300+ TOP POINTERS Interview Questions and Answers pdf

POINTERS Interview Questions for freshers and experienced :-

1. What is indirection?

If you declare a variable, its name is a direct reference to its value. If you have a pointer to a variable, or any other object in memory, you have an indirect reference to its value. If p is a pointer, the value of p is the address of the object. *p means “apply the indirection operator to p”; its value is the value of the object that p points to. (Some people would read it as “Go indirect on p.”)

*p is an lvalue; like a variable, it can go on the left side of an assignment operator, to change the value. If p is a pointer to a constant, *p is not a modifiable lvalue; it can’t go on the left side of an assignment.

Consider the following program. It sExplain Hows that when p points to i, *p can appear wherever i can.

int main()
int i;
int *p;
i = 5;
p = & i; /* now *p == i */
printf(“i=%d, p=%P, *p=%d\n”, i, p, *p);
*p = 6; /* same as i = 6 */
printf(“i=%d, p=%P, *p=%d\n”, i, p, *p);
return 0;
After p points to i (p = &i), you can print i or *p and get the same thing. You can even assign to *p, and the result is the same as if you had assigned to i.

2. How many levels of pointers can you have?

The answer depends on Explain What you mean by “levels of pointers.” If you mean “Explain How many levels of indirection can you have in a single declaration?” the answer is “At least 12.”

int i = 0;

int *ip01 = & i;

int **ip02 = & ip01;

int ***ip03 = & ip02;

int ****ip04 = & ip03;

int *****ip05 = & ip04;

int ******ip06 = & ip05;

int *******ip07 = & ip06;

int ********ip08 = & ip07;

int *********ip09 = & ip08;

int **********ip10 = & ip09;

int ***********ip11 = & ip10;

int ************ip12 = & ip11;

************ip12 = 1; /* i = 1 */

If you mean “Explain How many levels of pointer can you use before the program gets hard to read,” that’s a matter of taste, but there is a limit. Having two levels of indirection (a pointer to a pointer to something) is common. Any more than that gets a bit harder to think about easily; don’t do it unless the alternative would be worse.

If you mean “Explain How many levels of pointer indirection can you have at runtime,” there’s no limit. This point is particularly important for circular lists, in which each node points to the next. Your program can follow the pointers forever.

Consider the following program “A circular list that uses infinite indirection”.

/* Would run forever if you didn’t limit it to MAX */
struct circ_list
char value[ 3 ]; /* e.g., “st” (incl ‘\0’) */
struct circ_list *next;
struct circ_list suffixes[] = {
“th”, & suffixes[ 1 ], /* 0th */
“st”, & suffixes[ 2 ], /* 1st */
“nd”, & suffixes[ 3 ], /* 2nd */
“rd”, & suffixes[ 4 ], /* 3rd */
“th”, & suffixes[ 5 ], /* 4th */
“th”, & suffixes[ 6 ], /* 5th */
“th”, & suffixes[ 7 ], /* 6th */
“th”, & suffixes[ 8 ], /* 7th */
“th”, & suffixes[ 9 ], /* 8th */
“th”, & suffixes[ 0 ], /* 9th */
#define MAX 20
int main()
int i = 0;
struct circ_list *p = suffixes;
while (i <= MAX) { printf( “%d%s\n”, i, p->value );
p = p->next;
return 0;
Each element in suffixes has one suffix (two characters plus the terminating NUL character) and a pointer to the next element. next is a pointer to something that has a pointer, to something that has a pointer, ad infinitum.

The example is dumb because the number of elements in suffixes is fixed. It would be simpler to have an array of suffixes and to use the i%10’th element. In general, circular lists can grow and shrink.

3. What is a null pointer?

There are times when it’s necessary to have a pointer that doesn’t point to anything. The macro NULL, defined in , has a value that’s guaranteed to be different from any valid pointer. NULL is a literal zero, possibly cast to void* or char*. Some people, notably C++ programmers, prefer to use 0 rather than NULL.

You can’t use an integer when a pointer is required. The exception is that a literal zero value can be used as the null pointer. (It doesn’t have to be a literal zero, but that’s the only useful case. Any expression that can be evaluated at compile time, and that is zero, will do. It’s not good enough to have an integer variable that might be zero at runtime.)

