Software Defined Radio Multiple Choice Questions & Answers (MCQs) on “ADC Tradeoffs – 1”.
1. Which of the following is the first step in establishing acceptable aliasing power?
a) Establish the relation between CIR and BER
b) Fix BER threshold
c) Convert BER threshold to CIR threshold
d) Apply the instantaneous dynamic range requirement of ADC
Answer: b
Clarification: The first step in establishing acceptable aliasing power is to fix the BER threshold based on QOS requirements of the waveform. The second step is to establish a relationship between CIR and BER. Then the BER threshold is converted to CIR threshold. The fourth and the final step is to apply the instantaneous dynamic range requirement of ADC.
2. Noise must be less than _____ of the ADC.
a) half of the LSB
b) LSB
c) half of the MSB
d) MSB
Answer: a
Clarification: The effect of aliasing, spurious response in IF/RF processing and other noise must be less than half of the least significant bit of the ADC. If this condition is satisfied, then all the bits of ADC give only the useful signal power.
3. To avoid aliasing, the wideband ADC is ____ by anti-aliasing filters to suitably alter the _____ waveform.
a) succeeded, digital
b) preceded, digital
c) succeeded, analog
d) preceded, analog
Answer: d
Clarification: Aliasing prevents faithful restoration of the signal. To avoid aliasing, the wideband ADC is preceded by anti-aliasing filters to suitably alter the analog waveform. The filters must have satisfactory stop-band attenuation.
4. The shape factor of an anti-aliasing filter is given by the ratio of the frequency at ___ dB attenuation point to the frequency at ___ dB point.
a) 80, 3
b) 3, 80
c) -80, -3
d) -3, -80
Answer: c
Clarification: Anti -aliasing filters require large shape factor for suppression of signals closer to the upper band-edge of ADC passband. The shape factor of an anti-aliasing filter is given by the ratio of the frequency at -80 dB attenuation point to the frequency at -3 dB point.
5. Which among the following filters has the slowest roll-off?
a) Cauer
b) Chebychev
c) Butterworth
d) Bessel
Answer: d
Clarification: Bessel function has the slowest roll-off factor among the four filters. The approximate value of shape factor is 6. It is a monotonic filter.
6. Which of the following expressions give the relation between power and quantization step size (q)?
a) p=q2/2R
b) p=q/2R
c) p=q2/R
d) p=q2*2R
Answer: a
Clarification: p=q2/2R is the relation between power and quantization step size. R is the input resistance.
7. Which of the following expressions give the SNR at the output of ADC?
a) SNR=6.02*B+1.76+10log(fs/2fmax)
b) SNR=6.02*B+1.76+10log(2fmax/fs)
c) SNR=12.04*B+1.76+10log(2fmax/fs)
d) SNR=6.02*B+1.76
Answer: a
Clarification: SNR=6.02*B+1.76+10log(fs/2fmax) is the expression for SNR at the output of ADC. B is the number of bits. fs is the sampling frequency. fmax is the maximum frequency component of the signal.
8. In non-monotonic filters, attenuation increases with frequency.
a) True
b) False
Answer: b
Clarification: In monotonic filters, attenuation increases with frequency. Non-monotonic filter has less attenuation. It allows energy beyond the passband and exhibits phase distortion.
9. Which of the following is untrue about Sigma-Delta ADC?
a) fs>2fmax
b) Zero crossing detector consists of a sample and hold circuit
c) Aperture jitter is minimized due to integration
d) The integrating filter is preceded by a zero crossing detector
