250+ TOP MCQs on Market Forms and Uses of Steel and Answers

Basic Civil Engineering Quiz on “Market Forms and Uses of Steel”.

1. The carbon content of steel is:
a) Less than 0.15%
b) 2% – 4%
c) 0.08%
d) 0.002% – 2.1%
Answer: d
Clarification: Cast iron contains 2-4% of carbon, wrought iron contains less than 0.15% of carbon and stainless steel contains maximum 0.08% carbon.

2. When carbon contents less than 0.1%, steel is called:
a) Mild steel
b) Medium carbon steel
c) Dead steel
d) Hard steel
Answer: c
Clarification: Mild steel contains carbon up to 0.25%. Medium carbon steel has 0.25%-0.7% carbon. Hard steel has 0.7-1.5%.

3. Very low carbon steel is used for:
a) Wires
b) Wire nails
c) Screw drivers
d) Rods
Answer: b
Clarification: Since it has very low carbon contents, that is 0.05-0.1% it can be used for low strength works.

4. What property does steel impart to an R.C.C. structure?
a) Compression and tension
b) Tension
c) Shear
d) Compression
Answer: a
Clarification: Concrete and steel are primarily used in R.C.C – reinforced cement concrete. Concrete is strong in compression and weak in tension. Steel is strong in both properties and hence provides strength to the structure.

5. Which of the below is not an ISI classified channel section?
Answer: c
Clarification: ISLC stands for Indian Standards Light Channel. Similarly, there are Junior (J), Medium (M) and Special (S) Channels. There is no heavy (H) Channel.

6. What is the full form of TMT bars?
a) Thermo Modified Treated
b) Thermo Mechanically Treated
c) Thermal Mechanic Twisted
d) Thermo Mechanically Twisted
Answer: b
Clarification: TMT bars are produced by sudden quenching of red hot steel bars by spraying water. Hence it is called Thermo Mechanically Treated bar.

7. Corrugated sheets are also referred to as:
a) CS Sheets
b) CI Sheets
c) GC Sheets
d) GI Sheets
Answer: d
Clarification: The corrugated sheets are galvanized to add a protective coating to the steel sheet. Hence, GI-Galvanized Iron sheet is another name for corrugated sheets.

8. Flat iron bars are used generally for:
a) R.C.C
b) Grill work
c) Roofing
d) Truss
Answer: b
Clarification: These are available in varying widths ranging from 10mm-400mm and thickness from 3mm-40mm. These are widely used in the construction of steel grill work for windows and gates.

9. Which of the below is not a disadvantage of using ribbed-torsteel bars?
a) High labour charge
b) Not easily identifiable
c) Weaker than plain round steel
d) Arc welding is not possible
Answer: a
Clarification: These bars are produced from ribbed-torsteel which is a deformed high strength steel. These bars have projections (ribs) on their surface. The bending, fixing and handling of these bars are simplified and it results in less labour charge.

10. Steel plates are rarely used for:
a) Connecting steel beams for extension
b) Serving as tension members in the truss
c) Forming built up sections of steel
d) Providing support in R.C.C structures
Answer: d
Clarification: Steel bars and rods are used widely in R.C.C structures. Steel plates find application in structural steel works.

Basic Civil Engineering for Quizzes, .