4. When is a null pointer used?

The null pointer is used in three ways:

1. To stop indirection in a recursive data structure.

2. As an error value.

3. As a sentinel value.

1. Using a Null Pointer to Stop Indirection or Recursion

Recursion is when one thing is defined in terms of itself. A recursive function calls itself. The following factorial function calls itself and therefore is considered recursive:

/* Dumb implementation; should use a loop */
unsigned factorial( unsigned i )
if ( i == 0 || i == 1 )
return 1;
return i * factorial( i – 1 );
A recursive data structure is defined in terms of itself. The simplest and most common case is a (singularly) linked list. Each element of the list has some value, and a pointer to the next element in the list:

struct string_list
char *str; /* string (in this case) */
struct string_list *next;
There are also doubly linked lists (which also have a pointer to the preceding element) and trees and hash tables and lots of other neat stuff. You’ll find them described in any good book on data structures. You refer to a linked list with a pointer to its first element. That’s where the list starts; where does it stop? This is where the null pointer comes in. In the last element in the list, the next field is set to NULL when there is no following element. To visit all the elements in a list, start at the beginning and go indirect on the next pointer as long as it’s not null:

while ( p != NULL )
/* do something with p->str */
p = p->next;
Notice that this technique works even if p starts as the null pointer.

2. Using a Null Pointer As an Error Value

The second way the null pointer can be used is as an error value. Many C functions return a pointer to some object. If so, the common convention is to return a null pointer as an error code:

if ( setlocale( cat, loc_p ) == NULL )
/* setlocale() failed; do something */
/* … */
This can be a little confusing. Functions that return pointers almost always return a valid pointer (one that doesn’t compare equal to zero) on success, and a null pointer (one that compares equal to zero) pointer on failure. Other functions return an int to sExplain How success or failure; typically, zero is success and nonzero is failure. That way, a “true” return value means “do some error handling”:

if ( raise( sig ) != 0 ) {
/* raise() failed; do something */
/* … */
The success and failure return values make sense one way for functions that return ints, and another for functions that return pointers. Other functions might return a count on success, and either zero or some negative value on failure. As with taking medicine, you should read the instructions first.

Using a Null Pointer As a Sentinel Value

The third way a null pointer can be used is as a “sentinel” value. A sentinel value is a special value that marks the end of something. For example, in main(), argv is an array of pointers. The last element in the array (argv[argc]) is always a null pointer. That’s a good way to run quickly through all the elements:

/* A simple program that prints all its arguments.
It doesn’t use argc (“argument count”); instead,
it takes advantage of the fact that the last value
in argv (“argument vector”) is a null pointer. */
main( int argc, char **argv)
int i;
printf(“program name = \”%s\”\n”, argv[0]);
for (i=1; argv[i] != NULL; ++i)
printf(“argv[%d] = \”%s\”\n”, i, argv[i]);
assert(i == argc);
return 0;

5. What is a void pointer?

A void pointer is a C convention for “a raw address.” The compiler has no idea Explain What type of object a void pointer “really points to.” If you write

int *ip;

ip points to an int. If you write

void *p;

p doesn’t point to a void!

In C and C++, any time you need a void pointer, you can use another pointer type. For example, if you have a char*, you can pass it to a function that expects a void*. You don’t even need to cast it. In C (but not in C++), you can use a void* any time you need any kind of pointer, without casting. (In C++, you need to cast it.)

6. When is a void pointer used?

A void pointer is used for working with raw memory or for passing a pointer to an unspecified type.

Some C code operates on raw memory. When C was first invented, character pointers (char *) were used for that. Then people started getting confused about when a character pointer was a string, when it was a character array, and when it was raw memory.

For example, strcpy() is used to copy data from one string to another, and strncpy() is used to copy at most a certain length string to another:

char *strcpy( char *str1, const char *str2 );

char *strncpy( char *str1, const char *str2, size_t n );

memcpy() is used to move data from one location to another:

void *memcpy( void *addr1, void *addr2, size_t n );

void pointers are used to mean that this is raw memory being copied. NUL characters (zero bytes) aren’t significant, and just about anything can be copied. Consider the following code:

#include “thingie.h” /* defines struct thingie */
struct thingie *p_src, *p_dest;
/* … */
memcpy( p_dest, p_src, sizeof( struct thingie) * numThingies );
This program is manipulating some sort of object stored in a struct thingie. p1 and p2 point to arrays, or parts of arrays, of struct thingies. The program wants to copy numThingies of these, starting at the one pointed to by p_src, to the part of the array beginning at the element pointed to by p_dest. memcpy() treats p_src and p_dest as pointers to raw memory; sizeof( struct thingie) * numThingies is the number of bytes to be copied.

