1. The rivet head used for boiler plate riveting is usually
2. The radial distance of a tooth from the pitch circle to the top of the tooth is called
3. In order to remove internal stresses produced by hardening the steel, the process usually adopted is
4. In a gear, having involute teeth, the normal to the involute is a tangent to the
5. When carbon in the cast iron is principally in the form of graphite, the cast iron will be of
6. The metal suitable for bearings subjected to heavy loads is
7. A localised compressive stress at the area of contact between two members is known as
8. A sliding bearing which operates without any lubricant present, is called
9. Euler’s formula for a mild steel column is not valid if the slenderness ratio is
10. The lower deviation is the algebraic difference between the
Question 1 of 10