Computational Fluid Dynamics Multiple Choice Questions on “High Resolution Schemes – Normalized Variable Formulation”.
1. The Normalized Variable Formulation (NVF) is used to ___________
a) describe and analyse temporal schemes
b) describe and analyse high-resolution schemes
c) visualize high-resolution schemes
d) visualize temporal scheme
Answer: b
Clarification: The Normalized Variable Formulation (NVF) is used for the description and analysis of high-resolution schemes. The Normalized Variable Diagram (NVD) is used for visualizing the high-resolution schemes.
2. The NVF approach does not rely on _____________
a) far downwind node
b) far upwind node
c) upwind node
d) downwind node
Answer: a
Clarification: The NVF is a face formulation procedure based on normalizing the dependent variable for which the flow variable at the face has to be constructed. The NVF approach relies upon the upwind, downwind and far upwind nodes.
3. Consider the following diagram.
In the diagram,
phi_u → Φu
phi_d → Φd
phi_c → Φc
Find the normalized flow variable ((tilde{phi_f})) at the face f as in the NVF approach.
a) (tilde{phi_f}=frac{(phi_f-phi_c)}{(phi_f-phi_u)})
b) (tilde{phi_f}=frac{(phi_f-phi_u)}{(phi_c-phi_u)})
c) (tilde{phi_f}=frac{(phi_f-phi_c)}{(phi_d-phi_c)})
d) (tilde{phi_f}=frac{(phi_f-phi_u)}{(phi_d-phi_u)})
Answer: d
Clarification: Normalization is a procedure of non-dimensionalizing a variable. In the NVF approach, the flow variable (Φf) is normalized as
(tilde{phi_f}=frac{(phi_f-phi_u)}{(phi_d-phi_u)})
Where,
Φu → Flow variable at the far upwind node.
Φd → Flow variable at the downwind node.
Φc → Flow variable at the upwind node.
4. What are the normalized values of the variables Φd (downwind) and Φu (far upwind)?
a) 1 and 0
b) 0 and ∞
c) 1 and ∞
d) 0 and 1
Answer: a
Clarification: From the normalization formula,
(tilde{phi_d}=frac{phi_d-phi_u}{phi_d-phi_u}=1).
(tilde{phi_u}=frac{phi_u-phi_u}{phi_d-phi_u}=0).
5. Which of these conditions represent a monotonic profile of variable Φ between the far upwind node and downwind node?
(Note: (tilde{phi_c}) is the normalized flow variable at the upwind node).
a) (1leqtilde{phi_c}leq ∞)
b) (0leqtilde{phi_c}leq 1)
c) (0leqtilde{phi_c}leq 0.5)
d) (0.5leqtilde{phi_c}leq 1)
Answer: b
Clarification: For a variable Φ to have a monotonic profile,
(tilde{phi_u}leqtilde{phi_c}leqtilde{phi_d})
But, (tilde{phi_u}=0 ,and, tilde{phi_d}=1.) So,
(0leqtilde{phi_c}leq 1.)
6. If (tilde{phi_c}1), what does it mean?
(Note: (tilde{phi_c}) is the normalized flow variable at the upwind node).
a) Maximum at c
b) Minimum at c
c) Extremum at c
d) Global minimum at c
Answer: c
Clarification: According to the NVF approach, the value of (tilde{phi_{c}}) should be bounded between 0 and 1. If this is not the case, either local maximum or local minimum exists at the upwind node. In general, we can say that the upwind node gets an extremum.
7. What is the normalized flow variable at the face ((tilde{phi_f})) for the upwind and downwind schemes respectively?
(Note: (tilde{phi_c}) is the normalized flow variable at the upwind node).
a) 1 and 0
b) 1 and (tilde{phi_c})
c) 0 and 1
d) (tilde{phi_c}) and 1
Answer: d
Clarification: For the upwind scheme,
(phi_f=phi_c⟹tilde{phi_f}=tilde{phi_c}.)
For the downwind scheme,
(phi_f=phi_d Rightarrow tilde{phi_f}=1.)
Where,
Φf → Flow variable at the face.
Φc → Flow variable at the upwind node.
Φd → Flow variable at the downwind node.
(tilde{phi_f}, tilde{phi_c}) → Normalized flow variables at respective nodes.
8. Normalize the following equation.
(phi_f=phi_c+frac{phi_d-phi_u}{4})
Where,
Φf → Flow variable at the face.
Φc → Flow variable at the upwind node.
Φd → Flow variable at the downwind node.
Φu → Flow variable at the far upwind node.
a) (tilde{phi_f}=tilde{phi_c}+frac{1}{4})
b) (tilde{phi_f}=frac{tilde{phi_c}}{4})
c) (tilde{phi_f}=1+frac{tilde{phi_c}}{4})
d) (tilde{phi_f}=tilde{phi_c}+frac{3}{4})