The terms clockwise and counterclockwise are used to describe the direction in which a rotating object turns. This demonstration will help you understand how this directly affects pressure on each side of a propeller or fan blade as it spins. This demo is to help you understand the effects of clockwise and counterclockwise rotating propellers on pressure. To do this, there are two things that will be demonstrated: the effect of a fan blade rotating clockwise vs. counterclockwise when placed in front of an opening, and the difference in airflow through two fans rotating in opposite directions. Take a fan blade and place it flat side down on top of the opening to your hand while you are holding your hand up to the opening. Spin it by using your other hand to spin the blade clockwise or counterclockwise. You will notice that when spun clockwise, the blade will create a high-pressure zone around your hand. The opposite happens when you spin the blade counterclockwise: there is a low-pressure zone around your hand. This is because the spinning of a blade creates lift, and in turn causes airflow which pushes against surfaces on one side with high pressure and pulls on the surfaces of an adjacent object with low pressure. This is what causes lift, as well as the force that will cause a spinning propeller to push or pull an aircraft.
Clockwise and Counterclockwise in Detail
The rotation in a two-dimensional plane about a fixed point can be of two types- clockwise and counterclockwise. These two terms are used for indicating the direction.
Clockwise
When we move something in a clockwise direction, it is moving in the same direction as the hands on the clock.
()
Example of clockwise: Most screws, lock,s and taps are closed by turning in the clockwise direction.
Counterclockwise
When something moves in the opposite direction to the way in which the hands of a clock move round in known as counterclockwise. The counterclockwise direction is also known as the anticlockwise direction.
()
Examples of Counterclockwise: Just opposite of clockwise when we open screw, lock, and taps we have to move in the anticlockwise direction.
Let’s have a look at some examples of clockwise and counterclockwise For measuring angle we use clockwise and counterclockwise directions.
When we measure the positive angle, we should move in the clockwise direction, as shown in the below diagram.
()
When we measure the negative angle, we should move in the counterclockwise direction. Shown in the below diagram.
()
What is Clockwise?
Clockwise is the motion that proceeds in a similar direction as a clock’s hands move. The clockwise movement usually starts from the top going around to the right, then to the bottom, to the left, and then back to the top position.
What is Counterclockwise?
Counterclockwise is the opposite sense of clockwise rotation. The movement in the counterclockwise direction, starts from the top, heads to the right, goes down, then follows to the right side, and ends up at the top position.
Abbreviations Used for Clockwise and Counterclockwise:
-
Clockwise is usually abbreviated as CW.
-
Counterclockwise abbreviated as CCW. As we know, Counterclockwise is also known as anticlockwise so abbreviated as ACW.
Difference Between Clockwise and Counterclockwise:
The major difference between the two is based on rotations.
-
In clockwise rotation, the motion starts from the top position, heads to the right side, goes to the bottom position, heads to left, and finally goes up to the top position.
-
Whereas on the other hand counterclockwise starts from the top position, goes to the left side, proceeds to the bottom position, then heads to the right side, and finally reaches the top position.
Solved Question:
1. Kabir is facing north. He turns 45° in the clockwise direction and then another 90in the same direction and then again 180° in the clockwise direction. Which direction he is facing now?
Sol: Here the starting point is north as Kabir is facing north. Draw a diagram from the given question to visualize in all directions.
()
()
Let the starting point be O and A be the point in the north direction. So, from A point, he moves 45° in a clockwise direction that is OB. Then turn 90° in the same direction that is OC. Finally, he turns 180° in the same direction at point D. From the above diagram, we can say that Kabir is facing the northwest direction and the distance is OD.