250+ TOP MCQs on Different Types of Multivibrators – 1 and Answers

Analog Circuits Multiple Choice Questions on “Different Types of Multivibrators – 1”.

1. What is a square wave generator?
A. Flip-flop
B. Bi-stable multivibrator
C. Astable multivibrator
D. Monostable multivibrator

Answer: C
Clarification: An astable multivibrator is one which does not have any stable state. It has two quasi-stable output states which keep toggling at regular intervals. The output waveform is thus a square wave and this circuit is also called a square wave generator or a free running oscillator.

2. Given the circuit below, find the feedback factor.

A. 3
B. 1/3
C. 4
D. 1/4

Answer: D
Clarification: The feedback factor is β = R1/R1+R2
β = 10k/30k+10k = 1/4.

3. In an astable multivibrator using an op-amp, the feedback factor is 0.5 and the supply voltage is ±12V. What are the quasi-stable output state and the input to the non-inverting terminal?
A. Quasi-stable output = ±12V, Input to non inverting terminal = ±12V
B. Quasi-stable output = ±6V, Input to non inverting terminal = ±12V
C. Quasi-stable output = ±12V, Input to non inverting terminal = ±6V
D. Quasi-stable output = ±12V, Input to non inverting terminal = 0V

Answer: C
Clarification: Quasi-stable output = ±VSat = ± VSupply = ±12V
Input to non inverting terminal = ±βVSat = ±6V.

4. What is the duty cycle of the output of an astable multivibrator?
A. 50%
B. 100%
C. 75%
D. 55%

Answer: A
Clarification: An astable multivibrator is a square wave generator. Charging and discharging times of the capacitor are equal and thus the output waveform has a duty cycle of 50%.

5. Given that the feedback factor of an astable multivibrator is 0.3, find the frequency of the output.

  250+ TOP MCQs on Diode Gates and Rectifiers and Answers

A. 22Hz
B. 20kHz
C. 20Hz
D. 40Hz

Answer: C
Clarification: TO = 2RCln (1 + β/1-β) = 2RCln(1.3/0.7) = 2x10x4x10-3x0.619 = 49.52ms
f = 1/TO = 20Hz.

6. Consider the following circuit and find the time period of the output of the multivibrator.

A. 0.436 ms
B. 0.436 seconds
C. .5 ms
D. 5.22 seconds

Answer: B
Clarification: Since the two feedback resistors are same, then β=0.5.
Thus time period TO = 2RCln3 = 2x20x10x10-3x1.09 = 436ms = 0.436 seconds.

7. How can the duty cycle be changed for an astable multivibrator?
A. By adding another capacitor to the circuit
B. By adding diodes to the circuit
C. By adding an inductor to the circuit
D. The duty cycle cannot be changed

Answer: B
Clarification: To generate a square wave of duty cycle other than 50%, diodes can be connected so that charging and discharging now occurs through these diodes. This thus changes the time period as well as the duty cycle of the diodes.

8. Given that the feedback factor is 0.6, find the time period of the circuit below.

A. 0.331 seconds
B. 0.303 seconds
C. 0.276 seconds
D. 0.606 seconds

Answer: B
Clarification: T = (RXC + RYC.ln(1+β/1-β)
T = 22x10x10-3xln(1.6/0.4) = 22x10x10-3x1.38 = 0.303 seconds.

9. The monostable multivibrator has one quasi-stable state and one unknown state.
A. True
B. False

Answer: B
Clarification: The monostable multivibrator is a circuit whose output has one stable state and one quasi-stable state. If the trigger input is not applied then output remains in the stable state indefinitely and whenever the trigger is applied, the output enters the quasi-stable state. The output then changes back to the stable state on its own after a short duration.

  250+ TOP MCQs on Voltage-Ampere Characteristics of Diode-1 and Answers

10. Which of these is not a type of monostable multivibrator?
A. Schmitt trigger as a monostable multivibrator
B. Emitter coupled monostable multivibrator
C. Using an op-amp
D. 555 Timer as a monostable multivibrator

Answer: A
Clarification: A Schmitt trigger circuit is a comparator circuit, also called a regenerative comparator. It converts any waveform into a square wave. It is not a monostable multivibrator, unlike the other three options.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top