Hydraulic Machines Multiple Choice Questions on “Double Acting Pumps”.
1. When a cylinder has inlet and outlet ports at each end, then it is called as __________
a) Double acting
b) Air lift pumps
c) Reciprocating pumps
d) Centrifugal pumps
Answer: a
Clarification: When a cylinder has inlet and outlet ports at each end, then it is called as double acting pumps. It operates similar to the single acting pump with respect to its motion.
2. Turbomachines work under ________
a) Newtons first law
b) Newtons second law
c) Newtons third law
d) Kepler’s law
Answer: b
Clarification: Turbomachines work under Newtons second law. Centrifugal pump is a turbomachinery. Turbomachines are machines that transfer energy between a rotor and a fluid, including both turbines and compressors. It is a mechanical device.
3. The main function of nozzle is to __________
a) Varying temperatures
b) Pressure variations
c) Load variations
d) Heat variations
Answer: b
Clarification: The main function of nozzle is to vary the pressure of fluid passing through the nozzle. It is done by opening and shutting the sets of nozzles. Thus, its main function is to regulate pressure of the fluid.
4. When the piston moves forward, liquid is drawn ________
a) Into the cylinder
b) Away from the cylinder
c) Into the draft tube
d) Away from the draft tube
Answer: a
Clarification: When the piston moves forward, liquid is drawn into the cylinder head. When a cylinder has inlet and outlet ports at each end, then it is called as double acting pumps. It operates similar to the single acting pump with respect to its motion.
5. The pump injects compressed air at the _________
a) Rotor pipe
b) Bottom of the discharge pipe
c) Top of the discharge pipe
d) Rotor to draft
Answer: b
Clarification: An airlift pump injects the compressed air at the bottom of the discharge pipe. A pump that has low suction and moderate discharge is called air lift pumps. These pumps have a moderate discharge with liquid and entrained solids.
6. In a reciprocating pump, with the change in discharge pressure, ________
a) The Volume delivered increases
b) The volume delivered decreases
c) Volume delivered remains the same
d) Volume delivered is independent
Answer: c
Clarification: Irrespective of the change in the discharge pressure, the volume of the fluid delivered remains the same in a reciprocating pump. Thus, it does even vary with the slight increase or decrease of the pump.
7. The compressed air mixes with the liquid casing to become less dense.
a) True
b) False
Answer: a
Clarification: The compressed air mixes with the liquid casing to become less denser that the rest of the liquid. This is because it will get displaced upwards through the discharge pipe.
8. The amount of fluid that leaks internally is called ________
a) Head race
b) Slip
c) Tail race
d) Internal friction
Answer: b
Clarification: The amount of fluid that leaks internally is called as slip. The slip indicates the condition of the pump to improve its overall efficiency.
9. Airlift pumps are widely used in aquaculture to pump.
a) True
b) False
Answer: a
Clarification: The statement is true. Airlift pumps are widely used in aquaculture to pump. It also circulates and aerates the water in a closed environment. This helps it to recirculate in system and ponds.
10. Centrifugal pumps are used to transport ________
a) Pressure
b) Speed
c) Power
d) Fluid
Answer: d
Clarification: Centrifugal pumps are used to transport fluids. They transport fluids by conversion of energies. Centrifugal pumps are a sub class of dynamic axisymmetric work absorbing turbomachinery.
11. For a good condition, slip should be________
a) Below 1 percent
b) 1 to 2 percent
c) 3 to 4 percent
d) Above 5 percent
Answer: a
Clarification: For a good condition of the pump, the slip should be below 1 percent. The amount of fluid that leaks internally is called as slip. The slip indicates the condition of the pump to improve its overall efficiency.
12. If the slip is above 5 percent, the pumps needs to be ______
a) Dragged
b) Overhauled
c) Retracted
d) Intermittent
Answer: b
Clarification: If the slip is above 5 percent, the pumps needs to be overhauled. The amount of fluid that leaks internally is called as slip. The slip indicates the condition of the pump to improve its overall efficiency.
13. The rotational kinetic energy comes from ______
a) Engine motor
b) Pump
c) Tank
d) Draft tube
Answer: a
Clarification: Centrifugal pumps transport fluids by converting rotational Kinetic energy to hydrodynamic energy. The rotational kinetic energy comes from engine or electrical motor.
14. When the balancing of the turbine is disturbed, we use ________
a) Throttle governing
b) Steam governing
c) Nozzle governing
d) Emergency governing