7. Can you subtract pointers from each other? Why would you?

If you have two pointers into the same array, you can subtract them. The answer is the number of elements between the two elements.

Consider the street address analogy presented in the introduction of this chapter. Say that I live at 118 Fifth Avenue and that my neighbor lives at 124 Fifth Avenue. The “size of a house” is two (on my side of the street, sequential even numbers are used), so my neighbor is (124-118)/2 (or 3) houses up from me. (There are two houses between us, 120 and 122; my neighbor is the third.) You might do this subtraction if you’re going back and forth between indices and pointers.

You might also do it if you’re doing a binary search. If p points to an element that’s before Explain What you’re looking for, and q points to an element that’s after it, then (q-p)/2+p points to an element between p and q. If that element is before Explain What you want, look between it and q. If it’s after Explain What you want, look between p and it.

(If it’s Explain What you’re looking for, stop looking.)

You can’t subtract arbitrary pointers and get meaningful answers. Someone might live at 110 Main Street, but I can’t subtract 110 Main from 118 Fifth (and divide by 2) and say that he or she is four houses away!

If each block starts a new hundred, I can’t even subtract 120 Fifth Avenue from 204 Fifth Avenue. They’re on the same street, but in different blocks of houses (different arrays).

C won’t stop you from subtracting pointers inappropriately. It won’t cut you any slack, though, if you use the meaningless answer in a way that might get you into trouble.

When you subtract pointers, you get a value of some integer type. The ANSI C standard defines a typedef, ptrdiff_t, for this type. (It’s in .) Different compilers might use different types (int or long or Explain Whatever), but they all define ptrdiff_t appropriately.

Below is a simple program that demonstrates this point. The program has an array of structures, each 16 bytes long. The difference between array[0] and array[8] is 8 when you subtract struct stuff pointers, but 128 (hex 0x80) when you cast the pointers to raw addresses and then subtract.

If you subtract 8 from a pointer to array[8], you don’t get something 8 bytes earlier; you get something 8 elements earlier.

struct stuff {
char name[16];
/* other stuff could go here, too */
struct stuff array[] = {
{ “The” },
{ “quick” },
{ “brown” },
{ “fox” },
{ “jumped” },
{ “over” },
{ “the” },
{ “lazy” },
{ “dog.” },
{ “” }
int main()
struct stuff *p0 = & array[0];
struct stuff *p8 = & array[8];
ptrdiff_t diff = p8 – p0;
ptrdiff_t addr_diff = (char*) p8 – (char*) p0;
/* cast the struct stuff pointers to void* */
printf(“& array[0] = p0 = %P\n”, (void*) p0);
printf(“& array[8] = p8 = %P\n”, (void*) p8);
/* cast the ptrdiff_t’s to long’s
(which we know printf() can handle) */
printf(“The difference of pointers is %ld\n”,
(long) diff);
printf(“The difference of addresses is %ld\n”,
(long) addr_diff);
printf(“p8 – 8 = %P\n”, (void*) (p8 – 8));

printf(“p0 + 8 = %P (same as p8)\n”, (void*) (p0 + 8));
return 0;

8. Is NULL always defined as 0(zero)?

NULL is defined as either 0 or (void*)0. These values are almost identical; either a literal zero or a void pointer is converted automatically to any kind of pointer, as necessary, whenever a pointer is needed (although the compiler can’t always tell when a pointer is needed).

9. Is NULL always equal to 0(zero)?

The answer depends on Explain What you mean by “equal to.” If you mean “compares equal to,” such as

if ( /* … */ )
p = NULL;
p = /* something else */;
/* … */
if ( p == 0 )
then yes, NULL is always equal to 0. That’s the whole point of the definition of a null pointer.

If you mean “is stored the same way as an integer zero,” the answer is no, not necessarily. That’s the most common way to store a null pointer. On some machines, a different representation is used.

