Manufacturing Engineering Multiple Choice Questions on “Mechanical Testing”.
1. Hounsfield tensometer can be used to perform __________
a) Tensile test
b) Compressive test
c) Hardness test
d) Toughness test
Answer: a
Clarification: Hounsfield tensometer, Universal testing machine, Instron and MTS (materials testing system) are the common machine that are used to for tensile test. Hounsfield tensometer is a small machine and widely used for tensile test in research laboratories.
2. ASTM stands for __________
a) American Society for Tensile Measurement
b) American Society for Testing and Materials
c) American Society for Tool Measurement
d) American Society for Tensile Material
Answer: b
Clarification: ASTM stands for American Society for Testing and Materials. ASTM develops technical standards for a wide range of materials products. American Society for Tensile Measurement are used to decide various standard in tensile measurement.
3. According to ASTM standard, which of the following relation is correct about gauge length of cross section area ‘A’?
a) L = 2.51(sqrt{A})
b) L = 4.51(sqrt{A})
c) L = 2(sqrt{A})
d) L = 3.51(sqrt{A})
Answer: b
Clarification: According to ASTM standard, gauge length = 4.51(sqrt{A}).
4. According to BS standard, which of the following relation is correct about gauge length of cross section area ‘A’?
a) L = 2.51(sqrt{A})
b) L = 4.51(sqrt{A})
c) L = 4(sqrt{A})
d) L = 3.51(sqrt{A})
Answer: c
Clarification: According to BS standard, gauge length = 4(sqrt{A}), where A denotes the cross section area of specimen used under testing.
5. According to DIN standard, which of the following relation is correct about gauge length of cross section area ‘A’?
a) L = 12.51(sqrt{A})
b) L = 14.51(sqrt{A})
c) L = 4(sqrt{A})
d) L = 11.2(sqrt{A})
Answer: d
Clarification: According to DIN standard, gauge length=11.2(sqrt{A}), where A denotes the cross section area of specimen used under testing.
6. Mohs hardness test has a scale range of _________
a) 1 to 10
b) 100 to 200
c) 1 to 1000
d) 1 to 3000
Answer: a
Clarification: Mohs hardness scale was developed by “Frederich Mohs” in 1822, which is a chart that denotes relative hardness of the various materials (1-softest to 10-hardenst). According to Mohs scale, diamond is the hardest material and talc is the softest material.
7. Brinell hardness test has a scale range of _________
a) 0 to 10
b) 100 to 200
c) 0 to 1000
d) 0 to 3000
Answer: d
Clarification: Brinell hardness test has a scale range of 0 to 3000. Brinell hardness number of soft irons is ranges from 67 to 500.
8. Rockwell hardness test has a scale range of _________
a) 0 to 10
b) 100 to 200
c) 0 to 1000
d) 0 to 3000
Answer: c
Clarification: Rockwell hardness test has a scale range of 0 to 1000. It is used to measure the hardness of a specimen.
9. Vickers hardness test has a scale range of _____________
a) 0 to 10
b) 100 to 200
c) 0 to 1000
d) 0 to 3000
Answer: d
Clarification: Vickers hardness test has a scale range of 0 to 3000. It is used to measure the hardness of a specimen.
10. Brinell Hardness Number (BHN) for soft iron is between _____________
a) 1000-2000
b) 227-857
c) 67-500
d) 0-10
Answer: c
Clarification: Brinell hardness number (BHN) of soft iron ranges from 67 to 500.