Traffic Engineering Multiple Choice Questions on “Vehicular Characteristics”.
1. In how many categories are motor vehicles classified by AASHTO?
a) 4
b) 5
c) 3
d) 1
Answer: a
Clarification: Motor vehicles are classified by AASHTO into four main categories and they are Passenger cars (SUVs, minivans, pickup trucks), Buses (transit buses, school buses), Trucks (single unit trucks, tractor-trailer, tractor semi-trailer combination vehicles) and Recreational vehicles (cars with various types of trailers).
2. Which of the following is critical vehicle property for the design of roadways and traffic control?
a) Type of engine
b) Type of fuel the vehicle runs on
c) Acceleration
d) Age of vehicle
Answer: c
Clarification: Acceleration is one of the critical vehicle property for the design of roadways and traffic con-trol. Braking and deceleration, low speed and high speed turning characteristics are also some of the criti-cal vehicle property required for the design of roadways and traffic control.
3. How many design vehicles has AASHTO specified for geometric design of road?
a) 10
b) 11
c) 13
d) 20
Answer: d
Clarification: AASHTO has specified 20 design vehicles, each with specified characteristics for geometric design of the road. Some of the design vehicles as specified by AASHTO are P for passenger cars, SU for single truck unit, BUS-40 for intercity bus with 40ft wheelbase.
4. Which of the following is the incorrect use of Design vehicles?
a) Design of turning roadways
b) Design of intersection curbs
c) Determination of lane widths
d) Design of different types of vehicles
Answer: d
Clarification: Design vehicles are used for the design of turning roadways and intersection curbs primarily. It is also used to determine lane widths such as lane widening on curves.
5. Which of the following is the minimum design vehicle for local street applications?
a) Passenger car
b) Single-unit truck
c) Intercity bus
d) Triple semi-trailer
Answer: b
Clarification: The minimum design vehicle for local street applications is Single-unit truck because hook and ladder fire vehicles have rear axle steering that allows the vehicle to negotiate sharp turns, so the use of the single unit truck is not considered to hinder emergency vehicle.
6. Which of the following is the design vehicle for parking lots?
a) Passenger car
b) Single-unit truck
c) Intercity bus
d) Triple semi-trailer
Answer: a
Clarification: The design vehicle generally used for parking lots is Passenger car (P). Access to emergency vehicles is also considered in the design of parking lots in all the buildings and public places.
7. For the design of highways and intersections, the selection of design vehicle must consider __________
a) Vehicle length
b) Vehicle mix
c) Emergency vehicles
d) Topography
Answer: b
Clarification: For the design of highways and intersections, the selection of design vehicle must consider the expected vehicle mix. The design vehicle should accommodate 95% or more of the expected vehicle mix.
8. What is the height range of design vehicles?
a) 4.25 ft—13.5 ft
b) 4.5 ft—13.5 ft
c) 4.25 ft—14 ft
d) 4.25 ft—15 ft