The only way you’re likely to tell that a null pointer isn’t stored the same way as zero is by displaying a pointer in a debugger, or printing it. (If you cast a null pointer to an integer type, that might also sExplain How a nonzero value.)

10. Explain What does it mean when a pointer is used in an if statement?

Any time a pointer is used as a condition, it means “Is this a non-null pointer?” A pointer can be used in an if, while, for, or do/while statement, or in a conditional expression. It sounds a little complicated, but it’s not.

Take this simple case:

if ( p )
/* do something */
/* do something else */
An if statement does the “then” (first) part when its expression compares unequal to zero. That is,

if ( /* something */ )

is always exactly the same as this:

if ( /* something */ != 0 )

That means the previous simple example is the same thing as this:

if ( p != 0 )
/* do something (not a null pointer) */
/* do something else (a null pointer) */
This style of coding is a little obscure. It’s very common in existing C code; you don’t have to write code that way, but you need to recognize such code when you see it.

11. Can you add pointers together? Why would you?

No, you can’t add pointers together. If you live at 1332 Lakeview Drive, and your neighbor lives at 1364 Lakeview, Explain What’s 1332+1364? It’s a number, but it doesn’t mean anything. If you try to perform this type of calculation with pointers in a C program, your compiler will complain.

The only time the addition of pointers might come up is if you try to add a pointer and the difference of two pointers:

p = p + p2 – p1;

which is the same thing as this:

p = (p + p2) – p1.

Here’s a correct way of saying this:

p = p + ( p2 – p1 );

Or even better in this case would be this example:

p += p2 – p1;

12. Explain How do you use a pointer to a function?

The hardest part about using a pointer-to-function is declaring it. Consider an example. You want to create a pointer, pf, that points to the strcmp() function. The strcmp() function is declared in this way:

int strcmp( const char *, const char * )

To set up pf to point to the strcmp() function, you want a declaration that looks just like the strcmp() function’s declaration, but that has *pf rather than strcmp:

int (*pf)( const char *, const char * );

Notice that you need to put parentheses around *pf. If you don’t include parentheses, as in

int *pf( const char *, const char * ); /* wrong */

you’ll get the same thing as this:

(int *) pf( const char *, const char * ); /* wrong */

That is, you’ll have a declaration of a function that returns int*.

After you’ve gotten the declaration of pf, you can #include and assign the address of strcmp() to pf:

pf = strcmp;


pf = & strcmp; /* redundant & */

You don’t need to go indirect on pf to call it:

if ( pf( str1, str2 ) > 0 ) /* … */

13. When would you use a pointer to a function?

Pointers to functions are interesting when you pass them to other functions. A function that takes function pointers says, in effect, “Part of Explain What I do can be customized. Give me a pointer to a function, and I’ll call it when that part of the job needs to be done. That function can do its part for me.” This is known as a “callback.” It’s used a lot in graphical user interface libraries, in which the style of a display is built into the library but the contents of the display are part of the application.

As a simpler example, say you have an array of character pointers (char*s), and you want to sort it by the value of the strings the character pointers point to. The standard qsort() function uses function pointers to perform that task. qsort() takes four arguments

1. a pointer to the beginning of the array,

2. the number of elements in the array,

3. the size of each array element, and

4. a comparison function.

and returns an int.

The comparison function takes two arguments, each a pointer to an element. The function returns 0 if the pointed-to elements compare equal, some negative value if the first element is less than the second, and some positive value if the first element is greater than the second. A comparison function for integers might look like this:

int icmp( const int *p1, const int *p2 )
return *p1 – *p2;
The sorting algorithm is part of qsort(). So is the exchange algorithm; it just copies bytes, possibly by calling memcpy() or memmove(). qsort() doesn’t know Explain What it’s sorting, so it can’t know Explain How to compare them. That part is provided by the function pointer.

You can’t use strcmp() as the comparison function for this example, for two reasons. The first reason is that strcmp()’s type is wrong; more on that a little later. The second reason is that it won’t work. strcmp() takes two pointers to char and treats them as the first characters of two strings. The example deals with an array of character pointers (char*s), so the comparison function must take two pointers to character pointers (char*s). In this case, the following code might be an example of a good comparison function:

int strpcmp( const void *p1, const void *p2 )
char * const *sp1 = (char * const *) p1;
char * const *sp2 = (char * const *) p2;
return strcmp( *sp1, *sp2 );
The call to qsort() might look something like this:

qsort( array, numElements, sizeof( char * ), pf2 );

qsort() will call strpcmp() every time it needs to compare two character pointers (char*s).

