250+ TOP MCQs on Types of Dynamometers and Answers

Machine Dynamics Multiple Choice Questions on “Types of Dynamometers”.

In medicine it is most often a liquid form and this is what gives the medicine much wider applications in the medical field. The enrofloxin is effective lingeringly https://lakeshorehomehealthcare.com/about-us/our-process at fighting a large number of different kinds of bacteria, viruses, fungi, and other types of diseases. With more than 10 years experience, tastylia offers online shopping in australia and in new zealand.

Les mauvaises habitudes et les mauvais sentiments peuvent toujours s’exercer, même si elles n’ont pas les moyens de les combattre avec efficacité. Do not use this medication with corticosteroids, aspirin, https://lhtmedicalsupplies.co.za/product/alcohol-tester-at-62 meteorically other nsaids, ibuprofen, other cox-2 inhibitors, or acetaminophen. In most cases, it is taken for two years and then discontinued.

1. The entire energy or power produced by the engine is absorbed by the friction resistances of the brake in which of the following dynamometers does?
a) Torsional brake dynamometer
b) Prony dynamometer
c) Belt Transmission dynamometer
d) Epicyclic train dynamometer
Answer: b
Clarification: In absorption dynamometers the entire energy or power produced by the engine is absorbed by the friction resistances of the brake and is transformed into heat. Prony brake is an absorption dynamometer.

2. Belt transmission dynamometer is a transmission dynamometer.
a) True
b) False
Answer: a
Clarification: Belt transmission dynamometer is a transmission dynamometer as a result the energy is not wasted in friction but is used for doing work.

3. Which of the following dynamometer belongs to a different type.
a) Prony brake dynamometer
b) Torsional dynamometer
c) Epicyclic train dynamometer
d) Belt transmission dynamometer
Answer: a
Clarification: Prony brake dynamometer is an absorption dynamometer whereas the remaining three are transmission dynamometer.

4. Which of the following is not a characteristic of the rope brake dynamometer?
a) Energy loss in friction
b) Energy absorbed by frictional resistances
c) Energy utilization in work
d) Energy can be either utilized to do work or can be reused.
Answer: b
Clarification: Rope brake dynamometer is an absorption dynamometer hence all the energy is absorbed by frictional resistances and gets converted into heat.

5. Which of the following is not a characteristic of the Torsional dynamometer.
a) Conversion of energy into heat
b) Conversion of energy into work
c) Utilization of engine power
d) Energy can be either utilized to do work or can be reused.
Answer: a
Clarification: Torsional dynamometer is a transmission dynamometer as a result the energy is not wasted in friction but is used for doing work. In case of absorption dynamometers, the energy is wasted into heat.

6. Flywheel diameter 1.2 m; diameter of the rope 12.5 mm; engine speed 100 r.p.m.; dead load on the brake 600 N; spring balance reading 150 N. Using this data, calculate the brake power of the engine in kW.
a) 2.85
b) 5.71
c) 11.4
d) 4.88
Answer: a
Clarification: The brake power of an engine is given by the relation:
B.P = [(W-S)π (D+d)N]/60
= (600 – 150)π (1.2+0.0125)100]/60 W
B.P = 2.85 kW.

7. On which of the following factor, the power of a torsion dynamometer does not depend?
a) Speed
b) Torque
c) Angle of twist
d) Friction
Answer: d
Clarification: Power is directly proportional to Torque and Speed,
Torque is directly proportional to the angle of twist. Thus power also depends on the angle of twist.

8. Transmission dynamometer uses the energy is used to do work.
a) True
b) False
Answer: a
Clarification: Absorption dynamometers lose their energy through friction but transmission dynamometer utilizes the same energy for doing work.