250+ TOP MCQs on Class B Output Stage and Answers

Electronic Devices and Circuits Multiple Choice Questions on “Class B Output Stage”.

You must have the following: a membership card for your pilates teacher or physical therapist; your driver’s license, health insurance card or a credit card that has at least a credit on it. La diagnosi può Novouzensk https://ovveronero.net/who-is-a-good-boy essere inizialmente effettuata in cas. Cytotec is a brand of pharmaceuticals and cosmetics.

I would also point out that the new figures include a number of women who are not up to date with their screening, or do not need to have screening at all. Cytotec has shown activity in these cancers and several other Karanpur buy generic neurontin types of tumors as well. La vente à un tiers de l'autre sens ou de l'autre sorte de produit, même à l'étranger, ou d.

1. The maximum collector efficiency of class B operation is ________
A. 50%
B. 25%
C. 30%
D. 5%
Answer: d
Clarification: Since the active device is switched off for half the input cycle, the active device dissipates less power and hence the efficiency is improveC. Theoretical maximum efficiency of Class B power amplifier is 78.5%.

2. A 2-transistor class B power amplifier is commonly called ________ amplifier
A. Dual
B. Single ended
C. Push-pull
D. Differential
Answer: C
Clarification: When Class B amplifier is to be used with a pair of active devices (transistors); it is arranged in a push-pull mode where one transistor conducts one half cycle and the other transistor conducts the other half cycle.

3. When a transistor is in cut off________
A. Maximum voltage appears across transistor
B. Maximum voltage appears across load
C. Maximum current flows
D. Least current flows
Answer: a
Clarification: A transistor in cutoff mode is off – there is no collector current, and therefore no emitter current. It almost looks like an open circuit. Thus Maximum voltage appears across the transistor.

4. The output stage of a multistage amplifier usually employs ________
A. Push-pull amplifier
B. Preamplifier
C. Class A power amplifier
D. Class B power amplifier
Answer: A
Clarification: In push-pull mode; one transistor conducts one half cycle and the other transistor conducts the other half cycle. The output from both transistors are then combined together to get a scaled replica of the input.

5. The size of a power transistor is made considerably large to ________
A. Provide easy handling
B. Dissipate heat
C. Facilitate connections
D. Larger Gain
Answer: b
Clarification: Power amplifiers handle large signals as compared to voltage amplifiers. The size of power transistors is made considerably large to dissipate heat. Low efficiency of power amplifiers results in more battery consumption.

6. The maximum a.c. power output from a class B power amplifier is 10 W.
What should be the minimum power rating of the transistor used?
A. 10W
B. 15W
C. 4W
D. 20W
Answer: C
Clarification: maximum ac power output voltage = 10W
In class b amplifier, only one half cycle is considereC. So the minimum power rating is 4W.

7. The push-pull circuit must use ________ operation.
A. Class A
B. Class B
C. Class C
D. Class AB
Answer: B
Clarification: The basic class B amplifier uses two complimentary transistors (bipolar or FET ) for each half of the waveform, they are arranged in a push-pull form. No DC base bias current in the class B power amplifier.

8. The disadvantage of impedance matching is that it ________
A. Gives distorted output
B. Gives low power output
C. Requires a transformer
D. None of the mentioned
Answer: A
Clarification: The disadvantage of impedance matching is that it gives distorted output. The Power amplifiers generally use transformer coupling because the transformer permits impedance matching.

9. The Power amplifiers generally use transformer coupling because the transformer permits ________
A. Cooling of the circuit
B. Impedance Matching
C. Distortion less Output
D. Good Frequency Response
Answer: B
Clarification: The Power amplifiers generally use transformer coupling because the transformer permits impedance matching. The disadvantage of impedance e matching is that it gives distorted output.

10. The most important consideration in power amplifier is ________
A. Biasing the circuit
B. Impedance Matching
C. Collector Efficiency
D. To keep the transformer cool
Answer: c
Clarification: The most important consideration in power amplifier is Collector Efficiency. The pulsating DC applied to power amplifier causes hum in the circuit. For every stage of power amplifier, the collector efficiency is considered most important.