Manufacturing Engineering Multiple Choice Questions on “Metal Casting Processes and Equipment”.
1. Which of the following are typically made of sand, plaster, ceramics and similar materials and generally are mixed with various binders?
a) Permanent molds
b) Expendable molds
c) Composite molds
d) Ceramic molds
Answer: b
Clarification: Expendable molds, which typically are made of sand, plaster, ceramics, and similar materials and generally are mixed with various binders (bonding agents) for improved properties whereas permanent molds, which are made of metals that maintain their strength at high temperatures.
2. Which of the following are made of metals that maintain their strength at high temperatures?
a) Permanent molds
b) Expendable molds
c) Composite molds
d) Ceramic molds
Answer: a
Clarification: Expendable molds, which typically are made of sand, plaster, ceramics, and similar materials and generally are mixed with various binders (bonding agents) for improved properties whereas permanent molds, which are made of metals that maintain their strength at high temperatures.
3. Which of the following expandable molds are less heat conductors than metallic molds?
a) metallic
b) nonmetallic
c) composite
d) ceramic
Answer: b
Clarification: Metal molds are better heat conductors than expendable non-metallic molds, hence, the solidifying casting is subjected to a higher rate of cooling, which in turn affects the microstructure and grain size Within the casting.
4. Which of the following are made of two or more different materials (combining the advantages of each material)?
a) Permanent molds
b) Expendable molds
c) Composite molds
d) Ceramic molds
Answer: c
Clarification: Composite molds, which are made of two or more different materials (such as sand, graphite, and metal) combining the advantages of each material.
5. The directional solidification in casting can be improved by using __________
a) chaplets and riser
b) chills and padding
c) chaplets and padding
d) chills and riser
Answer: d
Clarification: Directional solidification is solidification that occurs from farthest end of the casting and works its way towards the sprue. Chills and riser are used in improving directional solidification.
6. In permanent mold casting method __________
a) molten metal is poured in a metallic mold, retained in the mold long enough for the outer skin to solidify and finally mold is turned over to remove molten metal still in molten condition
b) molten metal is poured and allowed to solidify while the mold is revolving
c) Molten metal is forced into mold under high pressure
d) none of the mentioned
Answer: d
Clarification: Permanent mold castings are used repeatedly and are designed in such a way that the casting can be removed easily and the mold used for the next casting. Metal molds are better heat conductors than expendable non-metallic molds hence, the solidifying casting is subjected to a higher rate of cooling, which in turn affects the microstructure and grain size Within the casting.
7. In which of the following casting method, the molten metal is poured and allowed to solidify while the mold is revolving?
a) die casting method
b) slush casting method
c) centrifugal casting method
d) investment casting method
