[Chemistry Class Notes] on Selenium Pdf for Exam

Selenium is a type of chemical element having atomic number 34 in the Periodic Table of the Elements. Selenium is in the fourth period of the sixth group of the main (A) subgroup of the Periodic Table. Selenium is one of the important elements for some species, including humans. Human bodies contain about 14 milligrams of cells, and every human body cell consists of more than a million selenium atoms. Having less amount of selenium can cause health problems to a human body, but too much is also very dangerous. Excess amounts of Selenium will disturb the development of an embryo or foetus.

Selenium is a chemical element that is placed in the 16th group and 4th period in the periodic table. The symbol of the selenium element is Se. It is a nonmetal element with the atomic number 34. It shows similar properties as sulphur, tellurium, and arsenic. Sulphur is placed above selenium and tellurium is placed below selenium in the 16th group of the periodic table. Arsenic is found at the left of selenium in the 4th period and 15th group. As it is found in the 16th group so, it is a p – block element. Due to its various properties sometimes, it is considered as a metalloid as well. 

Selenium was discovered and isolated by Swedish Chemists Jöns Jacob Berzelius and Johann Gottlieb Gahn in 1817. The word selenium is derived from the Greek word ‘Selene’ which means moon. It is rarely found as pure ore or in pure elemental form. It is generally found in metal sulphide ores. For commercial use selenium is mostly produced as a byproduct of the refining of metal sulfide ores. 

Selenium is found as red, grey and black allotropes of it. Its 7 isotopes are available in nature. Apart from these, it has many synthetic isotopes as well, although all of its synthetic isotopes are unstable in nature. Out of seven naturally occurring isotopes, 5 are stable and two are unstable.

Electronic Configuration of Selenium

Selenium atoms have a positively charged nucleus, inside of this nucleus there are 34 protons and 45 neutrons, and those 34 electrons move in three orbits. Selenium electron configuration can be defined as :

Se – 122s22p63s23p63d104s24p4

Notation of electronic configuration of Selenium is defined as :

Se – [Ar]3d104s24p4

Atoms of Selenium and Br+1 , Kr+2 have the same electronic configuration.

The shell filling order of a selenium atom with the electrons are : 

1s → 2s → 2p → 3s → 3p → 4s → 3d → 4p → 5s → 4d → 5p → 6s → 4f → 5d → 6p → 7s → 5f → 6d → 7p.

Here, on the s sublevel, up to 2 electrons can be present, on the s level,up to 6 electrons, on the d level, up to 10 electrons and on the f level, up to 14 electrons.

Atomic number of selenium is 34. Its electronic configuration is 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p4 or it can be written as:

Ar 3d10 4s2 4p4. It has 2 electrons in K – shell, 8 electrons in L – shell, 18 electrons in M – shell and 6 electrons in its outermost shell

Properties of Selenium 

Properties of Selenium includes :

  • It is a type of non-metal element having atomic number 34. 

  • Atomic mass of Selenium is 78.96.

  • Selenium can easily be mixed up with different metals and nonmetals directly or with the help of aqueous solution. 

  • Melting point of Selenium is 494K.

  • Boiling point of Selenium is 958K.

  • Density of Selenium is 4.81g/cm3.

Physical and Chemical Properties of Selenium

The physical and chemical properties of selenium are listed below:

  • It is found as solid at 20 ℃ temperature. 

  • The relative atomic weight of selenium is 78.96.

  • Its melting point is 221 ℃.

  • The boiling point of selenium is 685 ℃.

  • It shows a hexagonal crystal structure.

  • Its density is 4.809 g cm-3.

  • It forms a strongly acidic oxide.

  • According to the Pauling scale, its electronegativity is 2.55

  • Its crystal structure is hexagonal.

  • It has many isotopes. Its 5 isotopes are stable which are 74Se, 76Se, 77Se, 78Se, 80Se. although its key isotope is 80Se.

  • It forms several isotopes.

Optical Properties:

Selenium conducts some amount of electricity. Thus, it is a semiconductor. Selenium is also a photoconductor. It can change light energy into electrical energy. It has been found in research that its conductivity increases in presence of light which means its photoconductivity increases as the intensity of light increases.

Uses of Selenium 

Selenium is used in various fields mainly due to its properties such as photoconductivity, semiconductor of electricity etc. A few of its uses are listed below –

  • It is widely used in glassmaking and pigmentation. These are the main commercial uses of selenium in today’s world. 

