250+ TOP MCQs on Biological Treatment – Anaerobic Systems and Answers

Hazardous Waste Management Multiple Choice Questions on “Biological Treatment – Anaerobic Systems”.

1. Which of the following is the end product of anaerobic degradation?
a) Liquor
b) Nitrogen
c) Lead
d) Sulphur
Answer: a
Clarification: In the absence of aerobic bacteria, anaerobic degradation occurs and decomposed liquor is formed, which requires further treatment.

2. The gases produced from anaerobic degradation process are ________ and ________
a) Nitrogen, sulphur
b) Acetate, nitrate
c) Carbon, methane
d) Methane, sulphur
Answer: c
Clarification: The end products of anaerobic degradation are suspended liquor, and gases mainly comprising of methane and carbon.

3. Non-methanogenic and methane-producing organisms effect anaerobic treatment.
a) True
b) False
Answer: a
Clarification: Effective anaerobic treatment relies on an optimum balance between non-methanogenic and methane-producing organisms to ensure that waste is not retained in liquor form but in gas.

4. The temperature range for anaerobic process is ________ and ______ degree Celsius.
a) 10-20, 20-30
b) 32-37, 40-55
c) 10-40, 40-55
d) 10-50, 20-47
Answer: b
Clarification: The temperature range for aerobic process is 32-37 and 40-55 degree Celsius i.e. the mesophilic and the thermophilic range.

5. Which of the following gas is toxic to methanogenic bacteria?
a) Carbon
b) Sulphur
c) Nitrogen
d) Oxygen
Answer: d
Clarification: Oxygen is toxic to methanogenic bacteria, the waste has to be kept anoxic conditions.

6. Soluble ions of heavy metals are toxic above _______ ppm in industrial waste.
a) 1
b) 2
c) 3
d) 4

Answer: b
Clarification: Soluble ions of heavy metals in industrial waste are toxic above 2 ppm, but their insoluble precipitates are not.

7. Sodium and potassium ions cause strong inhibition above ________ ppm.
a) 10
b) 100
c) 1000
d) 10000
Answer: d
Clarification: Sodium and potassium ions cause strong inhibition above 10000 ppm and Chlorinated hydrocarbons can induce complete failure of a digester at concentrations of 1 ppm.

8. Anaerobic digestion is generally applied to BOD wastes above ________ ppm.
a) 3000
b) 6000
c) 9000
d) 12000
Answer: b
Clarification: To make the process economical, sufficient methane has to be generated to maintain temperature, therefore anaerobic digestion is generally applied to BOD wastes above 6000 ppm.

9. The heat value in a digestion tank of an anaerobic process is _______ kJ/m3.
a) 210
b) 220
c) 230
d) 240
Answer: b
Clarification: The heat value in a digestion tank of an anaerobic process is 220 kJ/m3, with about 0.94 m3 of gas formed per kilogram of VSS destroyed and about 60% methane.

10. Anaerobic treatment is mediated through _______
a) Enzyme catalysis
b) Enzyme
c) Chemical
d) Sulphur
Answer: a
Clarification: Anaerobic treatment is mediated through enzyme catalysis and depends on maintaining a balance of microbial population.

11. The treatability of the hazardous waste depends upon ________ content.
a) Carbon
b) Hydrocarbon
c) Nitrate
d) Sulphur
Answer: b
Clarification: The treatability of the hazardous waste depends upon the susceptibility of the hydrocarbon content to anaerobic biological degradation.

  250+ TOP MCQs on Characterization – Ignitability Test and Answers

12. Which of the following parameters effect operating conditions of anaerobic treatment process?
a) Influent quality
b) Chemicals
c) Hydrocarbon
d) Sulphur
Answer: a
Clarification: Influent quality, the biological activity of the reactor and the quality of the reactor environment effect operating conditions of anaerobic treatment process.

>

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top