300+ [UPDATED] Digital Signal Processing Interview Questions and Answers

Q1. Distinguish Between Linear Convolution And Circular Convolution Of Two Sequences?

Linear convolution:

If x(n) is a sequence of L number of samples and h(n) with M number of samples, after convolution y(n) will have N=L+M-1 samples.

It can be used to find the response of a linear filter.

Zero padding is not necessary to find the response of a linear filter.

Circular convolution:

If x(n) is a sequence of L number of samples and h(n) with M samples, after convolution y(n) will have N=max(L,M) samples.

It cannot be used to find the response of a filter.

Zero padding is necessary to find the response of a filter.

Q2. What Are The Different Types Of Arithmetic In Digital Systems.?

There are three types of arithmetic used in digital systems. They are fixed point arithmetic, floating point ,block floating point arithmetic.

Q3. How One Can Design Digital Filters From Analog Filters?

  • Map the desired digital filter specifications into those for an equivalent analog filter.
  • Derive the analog trfer function for the analog prototype.
  • Trform the trfer function of the analog prototype into an equivalent digital filter trfer function.

Q4. What Is Rounding?

Rounding a number to b bits is accomplished by choosing a rounded result as the b bit number closest number being unrounded.

Q5. Define Periodic And Aperiodic Signal?

A signal x (n) is periodic in period N, if x (n+N) =x (n) for all n. If a signal does not satisfy this equation, the signal is called aperiodic signal.

Q6. What Are The Elementary Discrete Time Signals?

Unit sample sequence (unit impulse)

δ (n)= {1 n=0

0 Otherwise

Unit step signal

U (n) ={ 1 n>=0

0 Otherwise

Unit ramp signal

Ur(n)={n for n>=0

0 Otherwise

Exponential signal

x (n)=an where a is real

x(n)-Real signal

Q7. What Are The Different Quantization Methods?

Truncation and Rounding

Q8. How Many Multiplications And Additions Are Required To Compute N Point Dft Using Radix-2 Fft?

The number of multiplications and additions required to compute N point DFT using radix-2 FFT are N log2 N and N/2 log2 N respectively,.

Q9. State The Structure Of Iir Filter?

IIR filters are of recursive type whereby the present o/p sample depends on present i/p, past i/p samples and o/p samples. The design of IIR filter is realizable and stable.

The impulse response h(n) for a realizable filter is

h(n)=0 for n≤0

Q10. What Is Bilinear Trformation?

The bilinear trformation is a mapping that trforms the left half of S-plane into the unit circle in the Z-plane only once, thus avoiding aliasing of frequency components.

The mapping from the S-plane to the Z-plane is in bilinear trformation is


Q11. What Are The Advantages & Disadvantages Of Bilinear Trformation?


  • The bilinear trformation provides one-to-one mapping.
  • Stable continuous systems can be mapped into realizable, stable digital systems.
  • There is no aliasing.


  • The mapping is highly non-linear producing frequency, compression at high frequencies.
  • Neither the impulse response nor the phase response of the analog filter is preserved in a digital filter obtained by bilinear trformation.

Q12. Mention The Procedures For Digitizing The Trfer Function Of An Analog Filter.?

The two important procedures for digitizing the trfer function of an analog filter are:

  • Impulse invariance method. 
  • Bilinear trformation method.

Q13. Define Time Variant And Time Invariant System?

A system is called time invariant if its output , input characteristics dos not change with time.


A system is called time variant if its input, output characteristics changes with time.


Q14. What Is Truncation?

Truncation is a process of discarding all bits less significant than LSB that is retained

Q15. Define Dynamic And Static System?

A discrete time system is called static or memory less if its output at any instant n depends almost on the input sample at the same time but not on past and future samples of the input.

e.g. y(n) =a x (n)

In anyother case the system is said to be dynamic and to have memory. 

e.g. (n) =x (n)+3 x(n-1)

Q16. Why The Computations In Fft Algorithm Is Said To Be In Place?

Once the butterfly operation is performed on a pair of complex numbers (a,b) to produce (A,B), there is no need to save the input pair. We can store the result (A,B) in the same locations as (a,b). Since the same storage locations are used troughout the computation we say that the computations are done in place.

Q17. State The Methods For Evaluating Inverse Z-trform.?

  • Direct valuation by contour integration.
  • Expion into series of terms in the variable Z and Z-@
  • Partial fraction expion and look up table.