  • It is used in photocells as it is a photoconductor. 

  • In the past selenium used to dominate the electronics market as it is a semiconductor but presently silicon has almost replaced selenium.

  • It is used in fluorescent quantum dots and surges protectors.

  • A small amount of selenium salts are necessary for the proper functioning of cells in many organisms. 

  • It is an ingredient of infant formula.

  • It is a component of many enzymes such as thioredoxin reductase, deiodinase enzymes. 

  • Selenium dioxide is used in manganese electrolysis.

  • It is used to make alloys. Such as in brasses selenium is used in place of lead which is more toxic than selenium. It is used in copper alloys as well.

  • It is used in Li – Se batteries.

  • It is used in thin-film solar cells of copper indium gallium selenide.

  • It is used in flat-panel x-ray detectors.

  • Organoselenium compounds are used in the vulcanization of rubber.

  • It is used in photocopying machines. 

  • Zinc selenide is used in blue LEDs. 

  • Selenium-75 is used in industrial radiology as a gamma source.

  • Nowadays, the selenium compound (selenium sulphide) is widely used for the treatment of dandruff. It works as an antifungal agent.

  • Selenium element is used for making photocopiers and laser printers.

  • It is also used for improving the qualities of copper and steel that get tanned through the application of selenious acid.

  • Because of its semiconductor properties, selenium is also used in manufacturing of solar batteries and quantum dots.

  • Selenium is also used for the generation of Cadmium red, a dye for glass and plastics.

Disadvantages of Selenium 

Selenium is an essential trace element, but its high concentrations are harmful to the environment. Selenium is a toxic element and its high concentrations are not only harmful to the environment but to human health as well. It affects our ecosystem as well. A high concentration of selenium in fishes may cause swelling of gills and blood flow within the gills. Selenium may cause cataracts, damage to liver tissues, respiratory problems etc. 

Overexposure to selenium may cause bronchitis, asthma, vomiting, lungs dysfunction, diarrhoea, abdominal pain, shortness of breath and in severe cases death. 

Generally required or necessary amounts of selenium is consumed by animals and humans through food, but more amount of selenium is consumed by them through its accumulation in the environment. Selenium enters the environment as selenium dioxide through the combustion of coal and oils. 

High concentrations of selenium may cause reproductive failures, defects in infants. Although its deficiency may also cause many adverse effects on health. Selenium deficiency may cause Kashin – beck disease, stress, low functioning of the brain, white muscle disease in ruminants, dysfunction of thyroid gland etc. Although after research it has been said that all these effects of selenium deficiency are generally accompanied by deficiency of other vitamins or other diseases. 

  • Selenium is somewhat safe if its doses taken are less than 400 mcg daily, but selenium becomes unsafe if high doses are taken for a long time. 

  • Selenium doses above 400 mcg daily will increase the risk of developing selenium toxicity.

  • Lower doses of selenium for a long time can increase the risk of developing diabetes.

  • Selenium is also responsible for causing stomach discomfort, headache, and rash. 

  • High doses of selenium can even cause hair loss, fatigue, nausea, vomiting, and weight loss. 

  • And the extremely high doses of selenium can lead to organ failure and death.

Selenium: Summary in Tabular form

Selenium

Symbol 

Se 

Discovered By 

Jons Jacob Berzelius and isolated by Johann Gottlieb Gahn 

Atomic number 

34 

Relative atomic weight 

78.96

Crystal Structure 

Hexagonal 

State at 20℃

Solid 

Melting point 

221℃

Boiling point 

685℃

Period 

4th

Group 

16th 

Block 

p

Electronic configuration 

1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p4 or

Ar

Ar 3d10 4s2 4p4

Main properties 

Semiconductor and photoconductor 

Main use 

Glass making, As an antifungal agent 

Disadvantage 

Toxicity 

This ends our
coverage on the topic “Selenium”. We hope you enjoyed learning and were able to grasp the concepts. We hope after reading this article you will be able to solve problems based on the topic. If you are looking for solutions to NCERT Textbook problems based on this topic, then log on to the website or download Learning App. By doing so, you will be able to access free PDFs of NCERT Solutions as well as Revision notes, Mock Tests and much more.

Leave a Reply

Your email address will not be published. Required fields are marked *