Digital Electronics/Circuits Multiple Choice Questions on “Multiplexers (Data Selectors) – 1”.
1. What is a multiplexer?
A. It is a type of decoder which decodes several inputs and gives one output
B. A multiplexer is a device which converts many signals into one
C. It takes one input and results into many output
D. It is a type of encoder which decodes several inputs and gives one output
Answer: B
Clarification: A multiplexer (or MUX) is a device that selects one of several analog or digital input signals and forwards the selected input into a single line, depending on the active select lines.
2. Which combinational circuit is renowned for selecting a single input from multiple inputs & directing the binary information to output line?
A. Data Selector
B. Data distributor
C. Both data selector and data distributor
D. DeMultiplexer
Answer: A
Clarification: Data Selector is another name of Multiplexer. A multiplexer (or MUX) is a device that selects one of several analog or digital input signals and forwards the selected input into a single line, depending on the active select lines.
3. It is possible for an enable or strobe input to undergo an expansion of two or more MUX ICs to the digital multiplexer with the proficiency of large number of ___________
A. Inputs
B. Outputs
C. Selection lines
D. Enable lines
Answer: A
Clarification: It is possible for an enable or strobe input to undergo an expansion of two or more MUX ICs to the digital multiplexer with the proficiency of large number of inputs.
4. Which is the major functioning responsibility of the multiplexing combinational circuit?
A. Decoding the binary information
B. Generation of all minterms in an output function with OR-gate
C. Generation of selected path between multiple sources and a single destination
D. Encoding of binary information
Answer: C
Clarification: The major functioning responsibility of the multiplexing combinational circuit is generation of selected path between multiple sources and a single destination because it makes the circuit too flexible. A multiplexer (or MUX) is a device that selects one of several analog or digital input signals and forwards the selected input into a single line, depending on the active select lines.
5. What is the function of an enable input on a multiplexer chip?
A. To apply Vcc
B. To connect ground
C. To active the entire chip
D. To active one half of the chip
Answer: C
Clarification: Enable input is used to active the chip, when enable is high the chip works (ACTIVE), when enable is low the chip does not work (MEMORY). However, Enable can be Active-High or Active-Low, indicating it is active either when it is connected to VCC or GND respectively.
6. One multiplexer can take the place of ___________
A. Several SSI logic gates
B. Combinational logic circuits
C. Several Ex-NOR gates
D. Several SSI logic gates or combinational logic circuits
Answer: D
Clarification: A multiplexer (or MUX) is a device that selects one of several analog or digital input signals and forwards the selected input into a single line, depending on the active select lines. Since many operational behaviour can be performed by using a multiplexer. Whereas, a combinational circuit is a combination of many logic gates which makes the circuit more complex.
7. A digital multiplexer is a combinational circuit that selects ___________
A. One digital information from several sources and transmits the selected one
B. Many digital information and convert them into one
C. Many decimal inputs and transmits the selected information
D. Many decimal outputs and accepts the selected information