Statistical Quality Control Multiple Choice Questions on “Control Charting Techniques – Control Charts for Multiple-Stream Processes – 2”.
1. The upper control limits for the GCC will be ____________ for the x̅ chart.
a) UCL=(bar{bar{x}}+A_2 overline{R})
b) UCL=(bar{bar{x}}-A_2 R)
c) UCL=(bar{bar{x}}-A_2 overline{R})
d) UCL=(bar{bar{x}}+A_2 R)
Answer: a
Clarification: The GCC are used to control the multiple stream processes. These control charts are having the upper control limits as,
UCL=(bar{bar{x}}+A_2 overline{R})
2. What is the value of the difference between the UCL and the LCL of x̅ chart of the GCC?
a) 1
b) 0
c) 3A2R
d) 2A2R
Answer: d
Clarification: As we know that the control limits for the GCC are,
UCL=(bar{bar{x}}+A_2 overline{R}); LCL=(bar{bar{x}}-A_2 overline{R})
So the difference between the control limits of GCC will be 2A2R
3. What is the value of the UCL of the R chart constructed for the GCC?
a) UCL = D4R
b) UCL = D3R
c) UCL = R ̅+ D3R
d) UCL = R ̅+ D4R
Answer: a
Clarification: The GCC is prepared with the same way as the simple x and R charts are constructed for individual process streams. The value of the UCL of the R chart of the GCC is,
UCL=D4R
4. What is the ratio of the UCL to LCL of the same GCC R chart?
a) UCL/LCL=D2/D3
b) UCL/LCL=D3/D4
c) UCL/LCL=D4/D3
d) UCL/LCL=D4/D2
Answer: c
Clarification: We know that the values of the control limits of the R chart for the GCC are,
UCL=D4R ;LCL=D3R
So their ratio will be,
UCL/LCL=D4/D3.
5. If the sample size is 4, what will be the value of the upper control limit of the GCC R chart?
a) UCL=2.672R̅
b) UCL=2.282R̅
c) UCL=2.114R̅
d) UCL=2.574R̅
Answer: b
Clarification: We know that, for sample size= 4, the value of D4=2.282. So putting it into the equation of the UCL of R chart of the GCC gives,
UCL=2.282R
6. What will be the value of the LCL of the x chart of the GCC when the value of x =12, and the value of R̅= 0.1 and sample size = 4?
a) 12.0729
b) 12.9271
c) 11.9271
d) 11.0729
Answer: a
Clarification: We know that, for n=4, A2=0.0729 Putting the above data into the equation of the UCL of the x̅ chart of GCC, we get,
UCL=12.0729.
7. When the subgroup size is 4 for any process samples, what will be the value of the R chart LCL of the GCC?
a) 5
b) 1
c) 0
d) 2
Answer: c
Clarification: We know that for n=4, D3 has the value of zero. Putting it into the equation of the LCL of the R chart for the GCC, gives us, LCL=0.
8. In GCC we plot ___________ means observed at any time period.
a) Only the maximum
b) Only the minimum
c) Mean of the
d) Both, the maximum and the minimum
Answer: d
Clarification: When the GCC are used to control the process, we plot only the largest and the smallest of the s means observed at any time period on the x̅ chart. If they lie inside the control limits, so will others do.
9. ___________ range will be plotted on the R chart of the GCC.
a) Maximum
b) Minimum
c) Both the maximum and the minimum
d) Neither the maximum nor the minimum
