250+ TOP MCQs on Pile Driving Formulas and Answers

Construction and Building Materials Multiple Choice Questions on “Pile Driving Formulas”.

1. __________ have been developed for determining the load bearing capacity of piles.
a) Wave action theory
b) Empirical formulas
c) Static formulas
d) Dynamic formulas

Answer: b
Clarification: Empirical formulas are based on tests that are carried out under limited conditions and hence such formulas are not generally adopted.

2. The ___________ is based upon the longitudinal wave transmission and end impact.
a) Static formulas
b) Dynamic formulas
c) Empirical formulas
d) Wave action theory

Answer: d
Clarification: The wave action theory is too complex to be used for ordinary cases and it can be applied only after the preparation of charts with the help of electronic computers.

3. The __________ equate the soil resistance to the bearing power of the pile.
a) Dynamic formulas
b) Wave action theory
c) Static formulas
d) Empirical formulas

Answer: c
Clarification: To determine Static formulas, the samples of soils through which piles are to be driven are tested in the laboratory and properties of different soils are studied in detail. These results from the laboratory tests are then used to determine the bearing capacity of a pile of a given length, shape and size.

4. The ___________ obtain the bearing power of the piles by equating the soil resistance to the energy of the blow.
a) Static formulas
b) Dynamic formulas
c) Wave action theory
d) Empirical formulas

Answer: b
Clarification: Extreme care should be taken while adopting dynamic formulas. There is no dynamic formula which can be applied for all the varying conditions of the work. Most of the dynamic formulas are based on some rational approach.

5. Identify the given pile driving formula.

R = (W1×H)/S × W1/(W1+W2) 

a) Dutch formula
b) Eytelwein formula
c) Hiley formula
d) Engineering News formula

Answer: a
Clarification: Above given formula is Dutch formula.
Where, R = ultimate load carrying capacity of pile in kg.
W1 = weight of falling mass in kg.
W2 = weight of pile including shoe, cap, etc. in kg.
H = height of free fall of ram in case of drop hammers, in cm.
S = final settlement of pile in centimetre.

6. Identify the given pile driving formula.

R1 = 2×W1(0.033)H/(0.39×S+1.00)

a) Dutch formula
b) Engineering News formula
c) Eytelwein formula
d) Hiley formula

Answer: b
Clarification: Above given formula is Engineering News formula.
Where, R1 = safe load on a pile in kg.
E = Total energy of a ram at bottom of its download Stroke in kg-m.
Engineering News formula assumes a factor of safety of 6.

7. Identify the given pile driving formula.

R1 = (2×W1(0.033)H) ÷ 0.39 × S(1+W1/W2)

a) Eytelwein formula
b) Dutch formula
c) Engineering News formula
d) Hiley formula

Answer: a
Clarification: Above given Eytelwein formula is for drop hammers.
Where, R1 = safe load on a pile in kg.
S = final settlement of pile in centimetre.
Eytelwein formula assumes of a factor of safety of 6.

8. Identify the given pile driving formula.

a) Dutch formula
b) Hiley formula
c) Engineering News formula
d) Ritter formula

Answer: b
Clarification: Above given formula is Hiley formula. This formula is widely used in determining the safe load on pile.
Where, e = efficiency of hammer.
K = coefficient of restitution.

9. Identify the given pile driving formula.

a) Major Sander formula
b) Merriman formula
c) Ritter formula
d) Kreutzer formula

Answer: d
Clarification: Kreutzer formula can be used only for Drop hammer and it is given as above. Where, H1 and H2 = different heights of fall of hammer in centimetre.
S1 and S2 = corresponding Penetration in cm.

10. Identify the given pile driving formula.

a) Ritter formula
b) Major Sander formula
c) Kreutzer formula
d) Vulcan Iron Works formula

Answer: b
Clarification: Major Sander formula is the simplest form of pile driving formula using a factor of safety of 8. Where, R1 = safe load on a pile in kg.
S = final settlement of pile in cm.

11. Identify the given pile driving formula.

a) Merriman formula
b) Ritter formula
c) Vulcan Iron Works formula
d) Kreutzer formula

Answer: b
Clarification: Above given formula is Ritter formula. It is an important pile driving dynamic formula. Where, R = ultimate load carrying capacity of pile in kg.
H = height of free fall of ram in case of drop hammer in cm.
S = final settlement of pile in cm.

12. Identify the given pile driving formula.

a) Merriman formula
b) Ritter formula
c) Kreutzer formula
d) Dutch formula

Answer: a
Clarification: Merriman formula is same as the Major Sander formula except that a factor of safety of 6 is used. It is one of the most important pile-driving dynamic formulas.

Leave a Reply

Your email address will not be published. Required fields are marked *