Carpentry Multiple Choice Questions – Carpentry shop
1. Rings that trees produce each year are ___ .
a. Annual rings
b. Cup rings
c. Cambium layer
d. Medullary rays
2. Market form of timber which rough squared log:
a. Log
b. Posts
c. Planks
d. Balk
3. Pivoted window is similar to:
a. Sliding window
b. Bay window
c. Casement window
d. Corner window
4. Mortise gauge has ___ scribing pins.
a. One
b. Two
c. Three
d. Four
5. Wire nails which exceed 130 mm in length are named as:
a. Clasp nail
b. Oval wire nail
c. Spikes
d. Coach screw
6. The replica or facsimile of model is called:
a. Casting
b. Mould
c. Pattern
d. Core
7. Which one of the following is not a boring tool?
a. Bradawl
b. Gimlet
c. Auger
d. C. Clamp
8. Sharpening angle of chisel varies from:
a. 0° – 10°
b. 20° – 25°
c. 30° – 35°
d. 45° – 90°
9. The end opposite to tang of a file is called:
a. Face
b. Edge
c. Heel
d. Point
10. Centre most position of a timber cross. section is called:
a. Medulla
b. Bark
c. Sap wood
d. Hart wood
11. Spoke shave is used for smoothening:
a. Plane surfaces
b. Interior surfaces
c. Curved surfaces
d. Rough surfaces
12. Scarf point is under:
a. Widening joint
b. Framing joint
c. Lengthening joint
d. Dowel joint
13. For cutting along the grains ___ saws are used.
a. Rip saw
b. Cross. cut saw
c. Dovetail saw
d. Compass saw
14. Forming a conical shape in the end of a hole is said to be:
a. Bracing
b. Drilling
c. Counter sinking
d. Boring
15. General direction on alignment of wood cells in timber refers:
a. Color
b. Smell
c. Grain
d. Density
16. Yellow color represents in pattern making for:
a. Castings
b. Core prints
c. Split pattern
d. None of the above
17. Band saw is mainly used for
a. Cross cutting
b. Re. sawing
c. Curve cutting
d. Fine cutting
18. Which of the following saw has an open handle?
a. Dovetail saw
b. Panel saw
c. Rip saw
d. Cross. cut saw
19. Cracks develop between the adjacent annual rings is called:
a. Cup shake
b. Heart shake
c. Twisting
d. Star shake
20. Another name of jig saw is:
a. Scroll saw
b. Pad saw
c. Fret saw
d. Nest of saw
21. Following vice is used for sharpening of saws:
a. Bench vice
b. Pin vice
c. Carpenter’s vice
d. Saw vice
22. Strongest form of an angle joint used in cabinet work:
a. Halving joint
b. Dovetail joint
c. Mortise and Tenon joint
d. Housing joint
23. Blade material in wooden jack plane is
a. High carbon steel
b. High speed steel
c. Mild steel
d. None of the above
24. In wooden jack plane, blade angle with horizontal is
a. 35°
b. 40°
c. 45°
d. 50°
25. Floowing plane is used to make surface true
a. Wooden Jack Plane
b. Iron Jack Plane
c. Trying Plane
d. None of the above
26. Following type of file is used in wood work
a. Bastard file
b. Rasp file
c. Half round file
d. All of the above
27. Following type of tool is used in carpentry shop for making holes in wooden piece
a. Hand drill
b. Ratchet drill
c. Gimlet drill
d. All of the above
28. Clamping vice is used for
a. Sawing
b. Joining
c. Cutting
d. All of the above
29. C. clamp is used for
a. Cutting
b. Sawing
c. Pasting
d. All of the above
30. The following hammer is used for striking as well as for pulling the nails from the wood.
a. Cross Peen Hammer
b. Claw Hammer
c. Mallet
d. All of the above
31. Following hammer is made up of wood
a. Cross Peen Hammer
b. Claw Hammer
c. Mallet
d. All of the above
32. Water stone is used to re. sharpen
a. Chisels
b. Bits
c. Blades
d. All of the above
33. Following is used for cutting the wood at different angles.
a. Mitre box
b. C. clamp
c. Bench hook
d. Clamping vice
34. Mortise is a form of
a. projection
b. cavity
c. Both a. and b
d. None of the above
35. Tenon is a form of
a. projection
b. cavity
c. Both a. and b
d. None of the above
36. Following are the types of wood work
a. Lengthening joints
b. Widening joints
c. Framing joints
d. All of the above
37. Following types of machines are used in carpentry shop
a. Lathe machine
b. Grinder
c. Thickness planning Machine
d. All of the above
38. Following operation(s) is (are) performed on Circular saw
a. Grooving
b. Rebating
c. Tenoning
d. All of the above
39. Lathe machine is used in wood work for producing
a. Round symmetrical jobs
b. Flat jobs
c. Both a. and b
d. None of the above
40. Following machine is used to saw the wood lengthwise
a. Lathe machine
b. Thickness planner
c. Band saw
d. All of the above