250+ TOP MCQs on Guidelines for Testability -2 and Answers

VLSI Quiz focuses on “Guidelines for Testability -2”.

1. _______ is used to start the initial sequence correctly.
A. preset
B. clear
C. preset and clear
D. clock
Answer: C
Clarification: The sequential logic testing arises at power-up time. To solve this problem and to start the initial sequence correctly, preset and clear are used.

2. Preset and clear is used to
A. initialize only first sequence
B. correct first two sequences
C. correct first and last sequence
D. correct alternative sequences
Answer: A
Clarification: Preset and clear is used to initialize only the first sequence as these are very space consuming.

3. How can over-riding the normal initialization state be achieved?
A. by adding preset
B. by adding reset
C. by adding gating in initialize control line
D. by adding sourcing in initialize control line
Answer: C
Clarification: The tester should be able to over-ride the normal initialization state of the logic and this can be achieved by the addition of gating in initialize control line.

4. Asynchronous logic is driven by
A. clock
B. gating circuit
C. self-clock
D. self timing
Answer: D
Clarification: Asynchronous logic is driven by self-timing state transition in response to changes of the primary input.

5. Which is better in terms of memory storage?
A. synchronous circuits
B. asynchronous circuits
C. sequential circuits
D. clocked circuits
Answer: A
Clarification: Synchronous circuits are better when compared to memory storage. Asynchronous circuits have a timing problems and also memory effects and problems.

  250+ TOP MCQs on Gallium Arsenide VLSI and Answers

6. Which circuits are faster?
A. synchronous circuits
B. asynchronous circuits
C. sequential circuits
D. clocked circuits
Answer: B
Clarification: Asynchronous circuits are inherently faster than clocked logic but it has other disadvantages like difficult testing, non deterministic behaviour, prones to races, etc.

7. Which is more sensitive logic?
A. synchronous circuits
B. asynchronous circuits
C. sequential circuits
D. clocked circuits
Answer: B
Clarification: Asynchronous circuits are more sensitive to tester skews and it is also prone to races and other hazards.

8. Which logic are difficult to design?
A. synchronous circuits
B. asynchronous circuits
C. sequential circuits
D. clocked circuits
Answer: B
Clarification: Asynchronous circuit designs are difficult than synchronous logic and must be approached with care, taking the account of critical race and other hazard-generating conditions.

9. Automatic test pattern generators depend on
A. map design
B. layout design
C. logic domain
D. testing domain
Answer: C
Clarification: Automatic test pattern generators work in logic domain and view delay-dependent logic as redundant combinational logic.

10. When a clock signal is gated with another signal like load signal, output is not affected.
A. true
B. false
Answer: B
Clarification: When a clock signal is gated with another signal such as load signal, then any skew on that signal can cause the erroneous output from associated logic.

f VLSI for Quizzes,

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top