250+ TOP MCQs on Rocks as Materials for Construction – 02 and Answers

Tricky Engineering Geology Questions and Answers on “Rocks as Materials for Construction – 02”.

1. Granites have poor fire resistance.
a) True
b) False
Answer: a
Clarification: Many otherwise sound building stones like granites and other coarse grained igneous rocks are poor in fire resistance. These may become unsuitable for use in heat intensive situations.

2. Ease with which stone can be extracted and dressed is called __________
a) Consistency
b) Workability
c) Easability
d) Permeability
Answer: b
Clarification: By workability of a stone is understood the ease in the effort and the economy with which it can be extracted from its natural place of occurrence and finally given a proper shape called dressing.

3. Which of the following is not true about granite?
a) Very high crushing strength
b) Low absorption values
c) Takes good polish
d) High absorption values
Answer: d
Clarification: Granites show very high crushing strength, low absorption value, least porosity, interlocking texture, variety of appealing colours and capacity to get brilliant polish.

4. Limestone can be used as facing stones at situations where __________
a) Air is polluted with industrial gases
b) Along sea coasts where sea water-rich winds can attack them
c) Less chemical exposure and mild weather
d) The place has very harsh weather
Answer: c
Clarification: Use of limestone as facing stones, even if quite strong, should be avoided in situations where- the air is polluted with industrial gases, such as in industrial towns; along sea coasts where sea-water-rich winds can attack them directly.

5. The resistance offered by a stone against rubbing action is called __________
a) Rubbing resistance
b) Abrasive resistance
c) Frictional resistance
d) Shear resistance
Answer: b
Clarification: Abrasive is more a qualitative than quantitative property and may be broadly defined as the resistance, which a stone offers to rubbing action of one kind or another.

6. Which of the following is not a desirable of a road stone?
a) Hydrophobic in nature
b) Sufficient hardness and toughness
c) Durability at the place of use
d) Hydrophilic in nature
Answer: d
Clarification: Following are most important properties a good road stone should possess- sufficient hardness and toughness; durability at the place of use; cementation capacity; non-swelling or hydrophobic property.

7. The property which defines the resistance of stone to rubbing and grinding action under the wheel of the traffic is called __________
a) Abrasive resistance
b) Crushing resistance
c) Hardness
d) Specific gravity
Answer: c
Clarification: Hardness is defined as the resistance of stone to rubbing and grinding action under the wheel of the traffic as also due to mutual attrition. It is known that the aggregates of roads and pavements undergo repeated shaking movements under the traffic load.

8. Marble does not take polish.
a) True
b) False
Answer: b
Clarification: Marbles have sufficient strength to beam building loads and at the same time can be given any desirable shape because of their low hardness. Marble can take a brilliant polish.

9. Common bitumen is generally of which nature?
a) Anionic
b) Cationic
c) Neutral charge
d) No charge
Answer: a
Clarification: Common bitumen is generally anionic in character. Any aggregate having electrolytic property will behave as hydrophobic or water repelling and vice-versa. This holds well in aggregates.

10. The basic igneous rock which is dark coloured and has been extensively used as road materials is __________
a) Granite
b) Gabbro
c) Basalt
d) Syenite
Answer: c
Clarification: Basalts are dark coloured basic igneous rocks that have been extensively used as road materials in areas of their occurrence. The rock is generally characterised with a crushing strength between 2000-3000 kg/cm2 and also with great toughness.

11. The test which is conducted by an indirect method usually is __________
a) Compressive strength test
b) Shear strength test
c) Bending strength test
d) Tensile strength test
Answer: d
Clarification: The tensile strength of rock samples may be determined directly or indirectly. The direct method would require elaborate means to avoid bending while applying tensile forces. Hence usually indirect methods are used to find out the tensile strength of the stones.

To practice Tricky questions and answers on all areas of Engineering Geology,