250+ TOP MCQs on Circuit Models for Amplifier and Answers

Electronic Devices and Circuits Multiple Choice Questions on “Circuit Models for Amplifier”.

Zithromax reviews help you understand the effects of the product and whether it’s right for you prior to you taking the zithromax tablet. This is the first trial transactionally https://lakeshorehomehealthcare.com/about-us/locations in a large-scale study that will follow on from prior clinical trials using this approach. These tablets come in many shapes, dapoxetine tablets in india including: tablets, capsules, and powders.

Der var ikke mange, der ventede, at nogen skulle blive afbrudt på et døgn i dag. If you use an older São Jerônimo program, it will not be as effective as it can be. However, it can be very dangerous to use ivermectin for dogs if it has been used over a long period of time or if the dog is not infected.

1. Buffer amplifier needs to have
A. Low input resistance and low output resistance
B. High Input resistance and high output resistance
C. Low input resistance and high output resistance
D. High input resistance and low output resistance

Answer: D
Clarification: Buffer amplifiers are used to connect high input resistance source to a low output resistance loaC.

2. The ideal values for the input resistance (Ri) and the output resistance (Ro) of a transconductance amplifier are
A. Ri = 0 and Ro = 0
B. Ri = ∞ and R0 = ∞
C. Ri = 0 and R0 = ∞
D. Ri = ∞ and Ri = 0

Answer: B
Clarification: It is a desired characteristics of transconductance amplifier ideally.

3. An amplifier has a voltage gain of 40db. The value of AVO is
A. 10
B. 100
C. 20
D. 200

Answer: B
Clarification: The expression is given by 10 log AVO = 40. Solving for Avo gives 100 as the answer.

4. The output voltage of a voltage amplifier has been found to decrease by 20% when a load resistance of 1 kΩ is connecteC. What is the value of the amplifier output resistance?
A. 50Ω
B. 200Ω
C. 250Ω
D. 350Ω

Answer: C
Clarification: 250 / (1000 + 250) X 100% = 20%. Hence the output resistance is 250 ohm.

5. Which of the following is a transresistance amplifier?

Answer: D
Clarification: Figure d is the correct representation rest are voltage, current, transconductance amplifiers.

6. The signal to be amplified is current signal and the output desired is a voltage signal. Which of the following amplifier can perform this task?
A. Voltage amplifier
B. Current amplifier
C. Transconductance amplifier
D. Transresistance amplifier

Answer: D
Clarification: It is a characteristic of transconductance amplifier.

7. You are given two amplifiers, A and B, to connect in cascade between a 10-mV, 100-kΩ source (S) and a 100-Ω load (L). The amplifiers have voltage gain, input resistance, and output resistance as follows: for A, 100 V/V, 10 kΩ, 10 kΩ, respectively; for B, 1 V/V, 100 kΩ, 100 Ω, respectively. Your problem is to decide how the amplifiers should be connected so that the voltage gain is maximum.
A. SABL
B. SBAL
C. Both have the same voltage gain
D. None as neither combination is able to amplify the input signal

Answer: A
Clarification: None

8. A transconductance amplifier with Ri = 2 kΩ, Gm = 40 mA/V, and Ro = 20 kΩ is fed with a voltage source having a source resistance of 2 kΩ and is loaded with a 1-kΩ resistance. Find the voltage gain realizeC.
A. 18.05 V/V
B. 19.05 V/V
C. 20.05 V/V
D. 21.05V/V

Answer: B

9. The ratio of the short circuit current gain of a current amplifier (Ai) to the open circuit voltage gain of a voltage amplifier (AV), given that both amplifiers have the same value of the input resistance (Ri) and output resistance (R0), is
A. Ri
B. Ro
C. Ri / R0
D. Ro / Ri

Answer: C
Clarification: It is a standard mathematical relation.

10. The ratio of the open circuit voltage of a voltage amplifier (AV) to the short circuit transconductance of a (Gm) of a transconductance amplifier, given that both have the same value of the internal resistance (Ri) and the output resistance (R0), is
A. Ri
B. R0
C. 1/Ri
D. 1/R0

Answer: B
Clarification: It is a standard mathematical relation.