Food Engineering Multiple Choice Questions on “Unit Operations – Fluid Mechanics-1”.
1. Statement 1: Bernoulli’s equation can be applied to flow through pipes both, with and without friction.
Statement 2: Air is an incompressible fluid.
a) True, False
b) True, True
c) False, False
d) False, True
Answer: a
Clarification: Bernoulli’s equation can be applied to flow through pipes both, with and without friction. Gases and vapours are compressible fluids. Hence air is compressible.
2. What is Kinetic Energy Factor in the Bernoulli’s equation?
a) It is because friction varies
b) It is because friction stays constant
c) It is because the velocity in every layer varies and only the average velocity is accounted hence a correction factor is a need
d) None of the mentioned
Answer: c
Clarification: Kinetic Energy Factor in the Bernoulli’s equation is because the velocity in every layer varies and only the average velocity is accounted hence a correction factor is a need.
3. In Bernoulli’s equation, the friction correction factor is added to the LHS and the energy contributed by the pump is written on the RHS.
a) True
b) False
Answer: b
Clarification: In the Bernoulli’s equation, the friction correction factor is added to the RHS and the energy contributed by the pump is written on the LHS.
4. Statement 1: Reynolds number is the ratio of viscous force to Inertial Force.
Statement 2: The thickness of Boundary layer increases with the increase in distance from the surface.
a) True, False
b) True, True
c) False, False
d) False, True
Answer: c
Clarification: Reynolds number is the ratio of Inertial Force to viscous force. The thickness of the Boundary layer decreases with the increase in distance from the surface.
5. The energy loss due to the friction at the walls of a pipe is called _____
a) Kinetic friction
b) Skin friction
c) Static friction
d) None of the mentioned
Answer: b
Clarification: The energy loss due to the friction at the walls of a pipe is called Skin friction.
6. Statement 1: Friction factor ‘f’ is an important factor in turbulent flow.
Statement 2: ‘f’ is the ratio of shear stress (ϩw) to kinetic energy head ((ρv2)⁄2g).
a) True, False
b) True, True
c) False, False
d) False, True
Answer: b
Clarification: Both the statements are true.
7. Which of the following pumps is this pump- It has no rotating or reciprocating parts involved. No leakage. Air/gas used to impart energy.
a) Piston pump
b) Diaphragm pump
c) Gear pump
d) Air-lift pump
Answer: d
Clarification: Air-lift pump has no rotating or reciprocating parts involved. No leakage. Air/gas used to impart energy.
8. Statement 1: Non-Newtonian fluids have a linear relationship between shear stress and shear strain.
Statement 2: Tubes are larger than pipes in diameter and have thicker walls.
a) True, False
b) True, True
c) False, False
d) False, True
Answer: c
Clarification: Newtonian fluids have a linear relationship between shear stress and shear strain. Pipes are larger than tubes in diameter and have thicker walls.
9. Pipes are described in the form of _____
a) None of the mentioned
b) Formation Number
c) All of the mentioned
d) Schedule Number
Answer: d
Clarification: Pipes are described in the form of Schedule Number.
10. Statement 1: Two pipes are joined using _____
Statement 2: The sealing material between two pipes to be joined is called _____
a) Union Joint, Coupling
b) Coupling, Gasket
c) Coupling, Thread cuttings
d) Thread cuttings, Gasket
Answer: b
Clarification: Two pipes are joined using Coupling. The sealing material between two pipes to be joined is called Gasket.
11. Statement 1: When an additional connection such as a valve/ tap is to be added, _____ is used.
Statement 2: Bents have more pressure drop than elbows.
a) Union joint, True
b) Union joint, False
c) T- joint, True
d) T- joint, False
Answer: c
Clarification: When an additional connection such as a valve/ tap is to be added, T- joint is used. Bents and elbows are both used when there is a change in the direction of flow. But, pressure drop in bents is more than in elbows, although bents are sturdier than elbows.
12. Which of the following is true about On-Off Control?
a) On-Off valves are called Plug Cocks
b) The size of the valve path is as big as the pipe itself
c) Pressure drop in these is the least compared to all other valves
d) All of the mentioned
Answer: d
Clarification: All the given statements are true.
