak form of the continuity equation, there is no boundary integral involving weight function because no integration by parts is used, this implies that P is not a primary variable; it is a part of the secondary variables, this, in turn, requires that P not be made continuous across inter-element boundaries. The minimum continuity requirement for interpolation of P is that P=constant.

9. Which option is not correct concerning the velocity variables, v_x and v_y in the weak form of the momentum and continuity equation?
a) They are primary variables
b) The minimum continuity requirement for interpolation is that they are linear in x and y
c) The minimum continuity requirement for interpolation is that they are constant
d) They are continuous across the inter-element boundary
Answer: c
Clarification: In the weak form of the continuity equation, the boundary integral involving weight function is present by the use of integration by parts. It implies that v_x and v_y are primary variables; this, in turn, requires that v_x and v_y to be continuous across inter-element boundaries. The minimum continuity requirement for interpolation of v_x and v_y is that they are linear in x and y.

10. Which equation is the correct vector form of the finite element model of momentum and continuity equations in the flow domain?
a) MΔ+K¹¹Δ+K¹²P=0
b) MΔ+K¹¹Δ+K²²P=F¹
c) MΔ+K²²Δ+K¹²P=F¹
d) MΔ+K¹¹Δ+K¹²P=F¹
Answer: d
Clarification: The equation MΔ+K¹¹Δ+K¹²P=F¹ gives the vector form of the finite element model of momentum and continuity equations in the flow domain, where F is force matrix, M is a mass matrix, K¹¹is related to velocity term, K¹² is related to the pressure term, P is the pressure matrix, and Δ is the velocity matrix.

11. For the vector form of the finite element model of momentum and continuity equations MΔ+K¹¹Δ+K¹²P=0, what is the correct expression for mass matrix M?
a) M=∫_Ωcρψ^Tψdx
b) M=∫_Ωcfψ^Tψdx
c) M=∫_Ωctψ^Tψdx
d) M=∫_ΩcPψ^Tψdx
Answer: a
Clarification: The vector form of the finite element model in the flow domain is , MΔ+K¹¹Δ+K¹²P=F¹ where F is force matrix, M is a mass matrix, K¹¹ is related to velocity term, K¹² is related to the pressure term, P is the pressure matrix, and Δ is the velocity matrix. M is a mass matrix as it contains the mass density values of elements, thus M=∫_Ωcρψ^Tψdx, where ρ denotes the mass density.

12. For the vector form of the finite element model of momentum and continuity equations MΔ+K¹¹Δ+K¹²P=0 what is the order of matrix F if the order of M is 2n x 2n?
a) 2n x 1
b) 1 x 2n
c) m x 2n
d) 2n x m
Answer: a
Clarification: In the vector form, the terms M and K¹¹ are of the order 2n x 2n, K¹² is of the order 2n x m, K²¹ is of the order m x 2n. The equation MΔ+K¹¹Δ+K¹²P=F¹ gives the vector form, where F is force matrix, M is a mass matrix, K¹¹ is related to velocity term, K¹² is related to the pressure term, P is the pressure matrix, and Δ is the velocity matrix. Note that

13. In matrix algebra, if a matrix is positive definite, then all its eigenvalues are greater than zero.
a) True
b) False
Answer: a
Clarification: A positive definite matrix is a symmetric matrix with all eigenvalues greater than zero. The FEM model of the continuity equation does not contain the pressure term, P. Therefore, the assembled equations also have zero in diagonal elements corresponding to the nodal values of P (i.e., the system of equations is not positive-definite).

14. What is the physical interpretation of the weight function w3 in the following weak form of the continuity equation?
-∫_Ωew₃((frac{partial v_x}{partial x}+frac{partial v_y}{partial y}))dxdy=0
a) Hydrostatic pressure
b) Axial force
c) Surface traction
d) Body force
Answer: a
Clarification: The weak form of the continuity equation represents the volume change in an element of dimensions dx and dy. Therefore, the weight function (w3) must be like a force that causes the volume change. Volume changes occur under the action of hydrostatic pressure. Hence, w3 is like -P.