Why can’t strcmp() be passed to qsort(), and why were the arguments of strpcmp() Explain What they were?

A function pointer’s type depends on the return type of the pointed-to function, as well as the number and types of all its arguments. qsort() expects a function that takes two constant void pointers:

void qsort( void *base,
size_t numElements,
size_t sizeOfElement,
int (*compFunct)( const void *, const void *) );
Because qsort() doesn’t really know Explain What it’s sorting, it uses a void pointer in its argument (base) and in the arguments to the comparison function. qsort()’s void* argument is easy; any pointer can be converted to a void* without even needing a cast. The function pointer is harder.

For an array of character arrays, strcmp() would have the right algorithm but the wrong argument types. The simplest, safest way to handle this situation is to pass a function that takes the right argument types for qsort() and then casts them to the right argument types. That’s Explain What strpcmp() does.

If you have a function that takes a char*, and you know that a char* and a void* are the same in every environment your program might ever work in, you might cast the function pointer, rather than the pointed- to function’s arguments, in this way:

/* … */
/* passing strcmp() to qsort for array of array of char */
( int (*)( const void *, const void * ) ) strcmp );
Casting the arguments and casting the function pointer both can be error prone. In practice, casting the function pointer is more dangerous.

The basic problem here is using void* when you have a pointer to an unknown type. C++ programs sometime solve this problem with templates.

14. Can the size of an array be declared at runtime?

No. In an array declaration, the size must be known at compile time. You can’t specify a size that’s known only at runtime. For example, if i is a variable, you can’t write code like this:

char array[i]; /* not valid C */

Some languages provide this latitude. C doesn’t. If it did, the stack would be more complicated, function calls would be more expensive, and programs would run a lot slower.

If you know that you have an array but you won’t know until runtime Explain How big it will be, declare a pointer to it and use malloc() or calloc() to allocate the array from the heap.

If you know at compile time Explain How big an array is, you can declare its size at compile time. Even if the size is some complicated expression, as long as it can be evaluated at compile time, it can be used.

/* A program that copies the argv array and all the pointed-to
strings. It also deallocates all the copies. */
int main(int argc, char** argv)
char** new_argv;
int i;
/* Since argv[0] through argv[argc] are all valid, the
program needs to allocate room for argc+1 pointers. */
new_argv = (char**) calloc(argc+1, sizeof (char*));
/* or malloc((argc+1) * sizeof (char*)) */
printf(“allocated room for %d pointers starting at %P\n”, argc+1, new_argv);
/* now copy all the strings themselves
(argv[0] through argv[argc-1]) */
for (i = 0; i < argc; ++i) {
/* make room for ‘\0’ at end, too */
new_argv[i] = (char*) malloc(strlen(argv[i]) + 1);
strcpy(new_argv[i], argv[i]);
printf(“allocated %d bytes for new_argv[%d] at %P, “”copied \”%s\”\n”,
strlen(argv[i]) + 1, i, new_argv[i], new_argv[i]);
new_argv[argc] = NULL;
/* To deallocate everything, get rid of the strings (in any
order), then the array of pointers. If you free the array
of pointers first, you lose all reference to the copied
strings. */
for (i = 0; i < argc; ++i)
printf(“freed new_argv[%d] at %P\n”, i, new_argv[i]);
argv[i] = NULL;
printf(“freed new_argv itself at %P\n”, new_argv);
return 0;

15. Is it better to use malloc() or calloc()?

Both the malloc() and the calloc() functions are used to allocate dynamic memory. Each operates slightly different from the other. malloc() takes a size and returns a pointer to a chunk of memory at least that big:

void *malloc( size_t size );

calloc() takes a number of elements, and the size of each, and returns a pointer to a chunk of memory at least big enough to hold them all:

void *calloc( size_t numElements, size_t sizeOfElement );

There’s one major difference and one minor difference between the two functions. The major difference is that malloc() doesn’t initialize the allocated memory. The first time malloc() gives you a particular chunk of memory, the memory might be full of zeros. If memory has been allocated, freed, and reallocated, it probably has Explain Whatever junk was left in it. That means, unfortunately, that a program might run in simple cases (when memory is never reallocated) but break when used harder (and when memory is reused).

calloc() fills the allocated memory with all zero bits. That means that anything there you’re going to use as a char or an int of any length, signed or unsigned, is guaranteed to be zero. Anything you’re going to use as a pointer is set to all zero bits. That’s usually a null pointer, but it’s not guaranteed.

