250+ TOP MCQs on Concrete Cloth, Polymer Impregnated Concrete and Answers

Concrete Technology Interview Questions and Answers for Experienced people on “Concrete Cloth, Polymer Impregnated Concrete”.

1. What is the 10 day compressive failure stress in N/mm²?
a) 40
b) 1500
c) 3.4
d) 180
Answer: a
Clarification: This test is based on ASTM C473 – 07 and the 10 day compressive failure stress is 40 N/mm².

2. What is the 10 day compressive young’s modulus in N/mm²?
a) 40
b) 1500
c) 3.4
d) 180
Answer: b
Clarification: This test is based on ASTM C473 – 07 and the 10 day compressive young’s modulus is 1500 N/mm².

3. What is the 10 day bending failure stress in N/mm²?
a) 40
b) 1500
c) 3.4
d) 180
Answer: c
Clarification: This test is based on BS EN 12467:2004 and the 10 day bending failure stress is 3.4 N/mm².

4. What is the 10 day bending young’s modulus in N/mm²?
a) 40
b) 1500
c) 3.4
d) 180
Answer: d
Clarification: This test is based on BS EN 12467:2004 and the 10 day bending young’s modulus is 180 N/mm².

5. What is the 7th day compressive failure stress in N/mm²?
a) 40
b) 1500
c) 38
d) 180
Answer: c
Clarification: This test is based on ASTM C473 – 07 and the 7th day compressive failure stress is 38 N/mm².

6. What is the 7 day bending failure stress in N/mm²?
a) 40
b) 1500
c) 3.3
d) 180
Answer: c
Clarification: This test is based on BS EN 12467:2004 and the 7 day bending failure stress is 3.3 N/mm².

7. ___________ mm thickness is not available in concrete cloth.
a) 5
b) 8
c) 13
d) 18
Answer: d
Clarification: Concrete cloth is usually available in 3 thicknesses i.e., 5mm, 8mm and 13 mm whereas theoretically there is no limit in the thickness of concrete cloth and typical thickness lies in 2mm to 15 mm.

8. ________ viscosity liquid monomers are impregnated with the hardened cement composite structure.
a) High
b) 0
c) Low
d) Very high
Answer: c
Clarification: For making the polymer impregnated concrete, the pre-polymers or the low viscosity liquid monomers are partially or fully impregnated with the hardened cement composite structure.

9. Water-filled voids ranges from _______ % of the total volume of the component for dense concrete.
a) 5
b) 15
c) 10
d) 20
Answer: a
Clarification: Water-filled voids ranges from 5 % of the total volume of the component for dense concrete where as 15 % is for gap-graded concrete.

10. Water-filled voids ranges from _______ % of the total volume of the component for gap-graded concrete.
a) 5
b) 15
c) 10
d) 20
Answer: b
Clarification: Water-filled voids ranges from 15 % of the total volume of the component for gap-graded concrete where as 5 % is for dense concrete.

11. What is the time required to give heating to remove the moisture from the concrete?
a) 6-8 hrs
b) 10 hrs
c) 24 hrs
d) 48 hrs
Answer: a
Clarification: 6 to 8 hours are must to give heat supply to remove the moisture from the Polymer Impregnated Concrete.

12. At what temperature the heat is supplied to concrete to remove moisture in ^oC?
a) 35
b) 120-150
c) 100
d) 60-150
Answer: b
Clarification: 120 ^oC to 150 ^oC is the temperature required to give the heating to remove moisture in Polymer Impregnated Concrete.

13. Which temperature avoids flammability?
a) 35
b) 120-150
c) 100
d) 60-150
Answer: a
Clarification: 35 ^oC is the temperature that helps to avoid flammability and at that temperature cooling is done after the complete removal of moisture.

Concrete Technology for Interviews,