Cognitive Radio Multiple Choice Questions & Answers (MCQs) on “Next Generation Wireless Network – Cross Layer Design – 1”.
1. Which among the following is a disadvantage of the signaling pipe?
a) Lack of instant signaling
b) Separate headers for non-adjacent layers
c) Unreliable delivery of information
d) Generation of interface between non-adjacent layers
Answer: a
Clarification: Interlayer signaling allows signaling information to pass from layer to layer along with packet flow. The processing path in the protocol stack may pass from top to bottom or from bottom to top. This is not suitable for cross-layer implementation since it requires instant signaling.
2. What is the full form of CLASS approach?
a) Cross-Layer Skipping Shortcuts
b) Cross-Layer Super Shortcuts
c) Cross-layer Support Shortcuts
d) Cross-Layer Signalling Shortcuts
Answer: d
Clarification: Direct Interlayer Communication provides shortcuts between layers that are performed out of the band. Cross-Layer Signalling Shortcuts support the exchange of messages between non-adjacent layers eliminating the need for processing at each layer.
3. Which among the following is false about the CLASS approach?
a) Eliminates insertion of signaling information
b) Supports only unidirectional communication
c) Reduce overhead
d) Eliminate interception of packet at non-destination layer
Answer: b
Clarification: CLASS eliminates interception of packet at non-destination layer, reduces processing overhead, eliminates insertion of signaling information, and supports bidirectional communication. Signaling message typically includes the Internet Control Message Protocol.
4. Which among the following is implemented parallel to the protocol stack?
a) Interlayer signaling pipe
b) Direct inter layer communication
c) Central cross-layer plane
d) Cross talk
Answer: c
Clarification: The Central cross-layer plane is the most popularly used implementation of cross-layer design concept. It can be implemented as a shared database. Otherwise, each protocol layer creates separate interfaces for its internal protocol parameters and functions.
5. Which among the following is not a disadvantage ICMP protocol for direct inter layer communication?
a) IP headers are included
b) High protocol processing overhead
c) Limited to request-respond action
d) Loss of message packet cannot be identified
Answer: d
Clarification: ICMP protocol has a large protocol header and protocol processing overhead. It is limited to request-response actions. However, cross-layer design demands for asynchronous communication. This can be overcome by creating a call back function with a procedure suited to the needs of the layers under consideration.
6. Which among the following is not a cross-layer design challenge associated with the lower layer of the protocol stack?
a) Topology configuration
b) Interference mitigation
c) Cooperative sensing
d) Energy consumption
Answer: a
Clarification: Spectrum sensing is capable of detecting interference only at the transmitters. Interference measurements should be shared to identify the amount of interference at other users and receivers. This is carried out by cooperative sensing. However cooperative sensing generates large communication overhead that leads to reduced performance in terms of channel capacity and energy consumption.
7. Which among the following may be employed to reduce performance degradation on a route with interference towards primary users?
a) Multiple spectrum brokers
b) Spatially distributed amplifiers
c) Multi-spectrum interfaces
d) Spatially distributed base-stations