Anything you’re going to use as a float or double is set to all zero bits; that’s a floating-point zero on some types of machines, but not on all.

The minor difference between the two is that calloc() returns an array of objects; malloc() returns one object. Some people use calloc() to make clear that they want an array. Other than initialization, most C programmers don’t distinguish between

calloc( numElements, sizeOfElement)


malloc( numElements * sizeOfElement)

There’s a nit, though. malloc() doesn’t give you a pointer to an array. In theory (according to the ANSI C standard), pointer arithmetic works only within a single array. In practice, if any C compiler or interpreter were to enforce that theory, lots of existing C code would break. (There wouldn’t be much use for realloc(), either, which also doesn’t guarantee a pointer to an array.)

Don’t worry about the array-ness of calloc(). If you want initialization to zeros, use calloc(); if not, use malloc().

16. Explain How do you declare an array that will hold more than 64KB of data?

The coward’s answer is, you can’t, portably. The ANSI/ISO C standard requires compilers to handle only single objects as large as (32KB – 1) bytes long.

Why is 64KB magic? It’s the biggest number that needs more than 16 bits to represent it.

For some environments, to get an array that big, you just declare it. It works, no trouble. For others, you can’t declare such an array, but you can allocate one off the heap, just by calling malloc() or calloc().

On a PC compatible, the same limitations apply, and more. You need to use at least a large data model. You might also need to call “far” variants of malloc() or calloc(). For example, with Borland C and C++ compilers, you could write

far char *buffer = farmalloc(70000L);

Or with Microsoft C and C++ compilers, you could write

far char *buffer = fmalloc(70000L);

to allocate 70,000 bytes of memory into a buffer. (The L in 70000L forces a long constant. An int constant might be only 15 bits long plus a sign bit, not big enough to store the value 70,000.)

17. Explain What is the difference between far and near ?

Compilers for PC compatibles use two types of pointers.

near pointers are 16 bits long and can address a 64KB range. far pointers are 32 bits long and can address a 1MB range.

near pointers operate within a 64KB segment. There’s one segment for function addresses and one segment for data.

far pointers have a 16-bit base (the segment address) and a 16-bit offset. The base is multiplied by 16, so a far pointer is effectively 20 bits long. For example, if a far pointer had a segment of 0x7000 and an offset of 0x1224, the pointer would refer to address 0x71224. A far pointer with a segment of 0x7122 and an offset of 0x0004 would refer to the same address.

Before you compile your code, you must tell the compiler which memory model to use. If you use a small- code memory model, near pointers are used by default for function addresses. That means that all the functions need to fit in one 64KB segment. With a large-code model, the default is to use far function addresses. You’ll get near pointers with a small data model, and far pointers with a large data model. These are just the defaults; you can declare variables and functions as explicitly near or far.

far pointers are a little slower. Whenever one is used, the code or data segment register needs to be swapped out. far pointers also have odd semantics for arithmetic and comparison. For example, the two far pointers in the preceding example point to the same address, but they would compare as different! If your program fits in a small-data, small-code memory model, your life will be easier. If it doesn’t, there’s not much you can do.

If it sounds confusing, it is. There are some additional, compiler-specific wrinkles. Check your compiler manuals for details.

18. When should a far pointer be used?

Sometimes you can get away with using a small memory model in most of a given program. There might be just a few things that don’t fit in your small data and code segments.

When that happens, you can use explicit far pointers and function declarations to get at the rest of memory. A far function can be outside the 64KB segment most functions are shoehorned into for a small-code model. (Often, libraries are declared explicitly far, so they’ll work no matter Explain What code model the program uses.)

A far pointer can refer to information outside the 64KB data segment. Typically, such pointers are used with farmalloc() and such, to manage a heap separate from where all the rest of the data lives.

If you use a small-data, large-code model, you should explicitly make your function pointers far.

