Manufacturing Engineering Multiple Choice Questions on “Milling Cutters”.
1. Which of the following milling cutters have teeth only on their periphery?
a) Plain milling cutters
b) Side milling cutters
c) End milling cutters
d) Face milling cutters
Answer: a
Clarification: Plain milling cutters have teeth only on their periphery.
2. Which of the following milling cutters have teeth on their periphery as well as on their one side or both the side?
a) Plain milling cutters
b) Side milling cutters
c) End milling cutters
d) Face milling cutters
Answer: b
Clarification: Side milling cutters have teeth on their periphery as well as on their one side or both the side. They can cut from both the sides.
3. Which of the following milling cutters have teeth on their periphery as well as on their end?
a) Plain milling cutters
b) Side milling cutters
c) End milling cutters
d) Face milling cutters
Answer: c
Clarification: End milling cutters have teeth on their periphery as well as on their end. They are used in end milling or periphery milling.
4. Which of the following milling cutters have teeth on their periphery as well as on their end face?
a) Plain milling cutters
b) Side milling cutters
c) End milling cutters
d) Face milling cutters
Answer: d
Clarification: Face milling cutters have teeth on their periphery as well as on their end face. They are used in face milling operations.
5. In face milling cutters, maximum cutting is done by the teeth on the periphery.
a) True
b) False
Answer: a
Clarification: Maximum cutting in face milling cutter is generally done by the teeth on its periphery.
6. In face milling cutters, teeth on end face perform a type of finishing operation during cutting.
a) True
b) False
Answer: a
Clarification: Maximum cutting in face milling cutter is generally done by the teeth on its periphery and teeth on end face generally perform finishing the operation.
7. Which of the following milling cutters can be used for cutting thin slots or for parting off operations?
a) Plain milling cutters
b) Side milling cutters
c) End milling cutters
d) Metal slitting cutters
Answer: d
Clarification: Metal slitting cutters can be used for cutting thin slots or for parting off operations.
8. Which of the following milling cutters can be used for formation of V-grooves?
a) Angle milling cutters
b) Form milling cutters
c) Gear cutters
d) Woodruff-key cutter
Answer: a
Clarification: As V is an angular shape, angle milling cutters can be used for the formation of V-grooves.
9. Woodruff Key milling cutter is a type of
a) Plain milling cutters
b) Side milling cutters
c) End milling cutters
d) Face milling cutters
Answer: c
Clarification: Woodruff Key milling cutter is a small type of End milling cutters. These are special types of cutters.
10. Which of the following milling cutter is capable of removable of large material with very small power consumption?
a) Plain milling cutters
b) Side milling cutters
c) End milling cutters
d) Face milling cutters