Engineering Geology Multiple Choice Questions on “Geological Investigations”.
1. Selection of excavation method depends on __________
a) Type of rocks
b) Nature of rocks and ground
c) Texture of rocks and ground
d) Weather conditions of the place
Answer: b
Clarification: Choice of the right method will, therefore, be possible only when the nature of the rocks and the ground all along the alignment is fully known. This is one of the most important aim and objects of geological investigations.
2. Which outline is preferred for weak rocks with unequal lateral pressure?
a) D-shaped
b) Horse-shoe shaped
c) Circular
d) Rectangular shaped
Answer: c
Clarification: In self-supporting and strong rocks, either, D-shape or horse-shoe shape may be conveniently adopted but these shapes would be practically unsuitable in soft ground or even in weak rocks with unequal lateral pressure. In those cases, circular outline may be the first choice.
3. Lithology does not affect which parameter?
a) Type of tunnel
b) Method of tunnelling
c) Strength and extent of lining
d) Cost of the project
Answer: a
Clarification: Information regarding mineralogical composition, textures and structures of the rocks through which the proposed tunnel is to pass is of great importance in deciding: the method of tunnelling, the strength and extent of lining and, thus the cost of the project.
4. What occurs due to falling of big rock blocks or sides due to release of stresses during tunnelling?
a) Rock fall
b) Rock bursts
c) Blockage
d) Water rush
Answer: b
Clarification: Rock bursts that occur due to falling of big rock blocks from roofs or sides due to the release of stresses or falling of rock block along fractures already existing in these rocks often cause many accidents.
5. Pick the rock considered as soft rocks for tunnelling.
a) Granite
b) Gabbro
c) Basalt
d) Shale
Answer: d
Clarification: Rocks considered as hard and crystalline are granites, syenites, gabbros, basalts and all the related igneous rocks, sandstones, limestones, dolomites, quartzites etc. However the soft rocks include shales, friable and poorly compacted sandstones, chalk and porous varieties of limestones and dolomites, slates and phyllites with high degree of cleavage.
6. Which type of rocks requires double lining, i.e., temporary and permanent lining?
a) Hard rocks
b) Crystalline rocks
c) Soft rocks
d) Non-crystalline rocks
Answer: c
Clarification: In most cases, the soft rocks are not self-supporting. Hence, temporary and permanent lining becomes necessary that would involve extra cost and additional time.
7. Which type of strata is rare in occurrence?
a) Vertical strata
b) Horizontal strata
c) Inclined strata
d) Jointed strata
Answer: b
Clarification: Horizontal strata are rare in occurrence for longer tunnels. If they are countered for small tunnels or short lengths of long tunnels, horizontally layered rocks might be considered quite favourable.
8. Layers dipping at angles up to 45° may be called __________
a) Moderately inclined strata
b) Steeply inclined strata
c) Half inclined strata
d) Semi-inclined strata