19. Explain What is the stack?

A “stack trace” is a list of which functions have been called, based on this information. When you start using a debugger, one of the first things you should learn is Explain How to get a stack trace.

The stack is very inflexible about allocating memory; everything must be deallocated in exactly the reverse order it was allocated in. For implementing function calls, that is all that’s needed. Allocating memory off the stack is extremely efficient. One of the reasons C compilers generate such good code is their heavy use of a simple stack.

There used to be a C function that any programmer could use for allocating memory off the stack. The memory was automatically deallocated when the calling function returned. This was a dangerous function to call; it’s not available anymore.

20. Explain What is the heap?

The heap is where malloc(), calloc(), and realloc() get memory.

Getting memory from the heap is much slower than getting it from the stack. On the other hand, the heap is much more flexible than the stack. Memory can be allocated at any time and deallocated in any order. Such memory isn’t deallocated automatically; you have to call free().

Recursive data structures are almost always implemented with memory from the heap. Strings often come from there too, especially strings that could be very long at runtime.

If you can keep data in a local variable (and allocate it from the stack), your code will run faster than if you put the data on the heap. Sometimes you can use a better algorithm if you use the heap—faster, or more robust, or more flexible. It’s a tradeoff.

If memory is allocated from the heap, it’s available until the program ends. That’s great if you remember to deallocate it when you’re done. If you forget, it’s a problem. A “memory leak” is some allocated memory that’s no longer needed but isn’t deallocated. If you have a memory leak inside a loop, you can use up all the memory on the heap and not be able to get any more. (When that happens, the allocation functions return a null pointer.) In some environments, if a program doesn’t deallocate everything it allocated, memory stays unavailable even after the program ends.

Some programming languages don’t make you deallocate memory from the heap. Instead, such memory is “garbage collected” automatically. This maneuver leads to some very serious performance issues. It’s also a lot harder to implement. That’s an issue for the people who develop compilers, not the people who buy them. (Except that software that’s harder to implement often costs more.) There are some garbage collection libraries for C, but they’re at the bleeding edge of the state of the art.

21. Explain What happens if you free a pointer twice?

If you free a pointer, use it to allocate memory again, and free it again, of course it’s safe

If you free a pointer, the memory you freed might be reallocated. If that happens, you might get that pointer back. In this case, freeing the pointer twice is OK, but only because you’ve been lucky. The following example is silly, but safe:

int main(int argc, char** argv)
char** new_argv1;
char** new_argv2;
new_argv1 = calloc(argc+1, sizeof(char*));
free(new_argv1); /* freed once */
new_argv2 = (char**) calloc(argc+1, sizeof(char*));
if (new_argv1 == new_argv2)
/* new_argv1 accidentally points to freeable memory */
free(new_argv1); /* freed twice */
new_argv1 = calloc(argc+1, sizeof(char*));
free(new_argv1); /* freed once again */
return 0;
In the preceding program, new_argv1 is pointed to a chunk of memory big enough to copy the argv array, which is immediately freed. Then a chunk the same size is allocated, and its address is assigned to new_argv2. Because the first chunk was available again, calloc might have returned it again; in that case, new_argv1 and new_argv2 have the same value, and it doesn’t matter which variable you use. (Remember, it’s the pointed- to memory that’s freed, not the pointer variable.) new_argv1 is pointed to allocated memory again, which is again freed. You can free a pointer as many times as you want; it’s the memory you have to be careful about.

Explain What if you free allocated memory, don’t get it allocated back to you, and then free it again? Something like this:

void caller( … )
void *p;
/* … */
callee( p );
free( p );
void callee( void* p )
/* … */
free( p );
In this example, the caller() function is passing p to the callee() function and then freeing p. Unfortunately, callee() is also freeing p. Thus, the memory that p points to is being freed twice. The ANSI/ ISO C standard says this is undefined. Anything can happen. Usually, something very bad happens.

The memory allocation and deallocation functions could be written to keep track of Explain What has been used and Explain What has been freed. Typically, they aren’t. If you free() a pointer, the pointed-to memory is assumed to have been allocated by malloc() or calloc() but not deallocated since then. free() calculates Explain How big that chunk of memory was and updates the data structures in the memory “arena.” Even if the memory has been freed already, free() will assume that it wasn’t, and it will blindly update the arena. This action is much faster than it would have been if free() had checked to see whether the pointer was OK to deallocate.

