Automotive Engine Design Questions and Answers for Entrance exams on “Valve Timing Technologies – Engine Bearings”.
1. What is the thickness in mm of the overlay which is provided on the bearings?
a) 0.01-0.02
b) 0.03-0.04
c) 0.05-0.06
d) 0.07-0.08
Answer: a
Clarification: The thickness of the overlay or the third layer of Babbit is used on top of the copper-lead and aluminum bearings. Due to overlay, which is 0.01-0.02 mm thick, such bearings are expensive.
2. How is one of the bearings made to prevent the crankshaft from moving to and fro in the endwise direction?
a) Magnetic bearing
b) Fluid bearing
c) Ball-bearing
d) Thrust bearing
Answer: d
Clarification: To prevent the crankshaft from moving to and fro in the endwise direction, one of the bearings is made a thrust bearing. It is provided with flanges on both sides, which fit accurately with the sides of the crank web on which it is installed.
3. Which of the following is provided to cushion the journal and to increase the life of the bearing?
a) Direction control valve
b) Overlay
c) Position control valve
d) Compressor
Answer: b
Clarification: A overlay or third layer of Babbit is used on top of the copper-lead and aluminum bearings. Due to the overlay, which is 0.01-0.02 mm thick, such bearings are expensive. However the overlay cushions the journal during the running-in period and thus increases the life of bearing as well as journal.
4. Which is the bearing material which is being used in the modern engine?
a) Brass
b) Cast iron
c) Aluminum
d) Chromium
Answer: c
Clarification: The bearing material used in modern engines is aluminum with small quantities of tin and copper, aluminum bearings are used for high load and speed conditions. However, it is more expensive due to which they are sometimes used with cheaper materials.
5. Which of the following helps the engine bearing by supporting the operating loads with minimum friction?
a) Good fuel-air ratio for combustion
b) Vibration dampers
c) Clutch
d) Lubricant
Answer: d
Clarification: The engine bearing has main requirements like the engine bearing should support the operating loads with minimum friction using lubricant. Whereas the fuel-air ratio, vibration-dampers, and clutch do not affect the engine bearings.
6. Which one of the following is not an engine bearing requirement?
a) Corrosion resistance
b) Long life
c) Should multiple the variation of the shafts
d) Should have score resistance
Answer: c
Clarification: The engine bearing requirements are: they should have a long life, the bearing should have score resistance that prevents the bearing material from seizing to the shaft, corrosion resistance. Whereas the bearing has to have the ability to flow slightly to match the small variations in the shaft and not to multiply the variations.
7. Which are the types of material used in Babbit type bearing material?
a) Lead with a small quantity of copper and antimony
b) Steal with a small quantity of zinc and tin
c) Zinc with a small quantity of lead and copper
d) Silver with a small quantity of brass and aluminum