Q18. What Is Product Quantization Error?

The product quantization errors arise at the out put of the multiplier. Multiplication of a b bit data with a b bit coefficient results a product having 2b bits. Since a b bit register is used the multiplier output will be rounded or truncated to b bits which produces the error.

Q19. Define Stable And Unable System?

A system is said to be stable if we get bounded output for bounded input.

Q20. What Is Meant By Fixed Point Number?

In fixed point number the position of a binary point is fixed. The bit to the right represent the fractional part and those to the left is integer part.

Q21. State Properties Of Roc.?

  • The ROC does not contain any poles.
  • When x(n) is of finite duration then ROC is entire Z-plane except Z=0 or Z=∞.
  • If X(Z) is causal,then ROC includes Z=∞.
  • If X(Z) is anticasual,then ROC includes Z=@

Q22. What Are The Methods To Prevent Overflow?

  1. Saturation arithmetic and
  2. Scaling

Q23. What Are The Quantization Errors Due To Finite Word Length Registers In Digital Filters?

  1. Input quantization errors
  2. Coefficient quantization errors
  3. Product quantization errors

Q24. What Is The Principle Of Designing Fir Filter Using Frequency Sampling Method?

In frequency sampling method the desired magnitude response is sampled and a linear phase response is specified .The samples of desired frequency response are identified as DFT coefficients. The filter coefficients are then determined as the IDFT of this set of samples.

Q25. What Are The Design Techniques Of Designing Fir Filters?

There are three well known methods for designing FIR filters with linear phase .They are (1.)Window method (2.)Frequency sampling method (3.)Optimal or minimax design.

Q26. What Is Fft?

The Fast Fourier Trform is an algorithm used to compute the DFT. It makes use of the symmetry and periodicity properties of twiddle factor to effectively reduce the DFT computation time.It is based on the fundamental principle of decomposing the computation of DFT of a sequence of length N into successively smaller DFTs.

Q27. What Are The Advantages Of Floating Point Representation?

  1. Large dynamic range
  2. Overflow is unlikely.

Q28. What Are The Different Types Of Fixed Point Arithmetic?

Depending on the negative numbers are represented there are three forms of fixed point arithmetic. They are sign magnitude,1’s complement,2’s complement

Q29. State The Properties Of Dft?

  1. Periodicity
  2. Linearity and symmetry
  3. Multiplication of two DFTs
  4. Circular convolution
  5. Time reversal
  6. Circular time shift and frequency shift
  7. Complex conjugate
  8. Circular correlation

Q30. What Is Overlap-save Method?

In this method the data sequence is divided into N point sections xi(n).Each section contains the last M-1 data points of the previous section followed by L new data points to form a data sequence of length N=L+M-1.In circular convolution of xi(n) with h(n) the first M-1 points will not agree with the linear convolution of xi(n) and h(n) because of aliasing, the remaining points will agree with linear convolution. Hence we discard the first (M-1) points of filtered section xi(n) N h(n). This process is repeated for all sections and the filtered sections are abutted together.

Q31. Write A Short Note On Pre-warping.

The effect of the non-linear compression at high frequencies can be compensated. When the desired magnitude response is piece-wise constant over frequency, this compression can be compensated by introducing a suitable pre-scaling, or pre-warping the critical frequencies by using the formula.

Q32. What Dif Algorithm?

It is a popular form of the FFT algorithm. In this the output sequence X(k) is divided into smaller and smaller sub-sequences , that is why the name Decimation In Frequency.

Q33. Distinguish Between Fir Filters And Iir Filters?

FIR filter:

  • IR filter
  • These filters can be easily designed to have perfectly linear phase.
  • FIR filters can be realized recursively and non-recursively.
  • Greater flexibility to control the shape of their magnitude response.
  • Errors due to round off noise are less severe in FIR filters, mainly because feedback is not used.

IIR filter:

  • These filters do not have linear phase.
  • IIR filters are easily realized recursively.
  • Less flexibility, usually limited to specific kind of filters.
  • The round off noise in IIR filters is more.

Q34. What Are The Advantages Of Kaiser Window?

  • It provides flexibility for the designer to select the side lobe level and N
  • It has the attractive property that the side lobe level can be varied continuously from the low value in the Blackman window to the high value in the rectangular window

Q35. What Are The Different Types Of Filters Based On Impulse Response?