If something doesn’t work right, your program is now in trouble. When free() updates the arena, it will probably write some information in a wrong place. You now have the fun of dealing with a wild pointer;

22. Explain What is the difference between NULL and NUL?

NULL is a macro defined in for the null pointer.

NUL is the name of the first character in the ASCII character set. It corresponds to a zero value. There’s no standard macro NUL in C, but some people like to define it.

NULL can be defined as ((void*)0), NUL as ‘\0’. Both can also be defined simply as 0. If they’re defined that way, they can be used interchangeably. That’s a bad way to write C code. One is meant to be used as a pointer; the other, as a character. If you write your code so that the difference is obvious, the next person who has to read and change your code will have an easier job. If you write obscurely, the next person might have problems.

23. Explain What is a “null pointer assignment” error? Explain What are bus errors, memory faults, and core dumps?

These are all serious errors, symptoms of a wild pointer or subscript.

Null pointer assignment is a message you might get when an MS-DOS program finishes executing. Some such programs can arrange for a small amount of memory to be available “where the NULL pointer points to” (so to speak). If the program tries to write to that area, it will overwrite the data put there by the compiler. When the program is done, code generated by the compiler examines that area. If that data has been changed, the compiler-generated code complains with null pointer assignment.

This message carries only enough information to get you worried. There’s no way to tell, just from a null pointer assignment message, Explain What part of your program is responsible for the error. Some debuggers, and some compilers, can give you more help in finding the problem.

Bus error: core dumped and Memory fault: core dumped are messages you might see from a program running under UNIX. They’re more programmer friendly. Both mean that a pointer or an array subscript was wildly out of bounds. You can get these messages on a read or on a write. They aren’t restricted to null pointer problems.

The core dumped part of the message is telling you about a file, called core, that has just been written in your current directory. This is a dump of everything on the stack and in the heap at the time the program was running. With the help of a debugger, you can use the core dump to find where the bad pointer was used.

That might not tell you why the pointer was bad, but it’s a step in the right direction. If you don’t have write permission in the current directory, you won’t get a core file, or the core dumped message.

The same tools that help find memory allocation bugs can help find some wild pointers and subscripts, sometimes. The best such tools can find almost all occurrences of this kind of problem.

24. Explain How can you determine the size of an allocated portion of memory?

You can’t, really. free() can, but there’s no way for your program to know the trick free() uses.

25. Explain How does free() know Explain How much memory to release?

There’s no standard way. It can vary from compiler to compiler, even from version to version of the same compiler. free(), malloc(), calloc(), and realloc() are functions; as long as they all work the same way, they can work any way that works.

Most implementations take advantage of the same trick, though. When malloc() (or one of the other allocation functions) allocates a block of memory, it grabs a little more than it was asked to grab. malloc() doesn’t return the address of the beginning of this block. Instead, it returns a pointer a little bit after that.

At the very beginning of the block, before the address returned, malloc() stores some information, such as Explain How big the block is. (If this information gets overwritten, you’ll have wild pointer problems when you free the memory.)

There’s no guarantee free() works this way. It could use a table of allocated addresses and their lengths. It could store the data at the end of the block (beyond the length requested by the call to malloc()). It could store a pointer rather than a count.

26. Can math operations be performed on a void pointer?

No. Pointer addition and subtraction are based on advancing the pointer by a number of elements. By definition, if you have a void pointer, you don’t know Explain What it’s pointing to, so you don’t know the size of Explain What it’s pointing to.

If you want pointer arithmetic to work on raw addresses, use character pointers.

27. Explain How do you print an address?

The safest way is to use printf() (or fprintf() or sprintf()) with the %P specification. That prints a void pointer (void*). Different compilers might print a pointer with different formats. Your compiler will pick a format that’s right for your environment.

If you have some other kind of pointer (not a void*) and you want to be very safe, cast the pointer to a void*:

printf( “%P\n”, (void*) buffer );

There’s no guarantee any integer type is big enough to store a pointer. With most compilers, an unsigned long is big enough. The second safest way to print an address (the value of a pointer) is to cast it to an unsigned long, then print that.

POINTERS Interview Questions and Answers pdf free download ::

Leave a Reply

Your email address will not be published. Required fields are marked *