250+ TOP MCQs on Velocity Sensors and Answers

Mechatronics Problems on “Velocity Sensors”.

1. Which type of velocity sensor has a fixed permanent magnet attached to it?
a) Pyroelectric type
b) Piezoelectric type
c) Moving coil type
d) Stationary coil type
Answer: c
Clarification: Moving coil type of velocity sensor has a fixed permanent magnet attached to it. The coil inside it has a relative motion with respect to the stationary magnet. When the coil is in motion, an electromagnetic force is induced in the coil due to electromagnetic induction. This electromagnetic force is proportional to the velocity of the moving object.

2. What is the unit in which tachometers measure velocity?
a) Revolution per minute
b) Meter per second
c) Kilometer per hour
d) Rotation per minute
Answer: a
Clarification: Tachometers measure velocity in Revolution per minute (RPM). They also act as revolution counters, (i.e) they can also count the number of revolution an object has made in the required interval of time.

3. Which type of tachometer contain primary and secondary stators with fixed windings?
a) AC tachometers
b) DC tachometers
c) Alternating tachometers
d) Brushless tachometers
Answer: a
Clarification: AC tachometers contain primary and secondary stators with fixed windings. It provides fixed output voltage when the rotor is stationary and varying voltage only when the rotor is moving, this varying voltage is proportional to the velocity of the revolving object.

4. For what purpose, a “tachometer” is used?
a) It is used for calculating velocity in revolution per minute
b) It is used for calculating the number of revolutions
c) It is used for calculating velocity in revolution per second
d) It is used for calculating the velocity in rpm and number of revolutions
Answer: d
Clarification: Tachometer is used to calculate velocity in revolution per minute. It can also be used as a revolution counter to calculate the number of revolutions the object has made which we have taken into consideration.

5. The Laser surface velocimeter works on dopplers principle.
a) True
b) False
Answer: a
Clarification: The Laser surface velocimeter(LSV) works on dopplers principle or the dopplers effect. According to dopplers effect, there is change in the intensity of wave (here light wave) when the source and observer move towards or away from each other.

6. Accelerometer can be used to measure the tilt.
a) True
b) False
Answer: a
Clarification: In addition of measuring the inertial measurement of velocity and position, accelerometers can be also used to measure the degree of tilt by considering the acceleration due to gravity as reference. These are generally used in self balancing robots.

7. What does RPM stand for?
a) Rotation per minute
b) Revolution per minute
c) Rounds per minute
d) Rotation per millisecond
Answer: b
Clarification: RPM stands for revolution per minute. It is the most commonly used unit in motor appliances and motor vehicles for denoting the speed of the crank shaft in the engine.

8. _______ velocity sensor is a type of velocity sensor
a) Infrared
b) Proximitor
c) Piezoelectric
d) Ultrasonic
Answer: c
Clarification: Piezoelectric velocity sensor is a type of velocity sensor. The output of the velocity sensor is proportional to the velocity of the object. Since the output of the sensor is very small so it mostly needs an amplifier for using it for any application.

9. LSV in terms of velocity measurement stands for ________
a) Laser Surface Velocimeter
b) Laser Surface Velocity meter
c) Linear Surface Velocimeter
d) Linear Surface Velocity meter
Answer: a
Clarification: LSV in terms of velocity measurement stands for Laser surface velocimeter. It is a non-contact type velocity measuring tool which uses the laser doppler effect for evaluating the light scattered from the moving object.

10. Which is a type of velocity sensor?
a) MSP430G2ET
b) CMCP793V-500
c) MPU 6050
d) L298N
Answer: b
Clarification: CMCP793V-500 is a type of velocity sensor. It is used to examine very small vibrations in terms of velocity. Since these received signals are of very low frequency, they need an amplifier to amplify the received signal and convert them in terms of velocity.

Mechatronics Problems,