Based on impulse response the filters are of two types:

  1. IIR filter
  2. FIR filter

The IIR filters are of recursive type, whereby the present output sample depends on the present input, past input samples and output samples.

The FIR filters are of non recursive type, whereby the present output sample depends on the present input sample and previous input samples.

Q36. What Is Zero Padding?what Are Its Uses?

Let the sequence x(n) has a length L. If we want to find the N-point DFT(N>L) of the sequence x(n), we have to add (N-L) zeros to the sequence x(n). This is known as zero padding.

The uses of zero padding are:

  1. We can get better display of the frequency spectrum.
  2. With zero padding the DFT can be used in linear filtering.

Q37. What Is Dit Algorithm?

Decimation-In-Time algorithm is used to calculate the DFT of a N point sequence. The idea is to break the N point sequence into two sequences, the DFTs of which can be combined to give the DFt of the

original N point sequence.This algorithm is called DIT because the sequence x(n) is often splitted into smaller sub- sequences.

Q38. What Are Differences Between Overlap-save And Overlap-add Methods?

Overlap-save method:

In this method the size of the input data block is N=L+M-1

Each data block consists of the last M-1 data points of the previous data block followed by L new data points

In each output block M-1 points are corrupted due to aliasing as circular convolution is employed

To form the output sequence the first

M-1 data points are discarded in each output block and the remaining data are fitted together

Overlap-add method:

In this method the size of the input data block is L

Each data block is L points and we append M-1 zeros to compute N point DFT

In this no corruption due to aliasing as linear convolution is performed using circular convolution

To form the output sequence the last

M-1 points from each output block is added to the first M-1 points of the succeeding block

Q39. What Is Overlap-add Method?

In this method the size of the input data block xi(n) is L. To each data block we append M-1 zeros and perform N point circular convolution of xi(n) and h(n). Since each data block is terminated with M-1 zeros the last M-1 points from each output block must be overlapped and added to first M-1 points of the succeeding blocks.This method is called overlap-add method.

Q40. Define Discrete Time System?

A discrete or an algorithm that performs some prescribed operation on a discrete time signal is called discrete time system.

Q41. Define Symmetric And Antisymmetric Signal?

A real value signal x (n) is called symmetric (even) if x (-n) =x (n). On the other hand the signal is called antisymmetric (odd) if x (-n) =x (n).

Q42. What Is Input Quantization Error?

The filter coefficients are computed to infinite precision in theory. But in digital computation the filter coefficients are represented in binary and are stored in registers. If a b bit register is used the filter coefficients must be rounded or truncated to b bits ,which produces an error.

Q43. When Cascade Form Realization Is Preferred In Fir Filters?

The cascade form realization is preferred when complex zeros with absolute magnitude is less than one.

Q44. What Is Trposition Theorem & Trposed Structure?

The trpose of a structure is defined by the following operations:

  • Reverse the directions of all branches in the signal flow graph
  • Interchange the input and outputs.
  • Reverse the roles of all nodes in the flow graph.
  • Summing points become branching points.
  • Branching points become summing points.

According to trposition theorem if we reverse the directions of all branch trmittance and interchange the input and output in the flowgraph, the system function remains unchanged.

Q45. Define Sectional Convolution?

If the data sequence x(n) is of long duration it is very difficult to obtain the output sequence y(n) due to limited memory of a digital computer. Therefore, the data sequence is divided up into smaller sections. These sections are processed separately one at a time and controlled later to get the output.

Q46. What Is Meant By Radix-2 Fft?

The FFT algorithm is most efficient in calculating N point DFT. If the number of output points N can be expressed as a power of 2 that is N=2M, where M is an integer, then this algorithm is known as radix-2 algorithm.

Q47. State Some Applications Of Dsp?

Speech processing ,Image processing, Radar signal processing.

Q48. Define Discrete Time Signal?

A discrete time signal x (n) is a function of an independent variable that is an integer. a discrete time signal is not defined at instant between two successive samples.

Q49. What Are The Applications Of Fft Algorithm?

The applications of FFT algorithm includes:

  1. Linear filtering
  2. Correlation
  3. Spectrum analysis

Q50. What Is Meant By Floating Pint Representation?

In floating point form the positive number is represented as F =2CM,where is mantissa, is a fraction such that1/2