Statistical Quality Control Questions and Answers for Campus interviews on “Attribute Charts – Control Charts for Nonconformities (Defects) – 2”.
1. The 3 – sigma upper limit for a control chart for average number of nonconformities per unit, is expressed by ___________
a) UCL=(bar{u} + 3sqrt{frac{bar{u}}{n}})
b) UCL=(bar{u} – 3sqrt{frac{bar{u}}{n}})
c) UCL=(bar{u} – 2sqrt{frac{bar{u}}{n}})
d) UCL=(bar{u} – frac{3}{2} sqrt{frac{bar{u}}{n}})
Answer: a
Clarification: The 3 – sigma upper control limit for a control chart for average number of nonconformities per unit, is expressed by the following expression.
UCL=(bar{u} + 3sqrt{frac{bar{u}}{n}})
2. If the average number of nonconformities per unit per sample is 0.074, what will be the lower control limit for the u-chart?
a) 0.0414
b) 0.0221
c) 0.0
d) -0.0513
Answer: c
Clarification: The lower control limit for the u-chart is expressed by,
LCL = (bar{u} – 3sqrt{frac{bar{u}}{n}})
Putting (bar{u})=0.074 we get, LCL=-0.0414. As LCL is less than 0, we use LCL=0.
3. The control chart for total number of events is called ____________
a) g-charts
b) R-charts
c) h-charts
d) c-charts
Answer: a
Clarification: The control charts, which are developed for the total number of events, are called the g-charts. They were first developed by Kaminski et al in 1992.
4. The control charts developed for the average number of events is generally called ______________
a) g-chart
b) h-chart
c) s-chart
d) s-square-charts
Answer: b
Clarification: The control charts, which are based on the average number of events data, are called the h-charts. They were also developed by Kaminski et al.
5. What will be the center line value for a Kaminski et al h-chart when standards are given?
a) (frac{1-p}{p}-a)
b) (frac{1+p}{p}+a)
c) (frac{1+p}{p}-a)
d) (frac{1-p}{p}+a)
Answer: d
Clarification: The center line value for the Kaminski et al h-chart is given by the equation,
CL = (frac{1-p}{p}+a)
6. What is the value of the Upper control limit for the g-chart?
a) (n(frac{1-p}{p}-a)+Lsqrt{n(1-p)}{p^2})
b) (n(frac{1-p}{p}+a)+Lsqrt{n(1+p)}{p^2})
c) (n(frac{1-p}{p}+a)+Lsqrt{n(1-p)}{p^2})
d) (n(frac{1-p}{p}+a)+Lsqrt{(1-p)}{p^2})
Answer: c
Clarification: The value of upper limit for the g chart given by Kaminski et al is,
(n(frac{1-p}{p}+a)+Lsqrt{n(1-p)}{p^2})
7. What is the value of the center line of g-chart?
a) (n(frac{1+p}{p}+a))
b) (n(frac{1-p}{p}+a))
c) (n(frac{1+p}{p}-a))
d) (n(frac{1-p}{p}-a))
Answer: b
Clarification: The center line value for the g-chart construction is calculated by following formula,
(n(frac{1-p}{p}+a))
8. What is the value of center line of g-chart when there is no standard given?
a) (bar{t}+3sqrt{bar{t}})
b) (bar{t})
c) (bar{t}-3sqrt{bar{t}})
d) (bar{t}+0.5sqrt{bar{t}})
Answer: b
Clarification: The center line value for the g-chart, when there is no standard given is given by,
Cl=(bar{t}=frac{t_1+t_2+t_3+⋯+t_m}{m})
where t1, t2, t3,…,tm are the total numbers of events in m subgroups each.
9. What is the center line value for the average number of events control chart, when there is no standard given?
a) t/n
b) 2t/3n
c) 2 t/n
d) t/2n
Answer: a
Clarification: The center line value for the average number of events control chart or h-chart, when there is no standard given, is expressed by,
CL= t/n.
10. Which of these is used in the standardized chart for u-chart with variable sample size?
a) Zi
b) Mi
c) Ui
d) Ai
Answer: a
Clarification: For the standardized control chart for a u-chart with variable sample size, the construction of the standardized control chart requires plotting a standard statistic written as Zi.
11. What is the value of Zi in the standardized control chart for u-chart with variable sample size?
a) (frac{u_i+bar{u}}{sqrt{frac{bar{u}}{bar{n}}}})
b) (frac{u_i+bar{u}}{sqrt{frac{bar{u}}{n_i}}})
c) (frac{u_i-bar{u}}{sqrt{frac{bar{u}}{n_i}}})
d) (frac{u_i-bar{u}}{sqrt{frac{bar{u}}{bar{n}}}})
Answer: c
Clarification: The value of a standard statistic used to plot the standardized chart for the u-chart with a variable sample size, is written as,
(frac{u_i-bar{u}}{sqrt{frac{bar{u}}{n_i}}})
12. What is the Upper control limit for the standardized control chart for u-chart with variable sample size?
a) 0
b) 1
c) 1.5
d) 3
Answer: d
Clarification: The upper control limit for the standardized control chart, which is designed for u-chart with variable sample size, is generally set to value 3.
13. The center line of the standardized control chart designed for u-chart, is given by _____
a) 1
b) -3
c) 6
d) 0
Answer: d
Clarification: The center line for the standardized control chart is set to zero. That is why this control chart is named the standardized control chart.
14. The Lower control limit has a 6 unit distance from the upper control limit of the standardized control chart.
a) True
b) False
Answer: a
Clarification: The Upper and lower control limits of the standardized control chart designed for u-chart with variable sample size, have a value of 3 and -3, respectively. So the distance between them is 6 units.
15. Defect or nonconformity data are always lesser informative than fraction nonconforming.
a) True
b) False
